11 piece 8mm cutter set for Draper 33893 250W variable speed metal working lathe

Face plate for Draper 33893 250W variable speed metal working lathe

Face plate clamp set for Draper 33893 250W variable speed metal working lathe

Steady rest for Draper 33893 250W variable speed metal working lathe.

Follow rest for Draper 33893 250W variable speed metal working lathe

MT2 13mm tailstock chuck for Draper 33893 250W variable speed metal working lathe

MT3 live centre for Draper 33893 250W variable speed metal working lathe

MT2 revolving centre for Draper 33893 250W variable speed metal working lathe

2 piece cutter set for Draper 33893 250W variable speed metal working lathe

Four jaw independent chuck for Draper 33893 250W variable speed metal working lathe

Rocker tool post for Draper 33893 250W variable speed metal working lathe

Carriage stop for Draper 33893 250W variable speed metal working lathe

Precision built metal working lathe capable of cutting metric gears. Variable speed reversible drive and powered cutting facility for right and left hand threads. No-volt switch to prevent accidental switch on with the chuck guard fitted as standard. Supplied with self-centring three jaw chuck and approved plug. Extensive range of accessories available. Carton packed.

• Diameter turning capacity 180mm
• Centre turning capacity 300mm
• Chuck capacity 80mm
• Low spindle speed 100-1100 r/min
• High spindle speed 100-2500r/min
• Cross slide travel 65mm
• Spindle bore 20mm
• Overall length 770mm
• Weight 42kg

Ideal for use on a workbench, this lathe has variable speeds allowing the user to carry out various woodturning operations. Fitted with a 200mm swing over bed, the lathe has a no - volt overload safety switch for safety. Heavy duty cast iron bed provides a vibration free operation. Supplied with 50mm and 150mm face plates, 175mm tool rest and 3/4" drive spur. Display packed.

• Diameter turning capacity 200mm
• Centre turning capacity 300mm
• Speeds-variable 750-3200r/pm
• Spindle thread size 3/4"
• Spindle taper MT1
• Weight 21kg

Digital woodturning machine with variable speed 550W motor. Digital display is fitted on to the headstock. The cast iron construction provides maximum rigidity and strength helping deliver a smoother, vibration free operation. Supplied with 80mm faceplate and 150mm tool rest. Display packed

• Diameter turning capacity 305mm
• Centre turning capacity 457mm
• Speeds-variable 650-3800r/pm
• Spindle thread size 3/4"
• Spindle taper MT1
• Weight 32kg

Woodturning machine with powerful variable speed 750W motor. Fitted with a digital speed display on a fully reversible and rotating headstock for large bowl turning. The cast iron construction provides maximum rigidity and strength helping deliver a smoother, vibration free operation. Supplied with 150mm faceplate, 300mm tool rest and 4 - prong drive centre. Display packed on pallet.

• Diameter turning capacity 360mm
• Centre turning capacity 1100mm
• Speeds-10 500-2000r/pm
• Spindle thread size 3/4"
• Spindle taper MT1
• Weight 92kg

Die holder with 10mm plain shaft for use with Proxxon lathes. The plain shaft fits the 10mm diameter holder mounted in the tailstock of either the PD 230/E or PD 400 lathes.

The holder can be held by hand while cutting the threads.

• For cutting male threads
• Supplied with six metric dies M3, M4. M5. M6, M8 and M10
• Supplied in a wooden box
• Manufacturer's part 24082

This step clamp set is supplied with the Proxxon KT 70 compound table, but can also be ordered separately.

Each set consists of 2 stepped blocks and clamps, T-slot nuts of the Micromot standard (11.5 x 11 x 4mm), plus bolts.

• Suitable for use with the Proxxon TBH124 and BFB2000
• Supplied in wooden box with sliding lid
• Manufacturer's part 24256

This Proxxon step clamp set consists of 2 step blocks and 2 clamps, 2 nuts and 2 T-slot nuts.

• Secures objects to approximately 35mm high
• Supplied in a wooden box
• Manufacturer's part 24257

Precision V-blocks from Proxxon designed to clamp various workpieces.

These clamps are made of hardened steel, precision ground in pairs. The solid clamp and knurled knob ensure superb securing of the workpiece.

• Supplied in a wooden box with lid
• May be used on its side and back
• Jaw width 60mm, clamping capacity 42mm
• Complete with securing bolts
• Four different depths of V, all at 90°
• Size 50 x 30 x 30mm
• Manufacturer's part 24262

The Proxxon Engineering Lathe System PD 400 is unequalled in its class and offers both precision and versatility.

It has a 3-jaw chuck, live centre and thread cutting capability. It is ideal for straight and cross cuts, taper turning, internal and external thread cutting, slotting, etc. and is usable on materials such as steel, non-ferrous metals (aluminium, brass etc.).

The sturdy frame with ground and hardened, ribbed construction makes for high precision and stability and produces negligible variances even under heavy loads.

A wide range of accessories complements the lathe's functions. The bed is equipped with a milled surface for securing mill/drill head PF 400.

