For cleaning of motorcycle chains whilst in-situ. Comprises bottle for holding cleaning fluid, plastic tube, Y piece adaptor and chain bath with cleaning brushes. Easy set up; bath is clamped over chain and the bottle connected to bath via plastic tubes and chain cleaned. Waste fluid is then drained away. Display carton.

Expert Quality, for the removal of hollow wheel spindles. Hexagon sizes on tool: 17, 19, 22, 24mm with internal 3/8" square drive in the 19mm hex end. Display packed.

Expert Quality, for the removal of seized pistons without damaging outer piston surface. Knurled clamp blocks allow secure grip of inner piston face. Self - locking mechanism ensures tight grip on piston during removal. Display packed.

Expert Quality, for splitting chains from No.25 cam chains through to No.520 motorcycle final drive chains. Please note, to successfully press the rivet from heavy duty 520 drive chains, the rivet head must be ground off first. Display packed in blow mould storage case.

• Contents:
• 1 x Main press body
• 1 x clamp and pressure screw handle
• 1 x Sliding 'T' bar
• 2 x Press plates
• 2 x Press anvils
• 3 x Press pins: 2.2, 2.9, 3.8mm
• 1 x Rivet tip spreader
• 1 x Upper and lower guides for 2.2 mm press pin
• 1 x Spring for press pins

One man bleeding/servicing of hydraulic brakes and clutches. The kit utilizes a small weighted non-return valve and a connector hose that attaches to the scooter or motorcycle bleed nipple. As the brake/clutch are bled, the valve prevents the used fluid and air being drawn back into the system.

Extract brake caliper pistons without risk of damage to outer face of piston. Fast and simple operation. Features detachable slide hammer for impact removal. The kit includes 12 adaptors to suit different sized pistons.

• Designed to reduce the time taken when removing piston from motorcycle brake calipers.
• Extract brake caliper pistons without risk of damage to outer face of piston.
• Includes 12 adaptors to suit different sized pistons.
• Detachable slide hammer for impact removal.
• Capacity: Ø19-30mm.
• Model No. MS162

Composite 100ml collection bottle with magnetic locating pad. Supplied with non-return valve, tubes and connectors.

• Composite collection bottle with magnetic locating pad.
• Capacity: 100ml.
• Supplied with non-return valve, tubes and connectors.
• Model No. VS02011

Extract brake caliper pistons without risk of damage to outer face of piston. Fast and simple operation. Clamp screw allows pliers to be fixed into cup of piston for added pulling power.

• Extract brake caliper pistons without risk of damage.
• Serrated pressure blocks for non-slip operation.
• Clamp screw allows pliers to be fixed into cup of piston for added pulling power.
• Capacity: Ø18 - 43.5mm.
• Model No. VS1806

Extract brake caliper pistons without risk of damage to outer face of piston. Fast and simple operation with a self-ratcheting system that allows pliers to automatically lock into cup of piston for added pulling power. Serrated pressure blocks for non-slip operation.

• Extract brake caliper pistons without risk of damage to outer face of piston.
• Fast and simple operation.
• Self-ratcheting system allows pliers to automatically lock into cup of piston for added pulling power.
• Serrated pressure blocks for non-slip operation.
• Capacity: Ø16.5-39mm.
• Model No. VS1806R