Useful tool for greasing garden machinery, recreational and automotive vehicles. Display packed.

Self-priming vertical lift pump for use with a variety of liquids including thinners, acetone, anti-freeze, detergents, glycerine, weedkiller, water and mild acids. Plunger rod is stainless steel with PTFE seals. Delivers approximately 400ml of liquid per full stroke. Supplied complete with polypropylene bung adaptor for use with 55-205L drums. Polythene bag with label.

Lever action gun for use with standard grease gun cartridges and bulk. Supplied complete with delivery tube, connector with 1/8" BSPT thread and pressure relief valve. Safe working pressure 55MPa (8000psi). Display carton.

For use with steel barrels capacity 100 to 205L maximum. Aluminium diecast head and bung nut with zinc plated curved discharge spout 38mm diameter and lever handle. The telescopic suction tube (supplied) attaches to base of pump to reach bottom of barrel. Display carton.

For bulk loading with stiff, medium or heavy grease for agricultural, automotive or industrial applications. Heavy duty spring, plunger assembly and air release valve. Complete with delivery tube and hydraulic connector. Side lever action. Suitable for cartridge, suction and bulk loading. Safe working pressure 62Mpa (9000 psi). Threaded 1/8" BSPT. Display carton.

Zinc plated body with spring primed piston and air release valve complete with delivery tube and hydraulic connector. Safe working pressure 24MPa (4350 psi). Threaded 1/8" BSPT. Display carton.

For use on vehicles and machinery such as gearboxes, axles, etc. Supplied complete with flexible delivery tube 10mm bore. Display carton.

Diecast head with port for air bleeder/bulk loader for single handed operation. Coupler and rigid extension tube. Suitable for cartridge or bulk fill. Safe working pressure 34MPa (5000 psi). Display carton.

Heavy duty spring and plunger assembly, complete with delivery tube and hydraulic connector. Side lever action. Suitable for grease cartridge loading. Safe working pressure 40MPa (6000 psi). Threaded 1/8" BSPT. Display carton.

Expert Quality, designed to be tapped with a hammer, which forces either paraffin or a light viscosity oil through the tool into the grease nipple, enabling the penetration of the clogged grease fitting. Manufactured from heavy-duty steel with a built-in hand guard and a flexible hose attachment for reaching fittings in difficult areas. Can be used with the flexible connection attached or straight onto a grease nipple. Supplied with two spare plunger seals.

Expert Quality, lever action grease gun intended for use with small threaded 500gram and 600gram screw-on type grease cartridges. Precision machined from high strength, die-cast aluminium, which achieves a longer service life, whilst developing 7,500psi/517BAR output pressure at an impressive 0.8gr per stroke. Fitted with a conical rubber thread insert ensuring an airtight grease cartridge fit and a professional 4-jaw connector with ball check system. Supplied with 300mm flexible grease delivery tube.

Expert Quality, portable hand-operated grease pump providing high pressure greasing where power is not available. Ideal for site use in construction, agricultural and remote locations. Grease is delivered at 1.2g per stroke at 24MPa (3500psi). Pump head manufactured from cast aluminium with solid steel pumping chamber. Lifting handle on pump for easy transport around site. Supplied complete with drum cover, 1.2m of flexible hose fitted with four jaw coupler. Suitable for use with NLGI 2 grease and UK 12.5kg grease pails. Carton packed.

Expert Quality, portable hand-operated lever grease pump providing high volume greasing where power is not available. Ideal for site use in construction, agricultural and remote locations. High grease output, four times more efficient per stroke (4g) at 27MPa (4000psi). Heavy duty cast iron pump head with lifting handle on pump for easy transport around site. Supplied complete with drum cover, 2M of 1/4" I.D. high pressure rubber hose fitted with high quality steel connector and grease coupler, and 10kg capacity steel grease bucket. Suitable for use with grease up to NLGI 3. Carton packed.

Expert Quality, with diecast head and port for air bleeder/bulk loader for single handed operation. Supplied complete with coupler and 230mm high pressure hose to DIN1283. Suitable for cartridge or bulk fill. Safe working pressure 40MPa (5800 psi). Display carton.

The Faithfull DIY Manual Squeeze Siphon Pump is designed to safely dispense liquids from containers ranging from 5L up to 205L drums. It is made from a non-corrosive PE material.

It is recommended for use with: kerosene, diesel, gasoline, water (not safe to drink), light oils, chemical insecticides, soaps, detergents, mild acids and antifreeze.

