This saw stand from Bosch has been designed for the GTS 10 J Professional Saw. The stand is easy to transport and set up.

• Height of work bench: 602mm
• Length of work bench: 520mm
• Weight: 6.3kg
• Manufacturer's part 0601B22001

This Rotary Hammer Drill replacement handle from Bosch is compatible with the GSH 10 C and GSH 11 E Pro drills.

Handle for rotary hammers, suitable for GSH 10 C; GSH 11 E Professional.

• Type: Drill handle
• Application: For GSH 10 C & GSH 11 E Professional
• Angle: 360° swivel
• Manufacturer's part no.: 2602025076

This Drill Sharpener from Bosch will accept up to 10mm drill bits.

Drill bit sharpener S 41.

• Type: Drill sharpener
• Manufacturer's part no.: 2607990050

These 6mm Collets from Bosch are available for 6 and 8mm shanks. Supplied without a clamping nut. For use with GGS 27/ GGS 27C.

Collet without locking nut 6 mm, suitable for GGS 27; GGS 27 C Professional; POF 500 A; POF 600 ACE.

• Type: Collet 6mm
• Diameter: 6mm
• Manufacturer's part no.: 2608570047

These DEWALT FlexVolt Mitre Saw Adaptor Cables have been designed for use with the FlexVolt Mitre Saw model DHS780, enabling them to operate from mains power. They are also generator compatible, providing users with increased flexibility.

Available in both 240 and 110 Volt versions.

Cable Length: 3.2m.

1 x DEWALT DCB500L FlexVolt Mitre Saw Adaptor Cable 110 Volt Version

The DEWALT DCE5601 Replacement Silicon Gun Cartridge for use with DCE580 XR Caulk Gun.

Specification:

Capacity: 300ml

The DEWALT DE7260 Mitre Saw Folding Rolling Stand has an easily adjustable mounting system that simplifies tool attachment and ensures universal compatibility. It has 2 height settings and is fitted with wide supports that extend up to 2.4m, with a capacity up to 135kg, providing excellent material support.

The stand is fitted with pneumatic assists for easy set up and collapse, XL rubber wheels for improved jobsite mobility and no punctures and a kickstand for vertical storage. This compact vertical storage option provides improved mobility and ease of transport.

Specification:

Max. Load: 135kgMax. Extension: 2.4m

The DEWALT DE7400-XJ Rolling Table Saw Stand is fitted with large heavy-duty wheels that have been designed to easily roll over steps, kerbs, and jobsite debris. The folding legs are fitted with quick release levers which retract under the stand in a few seconds for easy and quick transport. It is made from lightweight aluminium, which improves the portability.

The heavy-duty kick stand allows the stand to balance upright for mobility and storage. There is also a retractable soft grip handle that slides out, allowing the user to pull the saw behind him comfortably. Stand design allows portability when the table saw is attached to the stand which increases productivity.

It is perfect for correct height and stability for all applications as well as ripping skirting, sheet material and roofing timbers on the jobsite.

The stand is supplied with universal brackets, that attach to most table saws.

A vacuum cleaner brush for delicate surfaces.

• Suitable for:
• Draper 48498 (91-5532)
• Draper 48499 (91-5537)
• Draper 48497 and 08101
• Draper type 9208

A brush insert for Draper vacuum cleaners.

• Suitable for:
• (91-5532) 48498
• (91-5537) 48499
• 48497 and 08101
• Draper type 9209

A pack of 5 dust bags for Draper Vacuum Cleaner 10966 (91-5346).

• Dust bags for 10966
• Supplied in a pack of 5
• Draper type 12394

Comprises one of each size tube: 12.7, 19.05, 25.4, 38.1, 50.8 and 76.2 x 110mm. Fibre backed heavy duty abrasive. For use with Draper Bobbin Sander Stock No.10773. Display packed.

14m (approx.) long extension cable with 16A approved plug and 16A socket.

Spare approved plugs and sockets are available separately.

