The Draper Air Nibbler Punch for 27639 is a quality diecast construction. Punch head has four way entry for forward, right, left and reverse operation. Carton packed.

• Cutting capacity: 18 gauge in steel
• Strokes per minute: 2100
• Operating air pressure: 90psi (6.2bar)
• Average air consumption: 4.0cfm (114L/min)
• Minimum hose size: 3/8" I.D
• Air inlet: 1/4" BSP
• Weight:1kg

The Draper Air Nibbler Die for 27639 is a quality diecast construction. Punch head has four way entry for forward, right, left and reverse operation. Carton packed.

Specification:
• Cutting capacity: 18 gauge in steel
• Strokes per minute: 2100
• Operating air pressure: 90psi (6.2bar)
• Average air consumption: 4.0cfm (114L/min)
• Minimum hose size: 3/8" I.D
• Air inlet: 1/4" BSP
• Weight: 1.0kg

This air nibbler is manufactured from lightweight aluminium, designed to reduce heat and user fatigue. It will cut through up to 1.5mm sheet steel with minimal distortion, leaving edges smooth and burn free. For added user comfort there is a soft grip handle. The tool is supplied with an adjustable die and a 1/4" BSP connector.

• Working pressure 90psi (6.2bar)
• Average air consumption 9.8cfm (278l/min)
• Air inlet 1/4"
• Air hose size 3/8"
• Strokes per min 3800
• Length 195mm
• Weight 0.83 kgs

Air shears for distortion and burr - free cuts on a range of materials including alu Minium, tin, 1.2mm steel and most plastics. Manufactured from lightweight Aluminium housing attached to an ergonomic soft grip handle, which provides comfort even when used for prolonged periods. Attached with a 1/4" BSP airline connector which connects with the 360° rotating air inlet, helping prevent air - lines from kinking when in use. The ergonomic design and lightweight housing assist in prevention of the cold - sink effect.

• Cutting capacity (mild steel) 18 Gauge (1.2mm)
• Strokes per minute 3,200spm
• Operating air pressure 90psi (6.3bar)
• Average air consumption 5.5cfm(1,132L/min)
• Vibration level 4.3m/s2
• Min. hose size 3/8" (10mm)
• Air inlet 1/4" BSP
• Weight 1.28kg

Well balanced robust construction with fingertip operated throttle control. Suitable for cutting intricate shapes in steel up to 1.5mm thick. Punch and die may be rotated through 360° to aid access and obtain maximum consumable life.

Consumable parts for Model No. SA28.V2 air nibbler. One punch and a die.

Suitable for cutting straight lines in sheet metal. Palm throttle control and alloy head and housing. Blades are consumable items and are not covered by guarantee.

Pistol grip design for increased control and manoeuvrability. Finger tipped control and polished aluminium housing with alloy head. Suitable for cutting straight lines in steel metal sheet up to 1.2mm thickness.

Composite cover moulded around lightweight aluminium alloy housing reduces effects of chill on operator’s hands and provides added control. Air motor with quality bearings for smooth and powerful operation. Exhaust outlet adjusts 360°, keeping airflow away from operator. Suitable for cutting intricate shapes in steel up to 1.5mm thick. Punch and die may be rotated through 360° to aid access and obtain maximum consumable life.

Punch for Premier air nibbler, Model No. SA649.

Die for Premier air nibbler, Model No. SA649.