Blue self-stripping blade splice connector from TruConnect. The blade splice is crimped over the cable with pliers, a 6.3mm push-on blade can then be inserted into the female blade socket.
Blue self-stripping tap splice connector from TruConnect. Tap splice is placed over existing wire, the additional wire inserted and the connector then crimped with pliers.
Red self-stripping tap splice connector from TruConnect. Tap splice is placed over existing wire, the additional wire inserted and the connector then crimped with pliers.
The 221 Series from WAGO – Flexible, Fast and Safe
Inline Slicing Connector with lever; for all conductor types; max. 4 mm²; 2-conductor; transparent housing; Transparent cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
These connectors can be used with solid, stranded or fine stranded conductors. They are easy to use by simply pulling up the lever, inserting the stripped conductor, and then pushing back down. This simple system saves time on installations and ensures a good connection is made that can be visually checked using the transparent case.
This tool-free, lever-actuated connector is suitable for a wide variety of electrical installation applications. The slim design makes it suitable for space restricted applications.Ideal for use in lab and test set-ups.
2-Wire connector
Quick and simple to use
Slim design saves space in tight areas
Easily terminate conductors from 0.2 to 4 mm²
Inline connection of solid, stranded and fine-stranded conductors
Quickly install devices with high levels of power consumption
Safely install long cable runs with larger conductor cross sections
Mounting carriers available, use for fixed and multi-pole wiring
The 221 Series from WAGO – Flexible, Fast and Safe
COMPACT Splicing Connector; for all conductor types; max. 4 mm²; 2-conductor; with levers; transparent housing; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
Quick and Easy to use. Opening the levers on the 221 Series requires little effort. This means you can connect conductors quickly – without tools. Simply pull up the lever, insert the stripped conductor and push the lever back down.The transparent housing allows you to clearly see if the wires are stripped to the correct length and connected properly. The connector has two test slots located below where the WAGO imprint appears: one in the conductor entry direction and one on the opposite side. This allows easy testing, even when installed.
This tool-free, lever-actuated connector is suitable for a wide variety of industrial applications.
2-Wire Connector
Ease of use – pull the lever up, insert a conductor and push the lever back down
Available as 2-, 3- and 5-wire connectors
Easily terminate conductors from 0.14 to 4 mm²
Connect solid, stranded and fine-stranded conductors
Save time for installers and device manufacturers
Quickly install devices with higher power consumption
Safely install long cable runs with larger conductor cross sections
The 221 Series from WAGO – Flexible, Fast and Safe
COMPACT Splicing Connector; for all conductor types; max. 4 mm²; 3-conductor; with levers; transparent housing; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
Quick and Easy to use. Opening the levers on the 221 Series requires little effort. This means you can connect conductors quickly – without tools. Simply pull up the lever, insert the stripped conductor and push the lever back down.The transparent housing allows you to clearly see if the wires are stripped to the correct length and connected properly. The connector has two test slots located below where the WAGO imprint appears: one in the conductor entry direction and one on the opposite side. This allows easy testing, even when installed.
This tool-free, lever-actuated connector is suitable for a wide variety of industrial applications.
3-Wire Connector
Ease of use – pull the lever up, insert a conductor and push the lever back down
Available as 2-, 3- and 5-wire connectors
Easily terminate conductors from 0.14 to 4 mm²
Connect solid, stranded and fine-stranded conductors
Save time for installers and device manufacturers
Quickly install devices with higher power consumption
Safely install long cable runs with larger conductor cross sections
The 221 Series from WAGO – Flexible, Fast and Safe
COMPACT Splicing Connector; for all conductor types; max. 4 mm²; 5-conductor; with levers; transparent housing; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
Quick and Easy to use. Opening the levers on the 221 Series requires little effort. This means you can connect conductors quickly – without tools. Simply pull up the lever, insert the stripped conductor and push the lever back down.The transparent housing allows you to clearly see if the wires are stripped to the correct length and connected properly. The connector has two test slots located below where the WAGO imprint appears: one in the conductor entry direction and one on the opposite side. This allows easy testing, even when installed.
This tool-free, lever-actuated connector is suitable for a wide variety of industrial applications.
