A room sensor style enclosure designed for wall mount applications.

• Size 86 x 86 x 25.5mm
• Moulded in RAL 9003 white ABS UL94-V0
• Front and back clip together (tool required for disassembly once wall mounted)
• Internal PCB Mount pillars moulded into the front and back sections of the housing
• Internal clips for snap-in PCB
• Recessed front face for overlay
• Recessed rear face for additional labelling
• Rear knockout for cable entry (20mm dia)
• Multiple mounting options, including single-gang UK plug back-box mount points
• Option for custom embossing on the front face
• Operating temperature range -10 to +80°C
• CamdenBoss type CBRS01SWH

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

A vented room sensor style enclosure designed for wall mount applications.

• Size 86 x 86 x 25.5mm
• Moulded in RAL 9003 white ABS UL94-V0
• Front and back clip together (tool required for disassembly once wall mounted)
• Internal PCB Mount pillars moulded into the front and back sections of the housing
• Internal clips for snap-in PCB
• Recessed front face for overlay
• Recessed rear face for additional labelling
• Rear knockout for cable entry (20mm dia)
• Multiple mounting options, including single-gang UK plug back-box mount points
• Option for custom embossing on the front face
• Operating temperature range -10 to +80°C
• CamdenBoss type CBRS01VWH

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

This white ABS sensor case from Evatron has internal PCB mounting points and pre-drilled wall mounting points, plus a screw fixing on one side.

• Fixed together with two screws (supplied)
• Height: 21mm
• Width: 80mm
• Depth: 80mm
• Manufacturer's part EN30STW

Neatly styled, low-profile sensor case with ventilation slots from the Evatron EN30 series, allowing free airflow for thermostats, temperature, gas, humidity sensors, etc.

• Back-plate has mounting holes 50mm apart, compatible with standard electrical conduit fittings
• Can be fixed directly to a wall
• Moulded-in bosses in top cover for PCB mounting
• Top cover is snap-fit and has no visible screws
• Dimensions: 80 x 80 x 20.5mm
• Colour: white

This sensor case from Evatron Has ventilated sides, allowing free airflow for temperature, gas, humidity sensors and thermostats.

• Moulded in flame-retardant non-reflective white ABS
• Size (L x W x H) 84 x 84 x 36mm
• Back panel has blanked-off wall mounting holes which can be drilled out if required
• Back panel is supplied undrilled, so the case can also be used as a small enclosure
• Mounting holes compatible with standard electrical pattresses
• Recessed area 70 x 70mm incorporated into the front cover for labels/logos
• Moulded in flame-retardant ABS to UL 94V-0
• Moulded-in bosses for mounting PCBs and other components
• Manufacturer's part IEC276W

This black ABS case from Evatron has a rectangular design and is vented on two sides, The lid can be screwed fit and offers easy access.

• Fixed together with two screws (supplied)
• Height: 94mm
• Width: 68mm
• Depth: 38mm
• Manufacturer's part PP106N

This white ABS case from Evatron has a rectangular design and is vented on two sides, The lid can be screwed fit and offers easy access.

• Fixed together with two screws (supplied)
• Height: 94mm
• Width: 68mm
• Depth: 38mm
• Manufacturer's part PP106W

This sensor case from Evatron Has ventilated sides, allowing free airflow for temperature, gas, humidity sensors and thermostats.

• Moulded in non-reflective ivory ABS, 2mm thick
• Size (L x W x H) 71 x 71 x 27mm
• Back panel has blanked-off wall mounting holes which can be drilled out if required
• Back panel is supplied undrilled, so the case can also be used as a small enclosure
• Recessed area 70 x 70mm incorporated into the front cover for labels/logos
• Moulded-in bosses for mounting PCBs and other components
• Manufacturer's part PP42M

This sensor case from Evatron Has ventilated sides, allowing free airflow for temperature, gas, humidity sensors and thermostats.

• Moulded in non-reflective black ABS, 2mm thick
• Size (L x W x H) 71 x 71 x 27mm
• Back panel has blanked-off wall mounting holes which can be drilled out if required
• Back panel is supplied undrilled, so the case can also be used as a small enclosure
• Recessed area 70 x 70mm incorporated into the front cover for labels/logos
• Moulded-in bosses for mounting PCBs and other components
• Manufacturer's part PP42N

An attractively styled ABS case with a slotted grille in one end and a pierced grille on the front.

• Ideally suited to sensors, intercoms, alarms, buzzers etc.
• Moulded-in bosses in both front and base sections for mounting PCBs, etc.
• Base section has two keyhole shaped knock-outs for wall mounting over screw heads if required
• Two halves of the case are secured by 4 self-tapping screws, supplied
• Overall dimensions: 125 x 62 x 50mm
• Colour: grey