This 18V cordless compact bandsaw from DeWalt is ideally suited for cutting lengths of metal, including threaded rod, unistrut and steel pipework. It creates little or no sparks when cutting metal and provides smooth cuts, leaving surfaces burr-free. The bandsaw is well balanced and easy to handle in all orientations including overhead, while the large 63mm cut capacity cuts up to DN 50 or 2in SCH 40 pipe. Supplied with a 14/18 TPI variable pitch bi-metal blade and a hang hook.Bandsaw values:Sound pressure: 80dB(A)Sound pressure uncertainty: 3dB(A)Sound power: 91dB(A)Sound power uncertainty: 3dB(A)Hand/arm vibration metal: 2.5m/s² Uncertainty K 1 (vibration): 1.5m/s²

• No load speed: 174m/min
• Max cutting capacity: 63mm
• Size: 280 x 385mm (H x L)
• Weight: 3.9kg
• Manufacturer's part DCS371N-XJ

Supplied with a 5mm wide 6tpi blade, parallel rip fence, open ended spanner, flat head screwdriver, push stick and 2 x hex keys. Each machine is fitted with a table tilting feature with 0 - 45° capacity allowing angled cutting, ripping, mitre and bevel cutting. Fitted with a cable and approved plug. Display carton.

• Motor input 250W
• Motor type Induction
• Table size 290 x 290mm
• Max cutting height 80mm
• Blade speed 900M/min
• Max width of cut 200mm
• Blade length 1400mm
• Table bevel angle 0-45 deg
• Table height from floor 300mm
• Dust extraction port 35mm
• Weight 17.5kg

Designed for workshop use a bandsaw with excellent performance and cutting capacity. Attached with a fine ground table that tilts between 0 - 45°. Fitted with LED flexi - light, micro switches, dust collection tray, quick release blade tensioner and blade bearing guides.Can be bench mounted or fitted to a stand (available separately). Supplied with mitre gauge, rip fence and dust extraction outlet and fitted with a cable and approved plug. Display packed.

• Motor input 750W
• Motor type Induction
• Table size 390 x 480mm
• Max cutting height 165mm
• Blade speed 370/800M/min
• Max width of cut 305mm
• Blade length 2240mm
• Table bevel angle 0-45 deg
• Dimensions (carton) 1230mm x 530mm x 435mm
• Table height from floor 944mm (with stand)
• Dust extraction port 50, 75 and 100mm
• Weight 57Kg

Designed for workshop use, a bandsaw with excellent performance and cutting capacity. Capable of straight and cross cutting, ripping, mitre and the 0 - 45° tilting table enables bevel cutting. Fitted with an LED lamp, mitre guide, rip fence and a finely ground cast steel table. Supplied with 1/2 inch 4TPI blade, a push stick, open ended 8 x 10mm spanner and 3, 4, 5 and 6mm hex keys. Can be bench mounted or fitted to a stand (Stock No: 84719, available separately). Fitted with a dust extraction outlet and cable with approved plug.

• Motor input 1100w
• Motor type Induction
• Table size 545 x 515mm
• Max cutting height 225mm
• Blade speed 370/800M/min
• Max width of cut 350mm
• Blade length 2560mm
• Table bevel angle 0-45 deg
• Table height from floor 944mm (with stand)
• Dust extraction port 50, 75 and 100mm
• Weight 73Kg

The Metabo BAS 318 Precision WNB Bandsaw offers high precision and stability for highest cutting quality. Fitted with a quiet induction motor that is robust and maintenance-free. Restart protection prevents unintentional start-up after power supply interruption. Offers tool-less height adjustment of the saw blade guard and an extendable table width extension for processing large workpieces.

It has a quiet belt path thanks to balanced flywheels with rubber coating. Fitted with top and bottom HSS precision three-roller guide for accurate cutting results, adjustable without tools Two cutting speeds for various applications and materials. There is also a precise parallel guide with double clamping and quick fastening.

Easy inclination adjustment of the grey cast iron saw table for precise incline cuts thanks to toothed ring guide. Quick-action clamping lever and door opening without tools, for easy saw blade change. Has a blade clamp indicator with scale for easy control of the blade tension.

There is also an LED work light for illumination of the cutting line and a drawer for simple disposal of collected sawdust. External extraction is also possible for a low-dust working environment.

Supplied with: 1 x A6 Universal Bandsaw Blade, 1 x Dust Collection Container, 1 x Push Stick, 1 x Stand, 1 x Parallel Guide / Rip Fence, 1 x Mitre Fence and 1 x Suction adaptor (for Ø 44, 58, 100mm).

The Record Power BS250 Benchtop Bandsaw has a strong steel frame, dynamically balanced bandwheel, cast iron table and an induction motor. The table tilts from 0-45º on a solid trunnion with easy to read scale. Fitted with a strong fence that has a cam action lock for ease of use and simple tension adjustment for clamping strength (clamps at rear of table). Its blade guides are simple to set and easily adjustable.

The BS250 has a solid, finely ground cast iron table top provides an ideal, low friction work support. With a strong tension system that requires more than adequate tension for blade capacities of this model and 'sealed for life bearings' that require no maintenance during the working life of your machine.