Specification:

Total Length: 530mmSuction Tube Length: 385mm

The Faithfull Heavy-Duty Piston Siphon Pump is designed to safely dispense liquids from containers ranging from 5L up to 205L drums. It is made from a non-corrosive PE material.

Recommended for use with: kerosene, diesel, gasoline, water (not safe to drink), light oils, chemical insecticides, soaps, detergents, mild acids, antifreeze and liquid waxes.

Specification:

Total Length: 1150mmSuction Tube Length: 850mmDischarge Tube Length: 1200mm approx. Delivery Volume: 20LPM approx.

The Faithfull Cast Iron Rotary Pump is an economical and simple solution for the manual dispensing of diesel and oil, primarily from a drum, but also from other types of storage tanks.

Complete with a 2in bung adaptor for a secure hold and a built-in strainer to filter out any contaminants. Robust cast iron construction and a telescopic suction tube, that when extended can reach a maximum length of 1m.

Due to the cast iron construction this pump is not suitable for handling liquids with a flash point below 55°C.

Specification:

Pipe Length: 1000mmMax. Capacity: 205 litresMax. Flow Rate: 310ml per revolutionMax. Viscosity: 410cStOils up to: SAE140Temperature Range: -10°C to +55°C

The Faithfull Barrel Pump is a lightweight and corrosion resistant pump. Pump body is manufactured from glass filled polypropylene with Ryton veins with pump hardware of Stainless Steel. An internal strainer is fitted at the suction tube inlet to filter out contaminants.

The pump is supplied complete with threaded polypropylene 3 piece (45in long) suction tube and a choice of two bung adaptors to fit both plastic and metal drums with a capacity of 15 - 55 gallons. The pump may be used to dispense petroleum products, water and water-based chemicals, anti freeze, wind screen washer fluid, mild acids and alkali solutions.

• Heavy & Light Oils
• Heating Oils
• Motor Oils
• Kerosene
• Diesel
• Anti Freeze
• Windscreen Washer Fluid
• Mild Acids
• Alkali Solutions

The Faithfull Plastic Rotary Pump is an economical and simple solution for the manual dispensing of light viscosity oils and antifreeze from drums or storage tanks.

Complete with a 2in bung adaptor for a secure hold and a built-in strainer fitted at the suction tube head to filter out any contaminants. A telescopic suction tube extends to a maximum length of 1m. Not for use with acid, chemicals or solvents.

Specification:

Pipe Length: 1000mm

The Faithfull Side Lever Grease Gun develops up to 6,000 psi/413 bar of pressure. It is both cartridge compatible as well as being able to be bulk loaded. It features a die-cast head with easy locking plunger, an ergonomic pump handle and an air release valve. This combines to make it a very flexible and efficient product.

Specification

Capacity: Cartridge: 400g, Bulk: 500g

The Faithfull FAIOCP50205L has an efficient lever action pump for use with steel barrels. This heavy-duty pump features a diecast aluminium head and bung nut, with a zinc plated 38mm curved discharge spout and telescopic suction tube that adjusts to suit the barrel size.

The Faithfull FAIOCP50205L is for use with petroleum based liquids only with the following specifications: Delivers: 300ml (10 fl oz) per stroke. Fits: 50 to 205 Litre (15 - 55 gal) drums.

The Faithfull Mini Pistol Grease Gun develops up to 3,500psi/240bar with two optional nozzle locations, this compact pistol style appliance is ideal for access to grease nipples in confined spaces and is suitable for both professional and DIY use. A useful feature is the dual choice alternative of filling by suction or with a 3oz cartridge.

Grease gun holder this simple snap action clamp can be used for safe storage of both grease and suction guns. Manufactured from heavy gauge sheet steel with a rustproof zinc finish. The flat bottom bracket allows for mounting on to almost any surface.

Suitable for use on guns with a barrel diameter of 57mm (2.1/4in).

The Faithfull heavy-duty side lever grease gun develops up to 10,000 psi - 690 bar of pressure. The gun features an aluminium diecast head with an easy locking plunger system and ergonomic pump handle grip. The positive grip plunger handle, and the bulk loader system with an air release valve, combine to make this grease gun very efficient and easy to use.

A variable lever stroke feature is built-in for use in confined areas and the four jaw hydraulic coupler ensures that the grease goes exactly where it is needed at the press of the lever. With a 500g (16oz) capacity, the gun can be bulk filled by its suction action but will also accept 400g grease cartridges.

The Lumatic 1066/S Heavy-Duty Side Lever Grease Gun comes complete with air release valve/European pattern bulk filler nipple, filler point, 6 inch rigid tube and four jaw hydraulic connector.