5-Wire Connector
Ease of use – pull the lever up, insert a conductor and push the lever back down
Available as 2-, 3- and 5-wire connectors
Easily terminate conductors from 0.14 to 4 mm²
Connect solid, stranded and fine-stranded conductors
Save time for installers and device manufacturers
Quickly install devices with higher power consumption
Safely install long cable runs with larger conductor cross sections
The 221 Series from WAGO – Flexible, Fast and Safe
COMPACT Splicing Connector; for all conductor types; max. 6 mm²; 2-conductor; with levers; transparent housing; Surrounding air temperature: max 85°C (T85); 6,00 mm²; transparent
Quick and Easy to use. Opening the levers on the 221 Series requires little effort. This means you can connect conductors quickly – without tools. Simply pull up the lever, insert the stripped conductor and push the lever back down.The transparent housing allows you to clearly see if the wires are stripped to the correct length and connected properly. The connector has two test slots located below where the WAGO imprint appears: one in the conductor entry direction and one on the opposite side. This allows easy testing, even when installed.
This tool-free, lever-actuated connector is suitable for a wide variety of industrial applications.
2-Wire Connector
Ease of use – pull the lever up, insert a conductor and push the lever back down
Available as 2-, 3- and 5-wire connectors
Easily terminate conductors from 0.5 to 6 mm²
Connection of all conductor types
Save time for installers and device manufacturers
Quickly install devices with higher power consumption
Safely install long cable runs with larger conductor cross sections
The 221 Series from WAGO – Flexible, Fast and Safe
COMPACT Splicing Connector; for all conductor types; max. 6 mm²; 3-conductor; with levers; transparent housing; Surrounding air temperature: max 85°C (T85); 6,00 mm²; transparent
Quick and Easy to use. Opening the levers on the 221 Series requires little effort. This means you can connect conductors quickly – without tools. Simply pull up the lever, insert the stripped conductor and push the lever back down.The transparent housing allows you to clearly see if the wires are stripped to the correct length and connected properly. The connector has two test slots located below where the WAGO imprint appears: one in the conductor entry direction and one on the opposite side. This allows easy testing, even when installed.
This tool-free, lever-actuated connector is suitable for a wide variety of industrial applications.
The 221 series, is available in 2, 3, and 5 connector versions.
3-Wire Connector
Ease of use – pull the lever up, insert a conductor and push the lever back down
Available as 2-, 3- and 5-wire connectors
Easily terminate conductors from 0.5 to 6 mm²
Connection of all conductor types
Save time for installers and device manufacturers
Quickly install devices with higher power consumption
Safely install long cable runs with larger conductor cross sections
The 221 Series from WAGO – Flexible, Fast and Safe
COMPACT Splicing Connector; for all conductor types; max. 6 mm²; 5-conductor; with levers; transparent housing; Surrounding air temperature: max 85°C (T85); 6,00 mm²; transparent
Quick and Easy to use. Opening the levers on the 221 Series requires little effort. This means you can connect conductors quickly – without tools. Simply pull up the lever, insert the stripped conductor and push the lever back down.The transparent housing allows you to clearly see if the wires are stripped to the correct length and connected properly. The connector has two test slots located below where the WAGO imprint appears: one in the conductor entry direction and one on the opposite side. This allows easy testing, even when installed.
This tool-free, lever-actuated connector is suitable for a wide variety of industrial applications.
5-Wire Connector
Ease of use – pull the lever up, insert a conductor and push the lever back down
Available as 2-, 3- and 5-wire connectors
Easily terminate conductors from 0.5 to 6 mm²
Connection of all conductor types
Save time for installers and device manufacturers
Quickly install devices with higher power consumption
Safely install long cable runs with larger conductor cross sections
CLASSIC Splicing Connector; for all conductor types; max. 4 mm²; 2-conductor; with levers; grey housing; Surrounding air temperature: max 40°C; 2,50 mm²; grey
The WAGO Series 222 2-Wire Classic splicing connector is the easiest way to connect and disconnect cables and wires. Simply open the orange-coloured operating lever until it clicks into place, insert the stripped conductor, and place the lever back into the start position. This connector is highly reliable, ensuring connection every time.
