Used on the following Vehicles: BMW 1 Series 2004 - 2014 E81/82/87/88 116i BMW 3 Series 2001 - 2014 E46/90/91/92/93 316i BMW 5 Series 2007 - 2010 E60/61 316ti Compact BMW X1 2010 - 2012 E84 318i BMW X3 2005 - 2010 E83 118i BMW Z4 2004 - 2009 E85/86 120i 318ti Compact 320i 320si 520i sDrive18i xDrive18i xDrive 20i Engine Codes: 1.6ccN43 B16A/AA, N43 B16AA, N45 B16A, N45T B16AC, N40 B16A, N43 B16AA/O01.8ccN42 B18A, N46 B182.0ccN43 B20K0, N43 B20AY, N46 B20B, N46T B20, N46T B20BZ, N43 B20A, N43 B20AA, N46T B20O2, N42 B20A, N46 B20, N43 B20U0, N46 B18, N43 B20A/AA, N46T B20BD, N45 B20AA, N46T B20B

• Contents:
• 1 x Crankshaft holding tool - OEM 11 9 280
• 1 x Balance shaft alignment tool - OEM 11 5 140
• 1 x Balance shaft alignment tool - OEM 11 8 700
• 1 x Balance shaft alignment tool - OEM 11 9 330

Used on the following Vehicles: BMW 1 Series 2007 - 2015 EfficientDynamics BMW 2 Series 2014 - 2016 114d/116d/118d/120d/123d BMW 3 Series 2007 - 2017 125d/218d/220d/225d BMW 4 Series 2013 - 2017 316d/318d/320d/325d/330d BMW 5 Series 2007 - 2017 320d EfficientDynamics BMW 6 Series 2011 - 2017 420d/425d/418d/520d BMW 7 Series 2008 - 2015 518d/525d/530d/535d BMW X1 2009 - 2015 520d GT/530d GT BMW X3 2007 - 2017 d BMW X5 2012 - 2017 640d/730d BMW X4 2014 - 2017 xDrive BMW X5 2010 - 2017 sDrive BMW X6 2010 - 2017 M550d/750d/M50d BMW X6 2010 - 2017 xDrive Engine Codes: 1.6ccN47 D16C N47 D162.0ccN47 D20A/K0 N47 D20A N47S D20B/D/T0 N47 D20C/K1 N47 D20C N47 D20C/U1 N47 D20C/O1 N47 D20D N47 D20D/T1 N47 D20A/U0 N47T D20K1 N47 D20U0 N47T D20U1 N47T D20O1 N47 D20C/O N47 D20C/01 N47 D20O0 N47S D20D/T0 N47 D20A/O03.0ccN57 D30U0 N57 D30A/O0 N57 D30A/O1 N57 D30B N57 D30A N57 D30UO N57 D30O0 N57 D30O1 N57 D30B/T1 N57 D30TO N57 D30A0/O0 N57 D30T0 N57 D30B/T0 N57 D30C/S1 N57 D30C