International cartridge loading, accepts 400cc cartridge.

Made in Germany.

The Lumatic Lube-Shuttle® Side Lever Grease Gun for use with Lube-Shuttle 400g cartridges. Features a high quality zinc plated steel barrel body and an ergonomic hand grip. It is environmentally friendly with tool free cartridge opening via a screwcap, making the cartridge reusable. The design provides optimum use of all grease in the cartridge with fast, clean loading and unloading without opening the gun.

Comes with RH-30C single wire hose and precision hydraulic connector, thread 1/8in.

TÜV & DLG Approved.

Working Pressure: 400 Bar/5,800 psi.Maximum Pressure Capability: 800 Bar/11,600 psi.

The Lumatic Lube-Shuttle® One Handed Grease Gun has a zinc plated steel barrel for Lube-Shuttle® system cartridges, with an ergonomically designed pistol grip.

It is environmentally friendly with tool free cartridge opening via a screwcap, making the cartridge reusable. The design provides optimum use of all grease in the cartridge with fast, clean loading and unloading without opening the gun.

Comes with RH-30C single wire hose and precision hydraulic connector, thread 1/8in.

TÜV & DLG Approved.Maximum Pressure Capability: 300 Bar/4,350 psi.

Cast iron rotary pump to suit a 205 Litre drum. Suitable for diesel, motor, gearbox and hydraulic oils.

The Lumatic Industrial One Handed Grease Gun has a cast head design with a air release valve/European pattern bulk filler nipple. It is suitable for use with a standard 400g cartridge (also 500g bulk fill), and it is particularly suitable for use with silicon grease.

Comes with a 228mm (9in) single wire hose and precision connector.

A lightweight lever type mini pistol grease gun with a delivery tube which can be rotated through 360° and is designed to be used one handed.

Complete with air release valve, rigid tube and hydraulic connector for bulk filling.

Develops 500 Bar of pressure.

A telescopic type metal bodied hand grease gun with a push on connector.

Capacity: 120cc.

The Lumatic BSLGH Standard Side Lever Grease Gun, complete with air release valve/European pattern bulk filler nipple, 6 inch rigid tube and hydraulic connector.

International cartridge loading, accepts a 400cc cartridge.

Made in Germany.

Telescopic type metal bodied hand grease gun with push on connector.

Capacity: 60cc.

Metal bodied, telescopic type hand grease gun with universal connector.

Capacity: 125cc.

The Lumatic Industrial Air Operated Continuous Flow Grease Gun has a unique 360° swivelling head providing ease of use. It has been designed for standard 400g grease cartridges (or 500g bulk fill).

Comes with rigid tube, precision connector and UK standard air coupling.

Pressure Ratio: 40:1.Recommended Air Pressure: 4-10 bar.

The Lumatic VSLGH Contractors Side Lever Grease Gun is suitable for 400cc cartridge loading or 500cc bulk. Complete with air release valve/European pattern bulk filler nipple, 6 inch rigid tube and 4 jaw hydraulic connector.

Capacity: 400cc.

A push-type grease gun with a 150ml capacity. The gun has a robust galvanised steel housing.

• Pointed and hollow/universal coupler for hydraulic and ball type grease nipples
• Pressure 60 to 80 bar
• Ø42 x 210mm long

This manually operated grease gun has a loose grease capacity of 500ml or can be used with a 400g cartridge, using greases up to NLGI Class 2. The gun has a flexible push rod that enables the possible use of damaged or incorrectly fitting cartridges. A slip resistant handle and knurled body gives safe and secure handling and the gun will apply a variable lubrication pressure, dependent on handle operating presssure. The 300mm high pressure hose makes lubrication possible in difficult to reach areas.

• Tight 6µ fitting pump piston requires no dummy lubrication
• Separate filling and ventilation valves on head
• Performance unchanged after 40,000 actuating cycles
• Lockable push rod
• High-speed ventilation by half-turn of tube
• Max. delivery rate per stroke 1.4cm³
• High pressure reinforced hose 11 x 300mm
• Filling nipple M10 x 1
• Output connection M10 x 1
• Dimensions 390 x 120 x 66mm
• TÜV Certified

A 500ml capacity single-action suction and push-type gun that is suitable for oils up to SAE 90, petroleum, fuel oil and diesel. The gun has a steel body coated with plastic and a transparent flexible hose.

