Bahco BP218 Air Blow Gun has a brass inlet and meets the OSHA requirements. It has a 1/4in connector.

SpecificationAir Inlet BSP: 1/4in.Output pressure: 2.07bar.Working pressure: 6.3bar.Fluid delivery: 190-250 ml/min Airflow: 158 l/min.Maximum Air pressure input: 11 bar Length: 210mm.Weight: 0.15kg.

Sound pressure level: 80 dBA.

The Bahco Impact Wrench has a durable insulated composite housing with a twin hammer mechanism and a three-step power regulator. Its 360º swivel connection helps avoid hose coiling. Supplied in a robust plastic case with a foam inlay that fits into the Bahco T-module system T12.

Contains:

1 x BP815 1/2in Impact Wrench1 x 1/4in Threaded Male Connector11 x Impact Sockets: 10, 11, 12, 13, 14, 15, 17, 19, 21, 22, and 24mm

Specification

Air Inlet BSP: 1/4inWorking pressure: 6.3barNo Load Speed: 7,000/min.Impacts Per Minute: 1,150/bpmTorque Range: 320-620NmMax. Torque (Reverse): 825NmAir Consumption: 130 l/min. Hose Length: 10mLength: 192mmWeight: 1.95kg

The Bahco BP825 Reversible Air Drill has a composit housing and rubber grip handle for optimal user comfort. It also comes with a removable, adjustable second handle.

The forward/reverse lever allows for a quick and easy change of direction. An air exhaust in the handle allows for a clean and pleasent operation. Whilst the quick chuck allows for quick bit changes.

Specification

Air inlet BSP: 1/4inChuck Size: 13mmNo Load Speed: 450/min.Air Consumption: 105l/min.Recommended Hose Size: 10mmWeight: 1.35kg

Sound pressure level: 88 dBAVibration level: 2.5m/s

This multi-page stapler from Bosch can be used with the PTK 3.6 cordless tacker for stapling up to 60 sheets of paper. It is best for fixing thin materials on flat surfaces.

• Weight: 59g
• Dimensions: 18.6 x 6.4 x 2.8cm
• Manufacturer's part 1600A0018C

This leaflet stapler from Bosch can be used with the PTK 3.6 cordless tacker for stapling up to 30 sheets of paper.

• Use for paper sizes up to A4 (21cm width)
• Weight: 59g
• Dimensions: 18.4 x 6.4 x 2.6cm
• Manufacturer's part 1600A0018D

This pack of 20000 stanox mini pins 12mm from Bostitch have a headless design and can be used for temporary tacking whilst glue dries, as they can be removed with little damage to the work. Ideal for fine molding and trim work involving wood panels - the wood closes over them after driving eliminating the need for time consuming filling.

Compatible with the Bostitch TU216-2330 headless pinner.

• Length: 12mm
• Finish: Stanox (Copperwash)
• Quantity per box: 20000
• Manufacturer's part 1061200Z

This pack of 20000 stanox mini pins 18mm from Bostitch have a headless design and can be used for temporary tacking whilst glue dries, as they can be removed with little damage to the work. Ideal for fine molding and trim work involving wood panels - the wood closes over them after driving eliminating the need for time consuming filling.

Compatible with the Bostitch TU216-2330 headless pinner.

• Length: 18mm
• Finish: Stanox (Copperwash)
• Quantity per box: 20000
• Manufacturer's part 1061800Z

This pack of 20000 stanox mini pins 30mm from Bostitch have a headless design and can be used for temporary tacking whilst glue dries, as they can be removed with little damage to the work. Ideal for fine molding and trim work involving wood panels - the wood closes over them after driving eliminating the need for time consuming filling.

Compatible with the Bostitch TU216-2330 headless pinner.

• Length: 30mm
• Finish: Stanox (Copperwash)
• Quantity per box: 10000
• Manufacturer's part 1063000Z

This pack of 10000 84 Series staples stanox 6mm from Bostitch are durable staples/fasteners which can be used for the TU-216-84-E and other tools using 84 gauge, including the 21684B-E and ML10SIC-84/16.

• Length: 6mm
• Crown width: 12.3mm
• Wire gauge: 0.5 x 1mm
• Finish: Stanox
• Point: CP
• Quantity per box: 10000
• Manufacturer's part 1840600Z

This pack of 10000 84 Series staples stanox 8mm from Bostitch are durable staples/fasteners which can be used for the TU-216-84-E and other tools using 84 gauge, including the 21684B-E and ML10SIC-84/16.