• Supplied with change gears for thread cutting in 19 steps (0.2 - 3,0mm)
• Main switch with emergency stop function and restart protection.
• Quality, precision 3 jaw chuck with 100mm capacity.
• Powerful capacitor motor with 550W output.
• Quick-change tool post with 2 holders (fitted with adjustable height and stop).
• Includes 2MT rotating centre in tailstock
• Easy-to-use hand wheel of aluminium with adjustable scale of steel. 1 division = 0.05mm
• Fully enclosed leadscrew with Acme thread (12 x 1.5)
• Cross-braced cast iron bed with wide, ground slide ways
• Handwheel for quick support change
• Switch for clockwise, off and counter-clockwise rotation
• Selector for auto feed
• Manufacturer's part 24400

The Proxxon Splash Guard/Coolant Collector for PF400 is a chip collection tray for use with the Proxxon PD 400 lathe.

Made from 1.25mm steel plate, powder coated, this part is designed to make seepage of the coolant impossible. Slopes on the front and rear of the tray make it easy to clean.

• Welded cover protects the lathe motor
• Mounting holes pre-drilled
• Size: 800mm length x 270mm width x 290mm height
• Manufacturer's part 24402

Fixed Steady for use with the Proxxon PD 400 lathe when turning long, slender work.

This part can be fitted directly to the bed and used when the tailstock support is inadequate.

• Maximum diameter 50mm
• Manufacturer's part 24404

Travelling Steady which can be fitted to the carriage of the Proxxon PD 400 lathe.

Indispensable when turning long, slender pieces.

• Maximum diameter 50mm
• Manufacturer's part 24406

The Proxxon 4-Jaw Independent Chuck PD400 is designed for use with the Proxxon PD 400 lathe, and can be used to mount irregularly and asymmetrically shaped objects.

Each jaw is adjusted individually and so centring is achieved manually.

• Hardened reversible jaws
• Chuck diameter 100mm
• Manufacturer's part 24410

The Proxxon Face Plate and Clamp Downs PD 400 150mm is an accessory for the Proxxon PD 400 lathe system that can be used in the place of the standard chuck for larger and asymmetrical workpieces.

It has a diameter of 130mm, with two through T-slots, as well as mounting clamps.

• Manufacturer's part 24412

Centre turning accessory for use with the Proxxon PD 400 lathe, this product is ideal when turning with the highest possible accuracy.

Supplied with 2 dead centres (2MT and 3MT), a drive/faceplate with 30mm bore and 3 clamp screws, as well as reducing bushes 30/20mm and 30/15mm. A threaded drive pin rides in the slot.

• Manufacturer's part 24414

Individual quick-change holder which fits the tool post of the Proxxon PD 400 lathe system.

Proxxon parting tool holder and tool for use with the PD 400 quick-change system.

• Used to part stock and cut slots
• Supplied with 12 x 3 x 85mm HSS cobalt parting tool
• Manufacturer's part 24417

The Proxxon Collet Chuck and Collets are set for for accurate use on round components with the Proxxon PD400 lathe. The set includes one each of collet sizes 2.0, 3.0, 4.0, 5.0, 6.0, 8.0, 10 and 12mm, as well as one soft collet for making your own customised size.

These collets give concentric accuracy better than 0.2mm, much better than a chuck. The included collet attachment is mounted in the place of the headstock chuck.

• Centre distance 400mm, centre height 85mm
• Swing over top slide 116mm
• Solid, ribbed bed made of quality cast iron with ground and hardened slideways
• Oversized spindle with two adjustable taper bearings, 3MT taper and 20.5mm bore
• Run-out, without chuck, 0.005mm
• The precision 3 jaw chuck has a capacity of up to 100mm
• Six spindle speeds are provided via belt drive: Level 1: 80 / 330 / 1400rpm; Level 2: 160 / 660 / 2800rpm
• Powerful, quiet 550W motor
• All adjusting wheels fitted with scales that can be zeroed. 1 division = 0.05mm
• Auto feed speed 0.07 or 0.14mm/rev.
• Integrated gearbox provides 19 pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 - 1.0 - 1.25 - 1.50 - 1.75 - 2.0 - 2.5 - 3.0mm
• Imperial threads of 10 - 48 TPI are also possible
• A rotating centre 2MT and 10mm 2MT gear chuck are included
• Cross slide travel 85mm and topslide 55mm
• Swivels through 45° for taper turning
• Tailstock with 2MT (short), spindle travel 40mm and a diameter of 24mm
• Supplied with scale
• Approx. size 900 x 400 x 300mm
• Uses 10 x 10mm cutters
• Weight approx. 45kg

This six-piece set of cutting tools for use with the Proxxon PD 230/E and PD 400 lathe systems is supplied in a wooden box.

Each set comprises one of each cutter for 60° (metric threads) and 55° (Whitworth threads), for cutting internal threads, 1.3mm, 2.65mm and 4mm boring bars and a tool holder. These cutters are held in a tool holder that mounts to the tool post of either the PD 230/E or PD 400.