• Contents:
• 1 x Crankshaft holding tool - OEM 11 4 320

Used on the following Vehicles: BMW 1 Series 2007 - 2016 118d / 125d BMW 2 Series 2014 - 2016 218d BMW 3 Series 2007 - 2016 220d BMW 4 Series 2013 - 2016 225d BMW 5 Series 2007 - 2016 316d BMW X1 2009 - 2016 420d BMW X3 2007 - 2016 418d BMW X4 2014 - 2016 420d/xDrive BMW X5 2013 - 2016 518d Mini Clubman 2015 - 2016 sDrive16d Mini Hatch 2014 - 2016 sDrive 18d Mini Hatch 2014 - 2016 sDrive20d Mini Hatch 2014 - 2016 sDrive25d Mini Hatch 2014 - 2016 xDrive 18d Mini Hatch 2014 - 2016 xDrive 20d Mini Hatch 2014 - 2016 xDrive23d Mini Hatch 2014 - 2016 xDrive 25d Mini Hatch 2014 - 2016 116d Mini Hatch 2014 - 2016 120d Mini Hatch 2014 - 2016 123d Mini Hatch 2014 - 2016 114d Mini Hatch 2014 - 2016 318d Mini Hatch 2014 - 2016 320d Mini Hatch 2014 - 2016 325d Mini Hatch 2014 - 2016 425d Mini Hatch 2014 - 2016 520d Mini Hatch 2014 - 2016 525d/xDrive Mini Hatch 2014 - 2016 Cooper S/SD/D Mini Hatch 2014 - 2016 JCW Engine Codes: 2,0ccB47 D20A, B47 C20A, B48 A20B, B47, B47 C20, B48 A20A, N47 D20A/K0, N47 D20A, N47S D20B/D/T0, N47 D16C, N47 D16, N47 D20C/K1, N47 D20C, N47 D20C/U1, N47 D20C/O1, N47 D20D/T1, N47 D20D, N47 D20A/U0, N47T D20K1, N47 D20U0, N47T D20U1, N47T D20O1, N47 D20C/O, N47 D20C/01, N47 D20O0, N47S D20D/T0, N47 D20A/O0

• Contents:
• 1 x Base assembly - N/A
• 1 x Boss assembly B47/B48 x 2 - OEM 2 288 054
• 1 x Boss assembly N47 x 2 - OEM 11 8 750
• 2 x Fixing screws - N/A
• 1 x HT bolt M10 x 50 - N/A

Used on the following Vehicles: BMW 1 Series (F20/21) 2015 - 2017 BMW 2 Series (F22/F23/F45/F46) 2014 - 2017 BMW 3 Series (F30/31) 2015 - 2017 BMW i8 (I12) 2014 - 2017 BMW X1 (F48) 2015 - 2017 Mini Clubman (F54) 2015 - 2017 Mini Convertible (F57) 2016 - 2017 Mini Mini Hatch (F55/F56) 2014 - 2017 Engine Codes: 1.2ccB38 A12A1.5ccB38 B15A, B38 A15A, B38 K15A, B37 D15A, B37 C15A

• Contents:
• 1 x Balancer shaft removal tool - OEM 2 288 943
• 1 x Balancer shaft locking tool - OEM 2 358 646
• 1 x Balancer shaft locking tool - OEM 2 288 942

Used on the following Vehicles: BMW 1 Series 118i (E81/82/87/88) 2004 - 2014 BMW 1 Series 120i (E81/82/87/88) 2004 - 2014 BMW 3 Series 316i (E46) 2001 - 2007 BMW 3 Series 318i (E46) 2001 - 2007 BMW 3 Series 318i (E90/91/92/93) 2005 - 2011 BMW 3 Series 320i (E90/91/92/93) 2005 - 2014 BMW 5 Series 520i (E60/E61) 2007 - 2010 BMW X1 xDrive18i (E84) 2010 - 2012 BMW X3 xDrive 20i (E84) 2005 - 2010 BMW Z4 2.0 (E84/E86) 2004 - 2009 Engine Codes: 1.8ccN42 B18A, N46 B182.0ccN42 B20A, N46 B20, N46 B20B, N46T B20, N46T B20B, N46T B20BD, N46T B20BZ, N46T B20O2

• Contents:
• 1 x Crankshaft locking pin - OEM 11 5 120 and 11 2 300
• 2 x Washers for C - OEM N/A
• 2 x M6 x 55 H.T. set screw - OEM N/A
• 1 x Exhaust camshaft alignment tool - OEM 11 9 291
• 1 x Screw for J - OEM N/A
• 1 x Flywheel locking pin - OEM 11 9 190
• 1 x M8 x 25mm cap screw - OEM N/A
• 3 x M6 x 30 setscrews
• 1 x Inlet camshaft alignment tool - OEM 11 9 292
• 1 x Timing chain pre tensioner tool - OEM 11 9 340
• 1 x Vanos sensor gear alignment tool - OEM 11 9 350