2-Wire Connector
Ease of use – pull the lever up, insert a conductor and push the lever back down
Available as 2-, 3- and 5-wire connectors
Easily terminate conductors from 0.08 to 2.5mm² (solid/stranded) or 0.8 to 4 mm² (fine-stranded)
Connect solid, stranded and fine-stranded conductors
CLASSIC Splicing Connector; for all conductor types; max. 4 mm²; 3-conductor; with levers; grey housing; Surrounding air temperature: max 40°C; 2,50 mm²; grey
The WAGO Series 222 3-Wire Classic splicing connector is the easiest way to connect and disconnect cables and wires. Simply open the orange-coloured operating lever until it clicks into place, insert the stripped conductor, and place the lever back into the start position. This connector is highly reliable, ensuring connection every time.
3-Wire Connector
Ease of use – pull the lever up, insert a conductor and push the lever back down
Available as 2-, 3- and 5-wire connectors
Easily terminate conductors from 0.08 to 2.5mm² (solid/stranded) or 0.8 to 4 mm² (fine-stranded)
Connect solid, stranded and fine-stranded conductors
CLASSIC Splicing Connector; for all conductor types; max. 4 mm²; 5-conductor; with levers; grey housing; Surrounding air temperature: max 40°C; 2,50 mm²; grey
The WAGO Series 222 5-Wire Classic splicing connector is the easiest way to connect and disconnect cables and wires. Simply open the orange-coloured operating lever until it clicks into place, insert the stripped conductor, and place the lever back into the start position. This connector is highly reliable, ensuring connection every time.
5-Wire Connector
Ease of use – pull the lever up, insert a conductor and push the lever back down
Available as 2-, 3- and 5-wire connectors
Easily terminate conductors from 0.08 to 2.5mm² (solid/stranded) or 0.8 to 4 mm² (fine-stranded)
Connect solid, stranded and fine-stranded conductors
The 2273 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid conductors; max. 2.5 mm²; 2-conductor; transparent housing; white cover; Surrounding air temperature: max 60°C (T60); 2,50 mm²; transparent
These compact PUSH WIRE® connectors can be used with solid copper conductors and are suitable for use with junction boxes.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case.
The 2273 series is available in 2, 3, 4, 5, and 8 connector versions.
2 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 2 solid/stranded conductors
Easily terminate conductors from 0.5 to 2.5 mm² (solid)
Any combination of conductor sizes within the size range is possible
The 2273 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid conductors; max. 2.5 mm²; 3-conductor; transparent housing; orange cover; Surrounding air temperature: max 60°C (T60); 2,50 mm²
These compact PUSH WIRE® connectors can be used with solid copper conductors and are suitable for use with junction boxes.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case.
The 2273 series is available in 2, 3, 4, 5, and 8 connector versions.
3 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 3 solid/stranded conductors
Easily terminate conductors from 0.5 to 2.5 mm² (solid)
Any combination of conductor sizes within the size range is possible
The 2273 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid conductors; max. 2.5 mm²; 4-conductor; transparent housing; red cover; Surrounding air temperature: max 60°C (T60); 2,50 mm²; transparent
These compact PUSH WIRE® connectors can be used with solid copper conductors and are suitable for use with junction boxes.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case.
The 2273 series is available in 2, 3, 4, 5, and 8 connector versions.
4 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 4 solid/stranded conductors
Easily terminate conductors from 0.5 to 2.5 mm² (solid)
Any combination of conductor sizes within the size range is possible
The 2273 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid conductors; max. 2.5 mm²; 5-conductor; transparent housing; yellow cover; Surrounding air temperature: max 60°C (T60); 2,50 mm²; transparent
These compact PUSH WIRE® connectors can be used with solid copper conductors and are suitable for use with junction boxes.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case.
The 2273 series is available in 2, 3, 4, 5, and 8 connector versions.
5 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 5 solid/stranded conductors
Easily terminate conductors from 0.5 to 2.5 mm² (solid)
Any combination of conductor sizes within the size range is possible
The 2273 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid conductors; max. 2.5 mm²; 8-conductor; transparent housing; light grey cover; Surrounding air temperature: max 60°C (T60); 2,50 mm²; transparent
These compact PUSH WIRE® connectors can be used with solid copper conductors and are suitable for use with junction boxes.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case.