A compact machine designed to offer those with limited space or budgets a real bandsaw with sensible capacity and performance, as an alternative to lightweight hobby machines. The machine can be bench mounted or fitted to the optional stand and wheel kit (NOT SUPPLIED) providing great flexibility in a tight space.

Includes 1 General Purpose blade

The Record Power BS250/AW Stand & Wheel Kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis.

Simply depress the foot pedal and the machine is lifted onto castors for easy movement, press the foot pedal again to lower the bandsaw onto its legs again.

Steel chassis with locking blade wheel covers. Smooth operation by bearing mounted blade wheels and belt drive induction motors. Micro switches prevent operation when either blade wheel cover is open. No-volt release switches prevent uncontrolled blade re-start after power interruption. Suitable for cutting wood and plastics. Fitted with tilting tables for cutting compound mitres. Fully adjustable blade tracking and tensioning for precise cutting action. Features quick adjusting rip fence, mitre gauge, dust extraction port, blade wheel brushes and push sticks.

Fully approved to current CE directives. Steel chassis with locking blade wheel covers. Smooth operation by bearing mounted blade wheels and belt drive induction motors. Micro switches prevent operation when either blade wheel cover is open. No-volt release switches prevent uncontrolled blade re-start after power interruption. Two speed operation enables bandsaw to cut multiple types of materials. Fitted with tilting tables for cutting compound mitres. Fully adjustable blade tracking and tensioning for precise cutting action. Features quick adjusting rip fence, mitre gauge, dust extraction port, blade wheel brushes and push sticks. Supplied with metal stand.

Fully approved to current CE directives. Steel chassis with locking blade wheel covers. Smooth operation by bearing mounted blade wheels and belt drive induction motors. Micro switches prevent operation when either blade wheel cover is open. No-volt release switches prevent uncontrolled blade re-start after power interruption. Two speed operation enables bandsaw to cut multiple types of materials. Fitted with tilting tables for cutting compound mitres. Fully adjustable blade tracking and tensioning for precise cutting action. Supplied with quick adjusting rip fence, mitre gauge, dust extraction port, blade wheel brushes and push sticks. Supplied with metal stand.

Fully approved to current CE directives. Steel chassis with locking blade wheel covers. Smooth operation by bearing mounted blade wheels and belt drive induction motors. Micro switches prevent operation when either blade wheel cover is open. No-volt release switches prevent uncontrolled blade re-start after power interruption. Two speed operation enables bandsaw to cut multiple types of materials. Fitted with tilting tables for cutting compound mitres. Fully adjustable blade tracking and tensioning for precise cutting action. Features quick adjusting rip fence, mitre gauge, dust extraction port, blade wheel brushes and push sticks. Supplied with metal stand.

Manufactured to comply with Supply of Machinery (Safety) Directives 1992 (and amendments) and fully CE approved. Saw arms are fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Coolant fluid system and main power controls are switched on 24V/230V combined circuits for extra safety (SM353CE only). Heavy-duty single phase electric motors with over-current sensor on SM353CE model to cut power in the event of blade jam.

• Large cutting capacity.
• Ideal for Industrial and Agricultural engineering applications.
• Precision machined cast iron saw bed.
• Hydraulic feed saw arm gives greater cutting control allowing clean results.
• 24V system for coolant pump and motor controls gives added safety to operator.
• Over-current sensor on motor cuts power in the event of blade jam.
• All blade and pulley covers protected by safety switches.
• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.
• Model No. SM353CE

Saw arms are fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Bow swivels up to 60° angle allowing workpiece to always sit in a central position. Coolant fluid system and main power controls are switched on individual 24V/230V circuits for extra safety. Features auto and manual shut-off switches. Heavy-duty single phase electric motor.

Saw arms are fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Bow rotates up to 60° angle allowing workpiece to always sit in a central position. Coolant fluid system and main power controls are switched on individual 24V/230V circuits for extra safety. Features auto and manual shut-off switches giving the user options of control when in use. Heavy-duty single phase electric motor.

Saw arm is fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Coolant fluid system and main power controls are switched on individual circuits. Heavy-duty single phase electric motor.

• Specifications:

Model No	SM35CE
Nett Weight:	138kg
Capacity 90° - Round:	Ø180mm
Capacity 90° - Square/Rectangular (H x W):	180 x 300mm
Capacity 45° - Round:	Ø100mm
Capacity 45° - Square/Rectangular (H x W):	110 x 170mm
Blade Size:	2360 x 19 x 0.9mm
Blade Speeds:	34, 41, 59, 98m/min
Motor Power:	750W
Supply:	230V
Weight:	138kg

Heavy-duty cast base and horizontal/vertical cutting arm. Saw base features integral mitring vice with scale of 45° to 90° for angle cutting and fully adjustable precision blade guides for accurate cutting and longer blade life. Stand is fitted with two wheels.

Features swivel arm facility to aid angle cutting of long pieces of stock in confined workshop. Supplied with quick action vice - push the jaw up to the workpiece and then pull the cam action lever to lock. Fully adjustable precision blade guides for accurate cutting and longer blade life. Supplied with anti-vibration feet and workshop stand.