The DEWALT DCK2033X2 Brushless FlexVolt XR Twin Pack, contains the following:

1 x 54V DCH333 XR FlexVolt Brushless SDS Plus Hammer has a brushless motor for extreme run time and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render, and impact stop mode for rotary only drilling in wood and metal.

Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,000/min.Impact Rate: 0-4,480/min. with 3.5 joulesCapacity: Concrete 30mm, Steel 13mm, Wood 26mmWeight 3.7kg

1 x 18V DCD996 XR Brushless Combi Drill with a tough 3-speed all-metal transmission for increased run time and a longer tool life. Electronic Clutch with 11-position adjustable torque control for optimised precision when screwdriving. It also has an improved 3-position LED torch with high/medium/low settings.

Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood 55mm, Steel 15mm, Masonry 16mmWeight: 2.1kg

1 x 18-54V DCB118 FlexVolt XR Fast Charger will charge 54V FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem and battery too hot or too cold conditions. It has a compact design that is wall mountable and is fan cooled so it can charge efficiently between 4°C and 40°C.

Also supplied with: 2 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Batteries and 1 x TSTAK VI.

The DEWALT DCK206M2 Twin Pack, contains the following:

1 x 18V DCH253 3Mode SDS Hammer Drill that is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. The hammer drill has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. It uses 4.0Ah 18V Lithium Ion batteries to deliver high performance, long life and maximum runtime.

No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg.

1 x 18V DCD785 XR Compact Combi Drill has an ultra compact, lightweight design that allows it to be used in confined spaces, whilst the intelligent trigger design allows for total control of application. It has a two speed, all metal transmission for increased run time and a longer tool life.

Chuck: 13mm Keyless.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/bpmTorque: 60Nm, 14 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 38mm

1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries.

Supplied with 2 x 18V 4.0Ah Li-ion Batteries and 1 x DWST1-71195 TSTAK™ Deep Toolbox.

The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following:

1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools.

Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Max. Torque: 57.5Nm, 15 SettingsCapacity: Wood 20mmWeight: 0.9kg

1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools.

No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg

Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box

The DEWALT DCK2111L2T XR Brushless Sub-Compact Twin Pack, contains the following:

1 x 12V DCD706 XR Sub-Compact Combi Drill with an efficient brushless motor that gives 15% more runtime than previous generation. It is 38.5mm shorter than previous generation, allowing you to get into even smaller spaces. 15 Position adjustable torque control for consistent screw driving into a variety of materials.

Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Impact Rate: 25,500/bpmMax. Torque: 57.5Nm, 15 SettingsCapacity: Steel 10mm, Masonry 10mm, Wood 20mmWeight: 1.2kg

1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver is fitted with an efficient brushless motor that gives 15% more runtime than previous generation. With 3 electronic speeds allowing for greater control when working on precise applications. The Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged.The 'Drop and Load' bit holder allows for efficient one-handed operation.

No Load Speed: 0-950/0-1,950/0-2,850/min.Impact Rate: 0-3,600/bpmMax. Torque: 163NmBare Unit Weight: 0.8kg

Also supplied with: 2 x 12V 3.0Ah Li-ion Batteries, 1 x Multi-Voltage XR Charger & 1 x TSTAK Kit Box

The DEWALT DCK218D2T XR Twin Pack, contains the following:

1 x 12V DCD716 Combi Drill is an excellent solution for sub-compact performance and power. Has a high torque output of 30Nm and can drill into masonry. 2-speed transmission ensures easy work of light application. Single clutch collar with 16 adjustable torque control settings.

No Load Speed: 0-1,500/0-4,000/min.Impact Rate: 22,500/bpm.Max. Torque: 30Nm.Torque Settings: 16.Capacity: Metal: 10mm, Masonry: 8mm, Wood: 20mm.

1 x 12V DCF815 Impact Drill with all metal gearing for efficient power transmission and long life. Aluminium front housing provides greater heat dispersion increasing motor life. Parabolic switch profile allows for greater control over speed. 6.35mm 'drop in' key-less hex driver which allows for quick fitment.

Bit Holder: 6.35mm (1/4in).No Load Speed: 2,450/min.Impact Rate: 3,400/min.Max. Torque: 107Nm.Capacity: Bolt M12.

Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x DCB113 XR Charger and 1 x TSTAK™ Toolbox.

The DEWALT DCK2500P2B XR Brushless Tool Connect Twin Pack, contains the following:

1 x 18V DCD797 XR Brushless Combi Drill with Tool Connect which allows you to set up personalised rpm tool modes. This can also help prolong tool and accessory life. It also features customisable LED settings; brightness required and the length of time the light stays on. Three customisable Tool Connect modes allow for the user to switch between different application settings quickly and easily. A fourth 'home' setting guarantees that there is always a familiar base drilling setting available.

Chuck Capacity: 13mm KeylessNo Load Speed: 0-2,000/min.Impact Rate: 0-9,300/0-34,000/bpmMax. Torque Hard/Soft: 70/27NmCapacity: Wood 40mm, Metal 13mm, Masonry 13mm

1 x 18V DCF888 XR Brushless Impact Driver with Tool Connect which allows you to set up personalised rpm tool modes. This can also help prolong tool and accessory life. It also features customisable LED settings; brightness required and the length of time the light stays on. Three customisable Tool Connect modes allows for the user to switch between different application settings quickly and easily. A fourth 'home' setting guarantees that there is always a familiar base drilling setting available. Precision Drive mode offers additional control in screw driving applications to avoid material and fastener damage.

Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 205Nm

Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x DCB113 XR Li-ion Charger and 1 x TSTAK­™ Toolbox.

The DEWALT DCK266P2 XR Brushless Twin Pack, contains the following:

1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screw driving.

Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/3,4000/bpmTorque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm

1 x 18V DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Torque: 26/80/203Nm.

1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8V, 14.4V, and 18V batteries.

Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x TOUGHSYSTEM™ DS150 Toolbox.

The DEWALT DCK266P2T Twin Pack, contains the following:

1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving.

Chuck: 13mmNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/0-34,000/min.Max Torque: 70NmCapacity: Wood 40mm, Steel 13mm, Masonry 13mm

1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in)No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpmMax Torque: 26/80/203NmWeight: 1.56kg

1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes.

Voltage: 10.8/14.4/18V.Battery Chemistry: Li-ion Charging Current: 4.0 A

Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK­™ II Toolbox.

The DEWALT DCK269P2 XR Twin Pack, contains the following:

1 x 18V DCF899 XR Brushless High Torque Impact Wrench with 3 speed and torque settings that gives you the control to best suit your application. The 1/2in (13mm) square drive with detent pin allows for more efficient torque delivery and excellent socket retention.

Bit Holder: 1/2in Detent Pin.No Load Speed: 0-400/0-1,200/0-1,900/min.Impact Rate: 0-2,400/min.Max Torque: 950Nm, Breakaway Torque: 1,625Nm. Max Bolt Diameter: M20.Weight: 2.62kg.

1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster.

No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg.

1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries.

Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.

The DEWALT DCK276P2 Brushless Twin Pack, contains the following:

1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings.

Chuck: 13mm Keyless. No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg.

1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg.

1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries.

Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS150 TOUGHSYSTEM™ Toolbox.

The DEWALT DCK276T2T FlexVolt Twin Pack, contains the following:

1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings.

Chuck: 13mm Keyless. ;No Load Speed: 0-450/0-1,300/0-2,000/Min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg.

1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/Min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg.

1 x 18-54V DCB118 FlexVolt XR Fast Charger that will charge 54V FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It has a compact design that is wall mountable and fan cooled so it can charge efficiently between 4°C and 40°C.

Also supplied with: 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries, 2 x Belt Hooks, 1 x Side Handle for Combi Drill and 1 x DWST1-71195 TSTAK™ Deep Toolbox.

The DEWALT DCK278P2 XR Twin Pack, contains the following:

1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings.

Chuck: 13mm Keyless. No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg.

1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster.

No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg.

1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries.

Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.

The DEWALT DCK305P2T XR Brushless Triple Kit, contains the following:

1 x 18V DCH273P2 XR Brushless 3 Mode Hammer, fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.

Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg

1 x 18V DCF887 XR Brushless Impact Driver, equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg

1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.

No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg

Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x XR Li-ion Charger, 1 x TSTAK I and 1 x TSTAK II.