• Cable cross sectional area 1.5mm²
• Draper stock no. 17568
• Draper part no. EL241A

14m (approx.) long extension cable with 16A approved plug and 16A socket.

Spare approved plugs and sockets are available separately.

• Cable cross sectional area 2.5mm²
• Draper stock no. 17569
• Draper part no. EL241B

The Draper Extension Tube for Vacuum Cleaner (91-5346) 10966 and WC2000 is ideal for use around the home, workshop or car etc.

Specification:
• Max. vacuum pressure: 20-22KPa
• (200-220mbar)
• Dust capacity: 1.5L
• Dimensions in horizontal mode (approx.):
• Length .. 280mm
• Height: 210mm
• Depth: 400mm
• Weight: 5kg

The Draper Flexible Hose for VC1600 (91-5346) 10966 and VC2000B is ideal for use around the home, workshop or car etc.

Specification:
• Max. vacuum pressure: 20-22KPa
• (200-220mbar)
• Dust capacity: 1.5L
• Dimensions in horizontal mode (approx.):
• Length .. 280mm
• Height: 210mm
• Depth: 400mm
• Weight: 5kg

The Draper Upholstery Nozzle for VC1600 (91-5346) 10966 and VC2000B is ideal for use around the home, workshop or car etc.

Specification:
• Max. vacuum pressure: 20-22KPa
• (200-220mbar)
• Dust capacity: 1.5L
• Dimensions in horizontal mode (approx.):
• Length .. 280mm
• Height: 210mm
• Depth: 400mm
• Weight: 5kg

Bakelite body with rubber turbine for durability. Pumping capacity 1000L per hour. Supplied complete with two 13mm adaptors for 6.5mm diameter pipe. Display packed.

The Draper Crevice Nozzle for VC1600 (91-5346) 10966 and VC2000B is ideal for use around the home, workshop or car etc.

Specification:
• Max. vacuum pressure: 21-23KPa
• (210-230mbar)
• Dust bag capacity: 3L
• Dimensions in horizontal mode (approx.):
• Length .. 260mm
• Height: 200mm
• Depth: 400mm
• Weight: 5kg

The Draper Cloth Dust Filter for WDV50SS (91-5537) 48499 is ideally suited for use in the workshop and garage or DIY work around the home and garden.

Specification:
• Max. vacuum pressure: 24KPa (240mbar)
• Max. air flow: 65L/sec
• Tank volume: 50L
• Power take off rating: 1000W
• Dimensions:
• - height (inc castors): 720mm
• - base: 440 x 440mm
• Weight: 10kg

The Draper Nylon Dust Filter for WDV50SS (91-5537) 48499 is ideally suited for use in the workshop and garage or DIY work around the home and garden.

Specification:
• Max. vacuum pressure: 26KPa (260mbar)
• Max. air flow: 70L/sec
• Tank volume: 50L
• Power take off rating: 2200W
• Dimensions:
• - height (inc castors): 720mm
• - base: 440 x 440mm
• Weight: 10kg

The Draper Paper Dust Bags (Pack of 5) for WDV50SS/110 is ideally suited for use in the workshop and garage or DIY work around the home and garden.

Specification:
• Max. vacuum pressure: 24KPa (240mbar)
• Max. air flow: 65L/sec
• Tank volume: 50L
• Power take off rating: 1000W
• Dimensions:
• - height (inc castors): 720mm
• - base: 440 x 440mm
• Weight: 10kg

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 28
• Grade: No. 2/0
• Width x thickness: 0.62 x 0.29
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25498

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 25
• Grade: No. 0
• Width x thickness: 0.67 x 0.32
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25499

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 23
• Grade: No. 1
• Width x thickness: 0.76 x 0.34
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25500

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 20
• Grade: No. 2
• Width x thickness: 0.82 x 0.36
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25501

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 18
• Grade: No. 3
• Width x thickness: 0.90 x 0.38
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25502

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 15
• Grade: No. 4
• Width x thickness: 0.97 x 0.40
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25503

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 12
• Grade: No. 5
• Width x thickness: 0.97 x 0.40
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25504

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 13
• Grade: No. 6
• Width x thickness: 1.13 x 0.45
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25505

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 11.5
• Grade: No. 7
• Width x thickness: 1.25 x 0.45
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25506

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 11.5
• Grade: No. 9
• Width x thickness: 1.45 x 0.50
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25508

Fretsaw blades made from carbon steel with hardened steel teeth and plain ends at both ends.