• Shank diameter is 6mm, length 95mm
• Manufacturer's part 24520

Five-piece tool set for use with the Proxxon PD 400 lathe systems. The set includes 10mm tools for roughing out, parting, finishing cut, left and right cutter, supplied in a wooden box.

• Manufacturer's part 24550

Proxxon pre-ground parting tool bit made of quality Cobalt HSS, designed for use with lathe systems.

• Measures 12 x 3 x 85mm
• Manufacturer's part 24554

This 3-piece tooling set includes holders for roughing, for boring in holes of 12mm or more and for longitudinal turning (10 x 10 x 70mm) to use with the Proxxon PD 400 lathe system. Three tungsten inserts of 55° are included, as well as a fixing screw and TX 8 spanner.

• Disposable tungsten carbide tips
• Supplied in a wooden box and lid
• Manufacturer's part 24556

Standard 55° tungsten carbide tips for use with Proxxon tooling holders, supplied in a pack of 10.

• Manufacturer's part 24557

Set of 4 milling cutters, designed for use with the Proxxon PD 230/E and PD 400 lathe systems.

Consists of cutters of 2, 3, 4, and 5mm diameter.

• All with 6mm shank
• Double fluted, to DIN327 HSS
• Supplied in wooden box
• Manufacturer's part 24610

Set of 4 milling cutters, designed for use with the Proxxon PD 230/E and PD 400 lathe systems.

Consists of cutters of 6, 7, 8 and 10mm diameter.

• 6mm cutter has 6mm shank
• 7mm, 8mm and 10mm cutters have 10mm shank
• HSS four flute, DIN844
• Supplied in wooden box
• Manufacturer's part 24620

Complete HSS centre drill set, designed for use with Proxxon PD 230/E and PD 400 lathe systems.

Includes 3 drills, sizes 2.0, 2.5 and 3.15mm.

• DIN 333 (type A) 60°
• Manufacturer's part 24630

One of a comprehensive range of high quality accessories for SM27 metalworking lathe.

M10 Tapping chuck for Model No’s MAG60110VHD and MAG60230VHD Heavy-Duty Magnetic Drilling Machines.

• M10 Tapping chuck for Model No’s MAG60110VHD and MAG60230VHD Heavy-Duty Magnetic Drilling Machines.
• Model No. MDTCM10

M14 Tapping chuck for Model No’s MAG60110VHD and MAG60230VHD Heavy-Duty Magnetic Drilling Machines.

• M14 Tapping chuck for Model No’s MAG60110VHD and MAG60230VHD Heavy-Duty Magnetic Drilling Machines.
• Model No. MDTCM14

M18 Tapping chuck for Model No’s MAG60110VHD and MAG60230VHD Heavy-Duty Magnetic Drilling Machines.

• M18 Tapping chuck for Model No’s MAG60110VHD and MAG60230VHD Heavy-Duty Magnetic Drilling Machines.
• Model No. MDTCM18

M8 Tapping chuck for Model No’s MAG60110VHD and MAG60230VHD Heavy-Duty Magnetic Drilling Machines.

• M8 Tapping chuck for Model No’s MAG60110VHD and MAG60230VHD Heavy-Duty Magnetic Drilling Machines.
• Model No. MDTCM8

Powered by smooth operating 550W induction motor. Plate clutch allows seamless speed control without the need to stop the motor and adjust belts and pulleys. Hollow centred head and tail stocks allow hole boring. One-piece machined lathe bed with head stock extension for bowl turning and sanding operations. Head stock rotates through five preset positions for outboard bowl turning. Includes floor stand and fitted with a 3-pin plug and cable.

Powered by 370W motor with no-volt load release switch which prevents restart after the mains power has been interrupted. Solid head and tail stocks. Lathe bed with twin bar construction. Four turning speed options to suit a variety of jobs. Fitted with a non-rewirable 3-pin plug and cable.

Bench mounting multifunction mini drill, mill and lathe with variable speed giving flexibility to handle most materials. Features two 150W motors, one to operate the drill/mill and the other to power the lathe. The lathe cutting feed can be power driven or advanced manually. Thread cutting may also be undertaken with the optional thread cutting kit. Supplied with Metric graduated scales and all necessary tools required for setting and adjusting. An optional stand is also available (89-2814).

Bench mounting miniature lathe, small enough to fit into the corner of a workshop and light enough to be truly portable. Construction is predominately cast iron and steel. Fitted with 150W high torque motor. The capacities are 150mm swing over bed and 250mm between centres. Features variable speed control, manual or powered lead screw feed and over-load protection. Supplied with Ø80mm 3-jaw self centring chuck, tailstock centre and service tools. Option to upgrade with a mill/drill head - see 84-0748

Transforms Model No. SM2503A Metalworking Mini Lathe into a lathe/mill drill combination. Easily retrofitted, this drill head offers the flexibility to handle most materials. This space efficient, versatile lathe mill/drill machine features a 150W motor.

One of a comprehensive range of high quality accessories for Model No. SM2503 mini lathe/drilling machine.

One of a comprehensive range of high quality accessories for Model No. SM2503 Mini Lathe/Drilling Machine.