The DEWALT DCK368P3T XR Brushless 3 Piece Kit, contains the following:

1 x 18V DCD796 XR Brushless Compact Combi Drill which has an ultra compact, lightweight design. The two speed all metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving.

Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmMax Torque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mmWeight: 1.3kg

1 x 18V DCF887 XR Brushless Impact Driver that is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in)No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpmMax Torque: 26/80/203NmWeight: 1.56kg

1 x 18V DCH273 Brushless XR 3 Mode SDS Hammer fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.

Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpmImpact Energy: 2.1 joulesCapacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg

1 x 10.8-18V DCB115 XR Multi-Voltage Charger which has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes.

Also supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x TSTAK­™ II Toolboxes.

The DEWALT DCK623P3 XR Brushless 6 Piece Kit, contains the following:

1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The 2 speed, all metal transmission, provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving.

Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmMax. Torque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mmWeight: 1.3kg

1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg

1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kickback reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.

No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg

1 x 18V DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to central motor position. The 4 position blade clamp allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut.

No Load Speed: 0-2,900/min.Stroke Length: 28.6mmCapacity: Wood 300mm, Steel Sections & Pipes 100mm, PVC 160mmWeight: 2.3kg

1 x 18V DCS570 XR Brushless Circular Saw, ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe 2 handed work.

No Load Speed: 5,500/min.Max. Cutting Depth @90º: 64mmBlade: 184 x 16mm BoreBevel Capacity: 57°

1 x 18V XR Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended runtime and a 250-500 lumen output with broad and even beam pattern. The articulating head has 9 positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use.

Bulb Type: LEDLight Output: 250-500 lumens Protection Class: IP54

Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger and 2 x TOUGHSYSTEM™ DS300 Toolboxes.

The DEWALT DCK665P3T XR Compact Wood Working Kit, contains the following:

1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving.

Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg.

1 x 18V DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planning performance combined with extended run time. With on-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system.

No Load Speed: 15,000/Min.Maximum Depth of Cut: 2mm.Rebating Depth: 9mm.Planer Width: 82mm.Weight: 2.5kg.

1 x 18V DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools.

No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg.

1 x 18V 165mm DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change.

No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg.

1 x 18V DCS331 XR Premium Jigsaw is designed for efficiency and has a powerful and highly efficient DEWALT PM47 fan-cooled motor with replaceable brushes. The intelligent variable speed trigger and lock-off switch ensure quick controlled cuts and enhanced work safety and the quick and easy, patented keyless blade change system accepts T-shank blades.

Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm.Weight: 3.1kg.

1 x 18V XR Li-ion Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended run time and a 250-500 lumen output with broad and even beam pattern. The articulating head has nine positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use.

Bulb Type: LED. Light Output: 250-500 lumens. Protection Class: IP54.

1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries.

Supplied with 3 x 18V 5.0Ah Li-ion Slide Pack Batteries and 2 x DWST1-71195 TSTAK™ Deep Toolboxes.

The DEWALT DCK694T3 Brushless 6 Piece Kit, contains the following:

1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all-metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. It also has an improved 3 position LED torch with high/medium/low settings.

Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood 55mm, Steel 15mm, Masonry 16mmWeight: 2.1kg

1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax Torque: 26/80/205NmWeight: 1.56kg

1 x 18V DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 5,150 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change.

No Load Speed: 5,150/min.Max. Cutting Depth: @90° 55mm, @45° 42.1mmBlade: 165 x 20mm BoreWeight: 3.8kg

1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features XR Lithium-ion Technology and is part of the intelligent XR Lithium-ion Series designed for efficiency and making applications faster.

No Load Speed: 7,000/min.Disc Diameter: 125mmSpindle: M14Weight: 3.0kg

1 x 18V DCS331 XR Premium Jigsaw is designed for efficiency and has a powerful and highly efficient DEWALT PM47 fan-cooled motor with replaceable brushes. The intelligent variable speed trigger and lock-off switch ensure quick controlled cuts and enhanced work safety. Quick and easy, patented keyless blade change system accepts T-shank blades.

Strokes at No Load: 0-3,000/min.Stroke Length: 26mmCapacity: Wood 135mm, Metal 10mmWeight: 3.1kg

1 x 18V DCL040 XR Torch is the latest generation work light, using LED Technology. Compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED bulb produces 110 lumen output (10,000 hr life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with a ratchet lock.