Suitable for cutting wood, plastics, non-ferrous metals and most other materials.

• Teeth per inch: 10
• Grade: No. 12
• Width x thickness: 1.65 x 0.60
• Length: 127mm
• Plain both ends
• Supplied in packs of 12
• Draper type 25509

For use with circular saw blades to minimise or maximise bore. Sold loose.

For use with circular saw blades to minimise or maximise bore. Sold loose.

Replacement whetstone grinder wheel from Draper suitable for use with the 31235 wet and dry bench grinder (Rapid part 91-5504).

• Wheel diameter: 200mm
• Wheel bore: 80mm
• Speed: 320r/min
• Manufacturer's part 29804

For trueing, cleaning, sharpening and shaping grinding wheels. Each dresser comprises of six individual wheels. Spare wheels are available in units of six only. Display packed. *Sold loose

This absorber mat from Draper is ideal for reducing machine vibration and noise. It is suitable for use with bench top machine tools such as grinders, fretsaws, bandsaws, belt and disc sanders.

• Dimensions 600 x 300mm
• Manufacturer's part 30743

This wet and dry bench grinder from Draper has been designed for the workshop to hone and grind hand and garden tools. It is supplied with a horizontal whetstone honing wheel, dry white grinding wheel, eye protection shield, spark deflectors, wheel guards and adjustable tool rests.

• White dry grinding wheel especially suitable for high speed steel tooling
• Fitted with a BS approved non-rewireable 3 pin moulded plug and cable
• Whetstone wheel diameter: 200mm
• Whetstone wheel bore: 80mm
• Dry white stone wheel dia: 125mm
• Dry white stone wheel bore: 12.7mm
• Whetstone wheel speed: 320r/min
• Dry white stone wheel speed: 2850rpm
• Manufacturer's part 31235

Plastic bodied pump for use with portable electric drill of 400W or more. Acetal copolymer body with stainless steel internal parts. Running speed 2000-3000rpm. Delivery rate approximately 2497-2591 litres per hour. Maximum head height 15M. Supplied complete with 1 set of spare washers and vanes. Bore I/D 16mm. Display packed.

For use with Draper bench grinders and other manufacturers similar machines. Supplied complete with reducing bushes size; 12.7, 16, 20, 22.2 and 26mm. Display packed.

The Draper Crimped Steel Wire Brushes 200 x 19mm are for use with Draper bench grinders and other manufacturers similar machines.

• Display packed

Plated steel body with carbide tip and pocket clip. For marking on hard and soft materials including steel and ceramics. Display packed.

Replacement drystone grinder wheel from Draper suitable for use with the 31235 wet and dry bench grinder (Rapid part 91-5504).

• Wheel diameter: 125mm
• Wheel bore: 12.7mm
• Speed: 2850rpm
• Manufacturer's part 38186

A reducing adaptor 100 x 58mm for Draper dust extractors DE1245 and DE2400.

• Draper type 40146

An extraction hose 2m x 58mm for Draper dust extractors DE1245 and DE2400.

• Draper type 40147

An extraction hose 2 x 32mm for Draper dust extractors DE1245 and DE2400.

• Draper type 40150

A drum filter for Draper dust extractor DE1245.

• Draper type 40151

A drum filter for Draper dust extractor DE2400.

• Draper type 40152

A cartridge filter for Draper dust extractors DE1245 and DE2400.

• Draper type 40153