The 2273 series is available in 2, 3, 4, 5, and 8 connector versions.
8 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 4 solid/stranded conductors
Easily terminate conductors from 0.5 to 2.5 mm² (solid)
Any combination of conductor sizes within the size range is possible
The 2773 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid and stranded conductors; max. 4 mm²; 2-conductor; transparent housing; white cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
These PUSH WIRE® connectors can be used with solid copper or stranded conductors.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case. The connector has a test slot located opposite the conductor entry direction. This allows easy testing, even when installed.
The 2773 series is available in 2, 3, 4, 5, 6, and 8 connector versions.
2 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 2 solid/stranded conductors
Easily terminate conductors from 0.75 to 4 mm² (solid) or 1.5 to 4mm² (stranded)
Any combination of conductor sizes within the size range is possible
The 2773 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid and stranded conductors; max. 4 mm²; 3-conductor; transparent housing; orange cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
These PUSH WIRE® connectors can be used with solid copper or stranded conductors.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case. The connector has a test slot located opposite the conductor entry direction. This allows easy testing, even when installed.
The 2773 series, is available in 2, 3, 4, 5, 6, and 8 connector versions.
3 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 3 solid/stranded conductors
Easily terminate conductors from 0.75 to 4 mm² (solid) or 1.5 to 4mm² (stranded)
Any combination of conductor sizes within the size range is possible
The 2773 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid and stranded conductors; max. 4 mm²; 4-conductor; transparent housing; red cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
These PUSH WIRE® connectors can be used with solid copper or stranded conductors.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case. The connector has a test slot located opposite the conductor entry direction. This allows easy testing, even when installed.
The 2773 series, is available in 2, 3, 4, 5, 6, and 8 connector versions.
4 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 4 solid/stranded conductors
Easily terminate conductors from 0.75 to 4 mm² (solid) or 1.5 to 4mm² (stranded)
Any combination of conductor sizes within the size range is possible
The 2773 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid and stranded conductors; max. 4 mm²; 5-conductor; transparent housing; yellow cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
These PUSH WIRE® connectors can be used with solid copper or stranded conductors.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case. The connector has a test slot located opposite the conductor entry direction. This allows easy testing, even when installed.
The 2773 series, is available in 2, 3, 4, 5, 6, and 8 connector versions.
5 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 5 solid/stranded conductors
Easily terminate conductors from 0.75 to 4 mm² (solid) or 1.5 to 4mm² (stranded)
Any combination of conductor sizes within the size range is possible
The 2773 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid and stranded conductors; max. 4 mm²; 6-conductor; transparent housing; grey cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
These PUSH WIRE® connectors can be used with solid copper or stranded conductors.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case. The connector has a test slot located opposite the conductor entry direction. This allows easy testing, even when installed.
The 2773 series, is available in 2, 3, 4, 5, 6, and 8 connector versions.
6 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 6 solid/stranded conductors
Easily terminate conductors from 0.75 to 4 mm² (solid) or 1.5 to 4mm² (stranded)
Any combination of conductor sizes within the size range is possible
The 2773 Series connector from WAGO offers convenient wiring in a compact design.
COMPACT splicing connector; for solid and stranded conductors; max. 4 mm²; 8-conductor; transparent housing; light grey cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent
These PUSH WIRE® connectors can be used with solid copper or stranded conductors.
Quick and Easy to use. Simply push the stripped conductor into the connector. Once the conductor is pushed in fully, the connector grips and terminates the conductor. This simple system saves time on installation and ensures a good connection is made that can be visually checked using the transparent case. The connector has a test slot located opposite the conductor entry direction. This allows easy testing, even when installed.
The 2773 series, is available in 2, 3, 4, 5, 6, and 8 connector versions.
8 Wire connector
Quick and simple to use
Extremely Compact design
Push-in termination of up to 8 solid/stranded conductors
Easily terminate conductors from 0.75 to 4 mm² (solid) or 1.5 to 4mm² (stranded)
Any combination of conductor sizes within the size range is possible
The Electronics in Meccano Circuits Shop is an affiliate of Rapid Electronics, and any purchases you make help support this website without affecting the price you pay! Any enquiries regarding products or order status should be directed to Rapid Electronics at www.rapidonline.com.