Also supplied with: 3 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries, 1 x DCB118 Multi-Voltage Charger, 2 x DS300 TOUGHSYSTEM™ Toolboxes

The DEWALT DCK699M3T XR 6 Piece Kit, contains the following:

1 x 18V DCD795 Brushless Compact Combi Drill has a lightweight, compact design for use in confined spaces. With 2-speed, all-metal transmission and LED work light.

Chuck: 13mm.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/min.Max Torque: 60Nm.Capacity: Wood: 38mm, Steel: 13mm, Masonry: 13mm

1 x 18V DCF887 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment.

Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/Min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max Torque: 26/80/205Nm.

1 x 18V DCH253 SDS Hammer Drill is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. Has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal.

No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg.

1 x 18V DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades.

Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm.

1 x 18V DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action.

No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg.

1 x 18V DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock.

1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes.

Supplied with 3 x 18V 4.0Ah Li-ion Batteries and 2 x DWST1-71195 TSTAK™ Deep Toolboxes.

The DEWALT DCK755P3T XR 7 Piece Kit, contains the following:

1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving.

Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mm

1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design.

Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg

1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools.

No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kg

1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete.

Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg

1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released.

No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg

1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work.

No Load Speed: 5,500/min.Max. Cutting Depth: @90º 64mmBlade: 184 x 16mm BoreBevel Capacity: 57°

1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible.

Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg

Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 1 x TSTAK™ VI Deep Toolbox (171195), 1 x TSTAK™ II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK™ Mobile Storage with Extendable Handle (175799).

Storm Force° 20V kit, ideal for a multitude of tasks. Supplied with 20V combi drill, 20V 1/4" hex impact driver, 20V SDS+ rotary hammer drill, 20V 115mm angle grinder, 20V reciprocating saw, 20V circular saw, 20V orbital jigsaw, 2 x 2.0Ah li-ion batteries, 1 x 4.0Ah li-ion battery and charger. All stored in a large, multi - pocket tool bag for easy transportation and storage.

• Contents:
• 1 x 20V Combi Drill
• 1 x 20V 1/4" Hex Impact Driver
• 1 x 20V SDS+ Rotary, Hammer Drill
• 1 x 20V 115mm Angle Grinder
• 1 x 20V Reciprocating Saw
• 1 x 20V Circular Saw
• 1 x 20V Orbital Jigsaw
• 2 x 20V 2.0Ah li-ion Batteries
• 1 x 20V 4.0Ah li-ion Battery
• 1 x 20V Fast Charger
• 1 x Tool Bag

Storm Force° 20V kit, ideal for a multitude of tasks. Supplied with 20V combi drill, 20V 1/4" hex impact driver, 20V SDS+ rotary hammer drill, 20V 115mm angle grinder, 20V reciprocating saw, 20V circular saw, 20V orbital jigsaw, 20V random orbit sander, 20V oscillating multi - tool, 2 x 2.0Ah li-ion batteries, 1 x 4.0Ah li-ion battery and charger. All stored in a large, multi - pocket tool bag for easy transportation and storage.

• Contents:
• 1 x 20V Combi Drill
• 1 x 20V 1/4" Hex Impact Driver
• 1 x 20V SDS+ Rotary, Hammer Drill
• 1 x 20V 115mm Angle Grinder
• 1 x 20V Reciprocating Saw
• 1 x 20V Circular Saw
• 1 x 20V Orbital Jigsaw
• 1 x 20V Random Orbit Sander
• 1 x 20V Oscillating Multi - Tool
• 2 x 20V 2.0Ah li-ion Batteries
• 1 x 20V 4.0Ah li-ion Battery
• 1 x 20V Fast Charger
• 1 x Tool Bag

A Draper D20 bundle including a powerful SDS+ rotary hammer drill, a handy cordless 1/4" impact driver, and a useful USB adaptor, supplied with a 5.0Ah battery, three 2.0Ah batteries and two chargers. A great kit for a host of activities, especially useful in the construction and fabrication industries. The SDS+ rotary drill and impact driver feature brushless motors for enhanced performance.