Used on the following Vehicles: BMW 1 Series 2015 - 2017 BMW 2 Series 2014 - 2017 BMW 3 Series 2015 - 2017 BMW 4 Series 2015 - 2017 BMW 5 Series 2014 - 2017 BMW X1 2015 - 2017 BMW X3 2014 - 2017 BMW X4 2014 - 2017 BMW X5 2015 - 2017 Mini Clubman 2015 - 2017 Mini Convertible 2016 - 2017 Mini Mini Hatch 2014 - 2017 Engine Codes: 1.5ccB37 D15A, B37 C15A2.0ccB47 D20A, B47 D20B, B47 C20A, B47, B47 C20B

• Contents:
• 1 x Tensioner locking pin - OEM 11 4 120
• 1 x Crankshaft holding tool - OEM 2 357 904
• 1 x A/T drive plate timing pin adapter - OEM 2 365 488
• 1 x Flywheel/drive plate timing pin - OEM 2 288 380
• 1 x Camshaft alignment tool BMW - OEM 11 8 760
• 1 x High pressure fuel pimp sprocket removal tool - OEM 11 8 740, OEM 11 8 030

Used on the following Vehicles: Mini - Clubman (R55) - 2007 - 2014 One/First Mini - Clubvan (R55) - 2012 - 2014 Cooper Mini - Countryman (R60) - 2010 - 2017 Ray Mini - Coupe (R58) - 2011 - 2015 Cooper S Mini - Mini (R56/57) - 2006 - 2015 JCW Mini - Paceman (R61) - 2013 - 2017 JCW Mini - Roadster (R59) - 2012 - 2015 JCW Engine Codes: 1.4ccN12 B14AB, N12 B141.6ccN12 B16A, N16 B16A, N16 B16M0, N16 B16U0, N16 B16A/M0, N16 B16K0, N16 B16A/MO, N18 B16A, N18 B16A/M0, N18 B16C, N18 B16A/MO, N18, N18 B16M0, N18 B16C/TO

• Contents:
• 1 x Camshaft drive chain wear indicator tool - OEM 2 353 281

Used on the following Vehicles: BMW 1 Series 2004 - 2009 (E81/82/87/88) 116i BMW 3 Series 2002 - 2007 (E46) 316i BMW 3 Series 2005 - 2010 (E90/91/92/93) 316ti Compact Engine Codes: 1.6ccN45 B16A, N45T B16AC, N40 B16A

• Contents:
• 1 x Camshaft Locking Tool - Inlet - OEM 11 7 252
• 1 x Camshaft Locking Tool - Exhaust - OEM 11 7 251
• 1 x Flywheel Setting Pin - OEM 11 9 190
• 1 x Vanos Sensor Alignment Tool - OEM 11 7 260
• 3 x M6 x 30 Set Screws - OEM N/A
• 1 x Tensioner Pre - Load Tool - OEM 11 9 340/11 9 341
• 2 x M6 x 55 Set screws and Washers - OEM N/A
• 1 x M8 X 25 Cap Head Screw - OEM N/A