• Hose length 350mm
• Tubing OD 56mm
• Stroke 275mm
• Colour blue

Die-cast pump head with air-bleed valve. Three-way fill with cartridge, bulk or manual capability. Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. Contoured pump handle. Accepts standard 400g cartridges.

Highly durable cast iron pump head, features dual piston design for high volume performance. Three-way fill with cartridge, bulk or manual capability. Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. Rubber gripped grease tube and handle for easy grip. Features variable stroke for controlled grease volume. Half stroke gives low pressure and low volume, full stroke provides high pressure and high volume delivery. Accepts standard 400g cartridges.

Robust, double arm grease gun with aluminium die-cast head. For use with screw type grease cartridges, using vacuum suction to ensure full utilization of grease cartridge, as well as eliminating priming issues associated with conventional grease guns. Features a protective cap for hose storage preventing contamination. 1/8"BSPT Thread and supplied with adaptor to fit most screw type cartridges on the market. Use with Model No's SCS107 & SCS108. Zinc plated lever handles and rubber ergonomic grips. Fitted with minimal wearing parts to ensure prolonged life and supplied with 300mm (12") delivery hose and 4-jaw coupler.

• Robust, double arm grease gun with aluminium die-cast head.
• For use with screw type grease cartridges, using vacuum suction to ensure full utilization of grease cartridge, as well as eliminating priming issues associated with conventional grease guns.
• Features a protective cap for hose storage preventing contamination.
• 1/8"BSPT Thread and supplied with adaptor to fit most screw type cartridges on the market.
• Use with Model No. SCS107 400g Screw Type Grease Cartridge.
• Zinc plated lever handles and rubber ergonomic grips.
• Fitted with minimal wearing parts to ensure prolonged life and supplied with 300mm(12") delivery hose and 4-jaw coupler.
• Model No. AK4403

Highly durable die-cast aluminium alloy pump head with air-bleed valve. Fitted with an innovative quick release mechanism to speed up the re-fill process. Features 3-way fill with cartridge, bulk and manual capability. Supplied with a rigid delivery tube, push-on hydraulic 4-jaw coupling and contoured rubber pump handle. Accepts standard 400g cartridges.

• Die-cast aluminium pump head.
• Air-bleed valve.
• Innovative quick release mechanism.
• 3-Way fill with cartridge, bulk and manual capability.
• Supplied with a rigid delivery tube, push-on hydraulic 4-jaw coupling.
• Contoured rubber pump handle. Accepts standard 400g cartridges.
• Model No. AK4404

Mini push action hand greaser. Ideal for limited access areas or where smaller amounts of grease are required. Supplied with rigid extension tube and delivery nozzle.

Die-cast pump head. Three-way fill with cartridge, bulk or manual capability. Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. Contoured pump handle. Accepts standard 400g cartridges.

Three-way fill with cartridge, bulk or manual capability. Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. Contoured pump handle. Accepts standard 400g cartridges.

Die-cast pump head with air-bleed valve. Three-way fill with cartridge, bulk or manual capability. Supplied with rigid delivery tube and push-on hydraulic 4-jaw coupling. Accepts standard 400g cartridges.

Highly durable die-cast aluminium alloy pump head. Features Three-way fill with cartridge, bulk or manual capability. Fitted with Two-way operating extendable handle; pistol type, ideal for use in confined spaces and lever type, providing high pressure and volume. Supplied with rigid delivery tube, push-on hydraulic 4-jaw coupling and 300mm flexible delivery tube. Rubber gripped grease tube and handle for easy grip. Features variable stroke for controlled grease volume; half stroke gives low-pressure/low-volume, full stroke provides high-pressure/high-volume delivery. Accepts standard 400g cartridges.

Pistol style grease gun with contoured handle. Highly durable die-cast aluminium alloy pump head with air-bleed valve. Fitted with an innovative quick release mechanism to speed up the refill process. Features 3-way fill with cartridge, bulk and manual capability. Supplied with a rigid delivery tube and push-on hydraulic 4-jaw coupling. Accepts standard 400g cartridges.

• Pistol style grease gun with contoured handle.
• Die-cast aluminium pump head.
• Air-bleed valve.
• Innovative quick release mechanism.
• 3-Way fill with cartridge, bulk and manual capability.
• Supplied with a rigid delivery tube, push-on hydraulic 4-jaw coupling.
• Accepts standard 400g cartridges.
• Model No. AK481

Mini grease applicator supplied with 100g lithium grease cartridge. Ideal for use in hard-to-reach areas such as engine bays and door hinges. Supplied with accurate dispensing nozzle for precision greasing. Replacement cartridges are available Model No. AK51C.