• Contents:
• 1 x D20 20V Brushless 1/4" Impact Driver (86958)
• 1 x D20 20V Brushless SDS+ Rotary Hammer Drill (00592)
• 1 x D20 USB Adaptor (69249)
• 1 x Canvas Tool Bag (72999)
• 3 x D20 20V Li-ion 2.0Ah Battery
• 1 x D20 20V Li-ion 5.0Ah Battery (55907)
• 2 x D20 20V Charger

Draper Storm Force° kit containing a 20V combi drill, SDS+ rotary hammer drill, 1 x 4.0Ah battery, 2 x 2.0Ah batteries, charger and 440mm tool bag easy transportation and storage.

• Contents:
• 1 x 20V Combi Drill with Two li-ion Batteries
• 1 x 20V SDS+ Rotary Hammer Drill
• 1 x 20V 4.0Ah li-ion Battery
• 2 x 20V 2.0Ah li-ion Battery
• 1 x Hour Charger
• 1 x 440mm Tool Bag

Draper Storm Force° kit containing a 20V combi drill, 20V 1/4" hex impact driver, 1 x 4.0Ah battery, 2 x 2.0Ah batteries, charger and 440mm tool bag easy transportation and storage.

• Contents:
• 1 x 20V Combi Drill
• 1 x 20V 1/4" Hex. Impact Driver
• 1 x 20V 4.0Ah li-ion Battery
• 2 x 20V 2.0Ah li-ion Battery
• 1 x Hour Charger
• 1 x 440mm Tool Bag

Storm Force° 20V cordless fixing kit. Supplied with 20V combi drill, 20V 1/4" hex impact driver, 20V SDS+ rotary hammer drill, 2 x 2.0Ah li-ion batteries, 1 x 4.0Ah li-ion battery and charger. All stored in a 440mm hard bottom tool bag for easy transportation and storage.

• Contents:
• 1 x 20V Combi Drill
• 1 x 20V 1/4" Hex Impact Driver
• 1 x 20V SDS+ Rotary, Hammer Drill
• 2 x 20V 2.0Ah li-ion Batteries
• 1 x 20V 4.0Ah li-ion Battery
• 1 x 20V Fast Charger
• 1 x 440mm Tool Bag

Storm Force° 20V cordless workshop kit, containing tools for everyday workshop use. Supplied with 20V combi drill, 20V 1/2" impact wrench, 2 x 2.0Ah li-ion batteries, 1 x 4.0Ah li-ion battery and charger. All stored in a 440mm hard bottom tool bag for easy transportation and storage.

• Contents:
• 1 x 20V Combi Drill
• 1 x 20V 1/2" Impact Wrench
• 2 x 20V 2.0Ah li-ion Batteries
• 1 x 20V 4.0Ah li-ion Battery
• 1 x 20V Fast Charger
• 1 x 440mm Tool Bag

Storm Force° 20V cordless mega kit, containing tools for everyday use. Supplied with 20V combi drill, 20V 1/2" impact wrench, 20V 115mm angle grinder, 2 x 2.0Ah li-ion batteries, 1 x 4.0Ah li-ion battery and charger. All stored in a 440mm hard bottom tool bag for easy transportation and storage.

• Contents:
• 1 x 20V Combi Drill
• 1 x 20V 1/2" Impact Wrench
• 1 x 20V 115mm Angle Grinder
• 2 x 20V 2.0Ah li-ion Batteries
• 1 x 20V 4.0Ah li-ion Battery
• 1 x 20V Fast Charger
• 1 x 440mm Tool Bag

Save money with this big deal from Draper! The Ultimate Deal combines four power tools from the Storm Force range, plus three Li-ion batteries and a handy tool bag to keep them safe and ready to go.

Set includes:

• Storm Force 10.8V cordless hammer drill with 2 x lithium-ion batteries (available as Rapid part 91-7270)
• Storm Force 10.8V cordless impact driver (91-7272)
• Storm Force 10.8V cordless reciprocating saw (91-7274)
• Storm Force 10.8V cordless ratchet (91-7273)
• 10.8V lithium-ion battery (available as Rapid part 91-7275)
• Storm Force tool bag 420 x 290 x 230mm

Save money with this big deal from Draper! The Mega Deal combines two power tools from the Storm Force range, plus three Li-ion batteries and a handy tool bag to keep them safe and ready to go.