Used on the following Vehicles: BMW 1 Series 2007 - 2014 BMW 1 Series 2011 - 2015 BMW 2 Series Coupe 2014 - 2016 BMW 3 Series 2007 - 2014 BMW 3 Series 2012 - 2017 BMW 3 Series G T 2013 - 2016 BMW 4 Series Cabriolet 2014 - 2017 BMW 4 Series Coupe 2013 - 2017 BMW 4 Series G Coupe 2014 - 2017 BMW 5 Series 2007 - 2010 BMW 5 Series 2010 - 2017 BMW 5 Series G T 2009 - 2017 BMW 6 Series 2011 - 2017 BMW 6 Series G Coupe 2012 - 2017 BMW 7 Series 2008 - 2015 BMW X1 2009 - 2015 BMW X3 2007 - 2010 BMW X3 2011 - 2017 BMW X4 2014 - 2017 BMW X5 2013 - 2016 BMW X5 2010 - 2013 BMW X5 2013 - 2017 BMW X6 2010 - 2014 BMW X6 2014 - 2017 Mini Clubman 2015 - 2017 Mini Convertible 2016 - 2017 Mini Mini Hatch 2014 - 2017 Mini Mini Hatch 2014 - 2017 Mini Clubman 2010 - 2014 Mini Clubvan 2012 - 2014 Mini Countryman 2010 - 2017 Mini Mini 2010 - 2015 Mini Paceman 2013 - 2017 Mini Coupe 2011 - 2015 Mini Roadster 2012 - 2015 Engine Codes: 1.6ccN47 D16C, N47 D16, N47 C16U1, N47 C16K1, N47 C16A/U12.0ccN47 D20A/K0, N47 D20A, N47S D20B/D/T0, N47 D20C/K1, N47 D20C, N47 D20C/U1, N47 D20C/O1, N47 D20D, N47 D20D/T1, N47 D20A/U0, N47T D20K1, N47 D20U0, N47T D20U1, N47T D20O1, N47 D20C/O, N47 D20C/01, N47 D20O0, N47S D20D/T0, N47 D20A/O0, N47 C20K1, N47 C20U1, N47 C20A/K13.0ccN57 D30U0, N57 D30A/O0, N57 D30A/O1, N57 D30B, N57 D30A, N57 D30UO, N57 D30O0, N57 D30O1, N57 D30B/T1, N57 D30TO, N57 D30C/S1, N57 D30A0/O0, N57 D30T0, N57 D30C, N57 D30B/T0

• Contents:
• 1 x Crankshaft pulley turning tool - OEM 11 6 480
• 1 x High - pressure fuel pump sprocket removel tool - OEM 11 8 740/030
• 1 x Flywheel plate timing pin - OEM 11 5 320
• 1 x Camshaft alignment tool - OEM 11 8 760
• 2 x Loop pin - OEM 11 3 340

Used on the following vehicles: BMW 1 Series 2006 and 2014 BMW 3 Series 2007 and 2011 BMW 5 Series 2007 and 2010 Engine Codes: 1.6ccN43 B16A/AA, N43 B16AA, N43 B16AA/O02.0ccN43 B20K0, N43 B20AY, N43 B20A, N43 B20AA, N43 B20U0, N43 B20A/AA

• Contents:
• 1 x Camshaft alignment tool - OEM 11 8 691/2/3
• 1 x Vanos/camshaft sensor setting tool - OEM 11 8 711/12
• 1 x Balance shaft alignment tool - OEM 11 8 700
• 1 x Timing chain pre - tensioner tool - OEM 11 9 340
• 1 x Flywheel timing pin - OEM 11 5 120
• 2 x Chain tensioner locking pins - OEM 11 3 340

Crankshaft turning and flywheel locking tool. Designed to turn the crankshaft without removing the pulley fixing bolts. Flywheel locking plate fits manual and automatic gearbox vehicles. Suitable for petrol and diesel engines. Supplied in a storage case with warning tag and instructions.

• Crankshaft turning and flywheel locking tool.
• Designed to turn the crankshaft without removing the pulley fixing bolts.
• Flywheel locking plate fits manual and automatic gearbox vehicles.
• Suitable for petrol and diesel engines.
• Supplied in a storage case with warning tag and instructions.
• Model No. VSE2398

Suitable for setting and locking popular BMW petrol engines. Kit comprises camshaft locking tools and flywheel locking pin.

Essential tool for holding the flywheel when releasing and tightening the vibration damper central bolts on BMW M47T2, M57T2, M57TU, M67, N20, N26, N43, N45, N45T, N46, N46T, N47, N51, N52, N53, N54 & Mini W17 diesel/petrol chain drive engines. The tool can also be used to hold the flywheel when removing the timing chain for cylinder head work.

Removes the diesel pump and retains the pump sprocket in situ so that the sprockets/timing chain configuration remains undisturbed, minimizing the level of engine disassembly. For engine timing use Timing Tool Kit Model No. VSE5666.