Set includes:

• Storm Force 10.8V cordless hammer drill with 2 x lithium-ion batteries (available as Rapid part 91-7270)
• Storm Force 10.8V cordless rotary drill (91-7271)
• 10.8V lithium-ion battery (available as Rapid part 91-7275)
• Storm Force tool bag 420 x 290 x 230mm

Save money with this big deal from Draper! The Super Deal combines two power tools from the Storm Force range, plus three Li-ion batteries and a handy tool bag to keep them safe and ready to go.

Set includes:

• Storm Force 10.8V cordless hammer drill with 2 x lithium-ion batteries (available as Rapid part 91-7270)
• Storm Force 10.8V cordless impact driver (91-7272)
• 10.8V lithium-ion battery (available as Rapid part 91-7275)
• Storm Force tool bag 420 x 290 x 230mm

Features: Part of the D20 series, Freehand nibbler head, Auxiliary handle, Safety lock trigger switch, Supplied with a spanner, 2 x hex keys and 2 x cutting bits, Batteries and chargers are available separately

• Battery D20 20V Li-ion
• No load speed 1700rpm
• Max sheet thickness 1.2mm
• Min cutting radius 25mm⌀
• Batteries Per Item Sold separately
• Charger Type Sold separately
• Supplied in Case No
• Weight (bare tool) 2.7kg

Features: Part of the D20 series, Fitted with a preset PSI, KPA and BAR LCD display, Tyre valve connectors and 2 inflation nozzles, LED work light, Batteries and chargers are available separately. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.

• Battery D20 20V Li-ion
• Maximum pressure 110psi (7.5BAR)
• Batteries Per Item Sold separately
• Charger Type Sold separately
• Supplied in Case No
• Weight (bare tool 0.7kg

Features: Part of the D20 series, A detachable dust collection chamber, Powerful suction, Supplied with extension tube, crevice nozzle, brush head, hard floor head, filter bag cage, filter bag, accessory holder, Batteries and chargers are available separately. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.

• Battery D20 20V Li-ion
• Dust capacity 600ml
• Batteries Per Item Sold separately
• Charger Type Sold separately
• Supplied in Case No
• Weight (bare tool) 1.5kg

Features: Part of the D20 series, 3 lighting functions, Adjustable beam direction, Hanging hook, Batteries and chargers are available separately. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.

• Battery D20 20V Li-ion
• Max Power 20W
• Lumen 1800
• Batteries Per Item Sold separately
• Charger Type Sold separately
• Supplied in Case No
• Weight 1.5kg

Features: Part of the XP20 series, 7 - position adjustment, 2 brightness settings, A USB port for charging mobile phones. XP20 interchangeable battery system allows you to combine one battery with any of the tools within the XP20 series.

• Power Voltage Supply 20V
• Max Lumens 2,000
• USB output 5V/ 1A
• Battery Technology XP20 Li-ion
• Batteries Per Item N/A
• Charger Type N/A
• Supplied in Case No
• Weight 0.47kg

Features: Part of the D20 series, Turns a D20 battery into a power bank, Capable of charging a wide range of electronic devices, Inbuilt LED worklight, Batteries and Chargers are available separately. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.

This brushless D20 kit includes the powerful combi drill and combi driver. The combi drill has 23 torque settings, metal keyless chuck and variable speed control with electronic brake. The driver has a quick release chuck, variable speed control and electronic brake. Both have a super bright LED work light. 3.0AH and 4.0AH batteries, battery charger and a heavy duty 28L water repellent tool bag are also supplied as part of this kit.

• 1 x D20 Brushless Combi Drill (Bare) (55338)
• 1 x D20 Brushless Impact Driver (Bare) (55375)
• 1 x Heavy Duty Medium Tool Bag 28L (87359)
• 1 x D20 3.0AH Battery (00649)
• 1 x D20 4.0AH Battery (55898)
• 1 x D20 1.65A Battery Charger (60559)

Part of the D20 series, the grinder has a brushless motor, spindle lock, 3 position side handle and M14 thread. The kit comes complete with a D20 4.0AH battery, D20 4A fast battery charger and a heavy duty medium 28L tool bag made from water repellent polyester.

• 1 x D20 Brushless 115mm A.Grinder (Bare) (55478)
• 1 x D20 4.0AH Battery (55898)
• 1 x D20 4A Fast Battery Charger (55913)
• 1 x Heavy Duty Medium Tool Bag 28L (87359)

This useful kit includes the D20 brushless combi drill with 23 torque settings, metal keyless chuck, variable speed with electronic brake, and super bright LED work light. It comes complete with D20 3.0AH and 4.0AH batteries, 1.65A battery charger, and a heavy duty medium 28L tool bag made from water repellent polyester.

• 1 x D20 Brushless Combi Drill (Bare) (55338)
• 1 x Heavy Duty Medium Tool Bag 28L (87359)
• 1 x D20 3.0AH Battery (00649)
• 1 x D20 4.0AH Battery (55898)
• 1 x D20 1.65A Battery Charger (60559)

Features: Part of the D20 series, 1x 20V lithium-ion battery, D20 battery charger, 2 speed 110 and 210km/h, Extends to 720mm. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series

• Battery D20 20V Li-ion
• No-load speed 13000rpm
• Batteries Per Item 1x 2Ah
• Charger Type 4A
• Wind speed 110 and 210 km/h
• Length 720mm
• Supplied in Case No
• Weight (bare tool) 2.2kg

Draper D20 workshop kit. The kit contains essential tools for everyday workshop tasks. Supplied with a brushless combi drill, brushless impact wrench, brushless 115mm grinder, D20 Flexiinspection lamp, 3.0Ah battery and 4.0Ah battery, charger, plastic storage case and a tin of ten metal cutting discs. All stored in a 440mm hard bottom tool bag for easy transportation and storage. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.

• Contents:
• 1x D20 Combi Drill
• 1x D20 Brushless Impact Wrench
• 1x D20 Brushless 115mm Angle Grinder
• 1x D20 Flexi Inspection Lamp
• 1x D20 3.0Ah battery
• 1x D20 4.0Ah battery
• 1x D20 Charger
• 1x D20 Storage Case
• 1x Storage Bag
• 10x Metal Cutting Discs

Draper D20 fix 'N' go kit containing essential tools for everyday workshop tasks. Supplied with a brushless combi drill, brushless impact driver, D20 twin-port USB adaptor, 2x 2.0Ah batteries, charger and an impact screwdriver bit set. All stored in a 440mm hard bottom tool bag for easy transportation and storage. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.

• Contents:
• 1x D20 Brushless Combi Drill
• 1x D20 D20 Brushless Impact Driver
• 2x D20 2.0Ah Batteries
• 1x D20 Battery Charger
• 1x D20 Twin Port USB Adaptor
• 1x Impact Screwdriver Bit Set
• 1x 440mm Tool Bag

Draper D20 Jumbo kit containing essential tools for most workshop tasks. Supplied with brushless combi drill, brushless impact driver, brushless 115mm grinder, brushless circular saw, brushless reciprocating saw, tri - base sander, nailer/stapler, 3.0Ah battery, 5.0Ah battery and fast charger. All stored in a 550mm hard bottom tool bag with wheels for easy transportation and storage. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.

• Contents:
• 1x D20 Brushless Combi Drill
• 1x D20 Brushless 115mm Angle Grinder
• 1x D20 Brushless Impact Driver
• 1x D20 Tri - Base Sander
• 1x D20 Nailer/Stapler
• 1x D20 Brushless Circular Saw
• 1x D20 Brushless Reciprocating Saw
• 1x D20 3.0Ah Battery
• 1x D20 5.0Ah Battery
• 1x D20 Fast Battery Charger
• 1x 550mm Tool Bag with Wheels

An ultra-compact and powerful pruning saw that utilises D20 multi-tool battery technology. Despite its lightweight and compact design it still delivers fast and powerful cutting, and thanks to the impressive D20 lithium-ion battery technology it cuts up to 60mm diameter of wood and even 3mm of metal, making it ideal for cutting through nails holding fence panels together. Batteries and chargers are available separately. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.

• Contents:
• 1x Pruning Saw
• 1x 150mm 7tpi blade
• 1x 150mm 19tpi blade

A compact, powerful and lightweight chainsaw that utilises D20 multi - tool battery technology. Fitted with a host of features including a low kickback Oregon® bar and chain, easy to use tool - free chain tensioner, larger than average fell handle, automatic chain brake, automatic chain lubrication and oil level indicator window. All these features result in a chainsaw ideally suited for use with forestry, agriculture and garden activities.Batteries and chargers are available separately.