Camshaft setting and flywheel locking tools to cover BMW M47/TU/T2 and M57/TU/T2 diesel engines used in BMW, Land Rover, MG/Rover and Vauxhall/Opel models. Supplied in storage case.

Suitable for setting and adjusting the timing on N42 and N46 engines with the Valvetronic system. Also includes tools to align the twin Vanos unit.

• Suitable for setting and adjusting the timing on N42 and N46 engines with the Valvetronic system.
• Also includes tools to align the twin Vanos unit.
• Model No. VSE5911A

Specifically designed to aid the task of reaching the auxiliary belt tension unit in order to remove and re-fit auxiliary belts on the Di/TDdi/TDCi engines. In many cases tension unit cannot be accessed and adjusted with general tools.

Covers a wide range of BMW & Mini Chain Drive Petrol Engines. Includes the necessary tools for setting and locking the camshafts and crankshaft, and a tool for setting the timing chain pre-tension.

• Covers a wide range of BMW & Mini Chain Drive Petrol Engines.
• Includes the necessary tools for setting and locking the camshafts and crankshaft, and a tool for setting the timing chain pre-tension.
• Model No. VSE5982

Suitable for setting and adjusting the timing on 1.6 & 2.0 BMW N43 petrol engines. Kit contains the necessary tools for aligning the Vanos units on the inlet and exhaust camshafts.

Crankshaft holding tool for BMW N47/N57 diesel engines. Essential for securing the crankshaft when replacing the timing chain.

Essential tools for timing the BMW, BMW Mini 1.5D, 2.0D and 3.0D chain drive diesel engines. Kit includes camshaft setting plate, flywheel locking pin, crankshaft turning tool, and is suitable for the new generation of modular engines. Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications on N47/N57 engines. Supplied in storage case with instructions and warning tag.

• Essential tools for timing the BMW, BMW Mini 1.5D, 1.6D, 2.0D and 3.0D chain drive diesel engines.
• Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool, also suitable for the new generation of modular engines.
• Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications on N47/N57 engines.
• Supplied in storage case with instructions and warning tag.
• Model No. VSE6121A

Fits the new generation of BMW modular petrol engines. Contains the tools required to set and lock the engine and for valve timing checking and adjusting.

• Fits the new generation of BMW modular petrol engines.
• Contains the tools required to set and lock the engine and for valve timing checking and adjusting.
• Model No. VSE6122

Essential tools for the removal/installation of the timing chain assembly on a range of BMW, Mini and PSA petrol engines. Kit includes balance shaft aligners, crankshaft gear holding tools and chain tensioner locking pin. Engine Timing Tool Kits covering engine timing are available separately for each engine.

Covers a wide range of BMW 2.0 litre petrol engines. Includes the necessary tools for setting and locking the camshafts and crankshaft. Includes tools for setting the Vanos unit position and for setting the timing chain pre-tension.

Suitable for BMW N20 and N26 2.0L engines. Use in conjunction with Model No. VSE6188 Timing Tool Kit. Supplied in a storage case with instructions.

• Suitable for BMW N20 and N26 2.0L engines.
• Use in conjunction with Model No. VSE6188 Timing Tool Kit.
• Supplied in a storage case with instructions.
• Model No. VSE6198

• • Suitable for BMW N20 and N26 2.0L engines. • Use in conjunction with Model No. VSE6188 Timing Tool Kit. • Supplied in a storage case with instructions. • Model No. VSE6198

Two piece spanner set covering both sizes of belt tensioner fitted to a wide range of BMW Mini engines. Slimline design for access where space is limited. Sturdy handle also has a 1/2"Sq drive if required.

• Two piece spanner set covering both sizes of belt tensioner fitted to a wide range of BMW Mini engines.
• Slimline design for access where space is limited.
• Sturdy handle also has a 1/2"Sq drive if required.
• Model No. VSE6211