• Battery D20 20V Li-ion x 2
• Bar length 355mm
• Max engine speed 4500rpm
• Chain speed 8.5M/S
• Batteries Per Item N/A
• Charger Type N/A
• Supplied in Case No
• Weight (bare tool) 4kg

Features: Part of the D20 series, 2 speed 110 and 210km/h, Extends to 720mm, Batteries and chargers are available separately. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.

• Battery D20 20V Li-ion
• No-load speed 13000rpm
• Batteries Per Item N/A
• Charger Type N/A
• Wind speed 110 and 210 km/h
• Length 720mm
• Supplied in Case No
• Weight (bare tool) 2.2kg

This kit includes six of the most popular Draper Storm Force 10.8V power tools from the range, complete with 3x 1.5Ah Li-ion batteries and a charger. The whole kit can be stored in the supplied tool bag. Draper Storm Force® 10.8V interchangeable battery system allows you to combine one battery with any of the tools within the 10.8V Storm Force series (not compatible with Draper Storm Force® 20V).

• Contents:
• 1x 10.8V Combi Drill (with case) (16048)
• 1x 10.8V Impact Driver (17132)
• 1x 10.8V 3/8" Impact Wrench (80Nm) (02337)
• 1x 10.8V Mini Polisher (02330)
• 1x 10.8V Rotary Multi-Tool Kit (50 Piece) (02343)
• 1x 10.8V Ratchet (17135)
• 3x 10.8V 1.5Ah Li-ion Batteries (16048)
• 1x 10.8V One Hour Charger
• 1x 420mm Draper Storm Force Tool Bag (30237)

This kit includes four of the most popular Draper Storm Force 10.8V power tools from the range, complete with 2x 1.5Ah Li-ion batteries and a charger. The whole kit can be stored in the supplied tool bag. Draper Storm Force® 10.8V interchangeable battery system allows you to combine one battery with any of the tools within the 10.8V Storm Force series (not compatible with Draper Storm Force® 20V).

• Contents:
• 1x 10.8V Combi Drill (with case) (16048)
• 1x 10.8V Impact Driver (17132)
• 1x 10.8V 3/8" Impact Wrench (80Nm) (02337)
• 1x 10.8V Ratchet (17135)
• 2x 10.8V 1.5Ah Li-ion Batteries
• 1x 10.8V One Hour Charger
• 1x 420mm Draper Storm Force Tool Bag

Part of the Draper Storm Force® 10.8V Interchange range this workshop kit features a 10.8V cordless ratchet, 10.8V 3/8" impact wrench (80Nm), 10.8V rotary drill, 2x 4.0Ah li-ion batteries, 1x 1.25Ah battery and charger. All stored in a 420mm hard bottom tool bag for easy transportation and storage. Draper Storm Force® 10.8V interchangeable battery system allows you to combine one battery with any of the tools within the 10.8V Storm Force series (not compatible with Draper Storm Force® 20V).

• Contents:
• 1x 10.8V Cordless Ratchet
• 1x 10.8V 3/8" Impact Wrench (80Nm)
• 1x 10.8V Rotary Drill
• 1x 10.8V 4.0Ah Li-Ion Batteries
• 1x 10.8V 1.25Ah Battery
• 1x 10.8V Fast Charger
• 1x 420mm Tool Bag

This Draper Storm Force 20V cordless kit includes the 115mm Angle Grinder, 10 metal cutting wheels and 5 metal grinding discs. It comes with 2 20V 4.0Ah batteries and a fast charger, which are compatible with the whole 20V Storm Force Interchange Series. Tidy it away in the supplied heavy-duty tool bag for easy storage and transportation.

• Contents:
• 1x 20V 115mm Angle Grinder
• 1x Flat Metal Cutting Wheels 115 x 22.2 x 1.2mm (Tin of 10)
• 5x Grinding Disc with Depressed Centre Bore 115 x 6 x 22.2mm
• 1x 20V One Hour Charger
• 2x 20V 4.0Ah Li-ion Battery
• 1x Professional Safety Goggles
• 1x 420mm Open Mouth Tool Bag