• Length: 8mm
• Crown width: 12.3mm
• Wire gauge: 0.5 x 1mm
• Finish: Stanox
• Point: CP
• Quantity per box: 10000
• Manufacturer's part 1840800Z

This pack of 10000 84 Series staples stanox 10mm from Bostitch are durable staples/fasteners which can be used for the TU-216-84-E and other tools using 84 gauge, including the 21684B-E and ML10SIC-84/16.

• Length: 10mm
• Crown width: 12.3mm
• Wire gauge: 0.5 x 1mm
• Finish: Stanox
• Point: CP
• Quantity per box: 10000
• Manufacturer's part 1841000Z

This pack of 10000 84 Series staples stanox 12mm from Bostitch are durable staples/fasteners which can be used for the TU-216-84-E and other tools using 84 gauge, including the 21684B-E and ML10SIC-84/16.

• Length: 12mm
• Crown width: 12.3mm
• Wire gauge: 0.5 x 1mm
• Finish: Stanox
• Point: CP
• Quantity per box: 10000
• Manufacturer's part 1841200Z

This pack of 10000 84 Series staples stanox 14mm from Bostitch are durable staples/fasteners which can be used for the TU-216-84-E and other tools using 84 gauge, including the 21684B-E and ML10SIC-84/16.

• Length: 14mm
• Crown width: 12.3mm
• Wire gauge: 0.5 x 1mm
• Finish: Stanox
• Point: CP
• Quantity per box: 10000
• Manufacturer's part 1841400Z

This 84 Series stapler 16mm from Bostitch is a compact stapling tool weighing just 0.8kg, making it the perfect unit for confined spaces where access is limited.

Manufactured to a high standard with numerous excellent features, including the variable power control, secondary safety trigger, adjustable depth control and rear exhaust, making it ideal for furniture manufacturing, moulding and trim work. The 21684B-E also features a magazine capacity of 125 staples.

Compatible with 44 Series fasteners: 0.5-1mm diameter, 12.3mm crown and 4-16mm length.

• Rubber comfort grip
• Magazine capacity: 125
• Weight: 0.83kg
• 40 x 221 x 150mm (W x L x H)
• Manufacturer's part 21684B-E

This pack of 5000 powerslam staples 6mm from Bostitch are durable staples with a galvanised finish, designed for roofing felt, tar paper, insulation, carpet pads and plastic sheeting. Compatible with the Powerslam Hand Tacker.

• Crown: 10mm
• Length: 6mm
• Finish: Galvanised
• Point: CP
• Pack of 5000
• Manufacturer's part 501906Z

This pack of 5000 powerslam staples 8mm from Bostitch are durable staples with a galvanised finish, designed for roofing felt, tar paper, insulation, carpet pads and plastic sheeting. Compatible with the Powerslam Hand Tacker.

• Crown: 10mm
• Length: 8mm
• Finish: Galvanised
• Point: CP
• Pack of 5000
• Manufacturer's part 501908Z

This pack of 5000 powerslam staples 10mm from Bostitch are durable staples with a galvanised finish, designed for roofing felt, tar paper, insulation, carpet pads and plastic sheeting. Compatible with the Powerslam Hand Tacker.

• Crown: 10mm
• Length: 10mm
• Finish: Galvanised
• Point: CP
• Pack of 5000
• Manufacturer's part 501910Z

This pack of 5000 powerslam staples 12mm from Bostitch are durable staples with a galvanised finish, designed for roofing felt, tar paper, insulation, carpet pads and plastic sheeting. Compatible with the Powerslam Hand Tacker.

• Crown: 10mm
• Length: 12mm
• Finish: Galvanised
• Point: CP
• Pack of 5000
• Manufacturer's part 501912Z

This pack of 1000 galvanised 15mm brown brad nails from Bostitch have a rectangular cross section and are compatible with the Bostitch brad nailer. Equipped with diameters less than coil and stick nails, while manufactured using 18 gauge wire, these nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Length: 15mm
• Colour: Brown
• Pack of 1000
• Manufacturer's part BT1300B-1M

This pack of 1000 galvanised 19mm brown brad nails from Bostitch have a rectangular cross section and are compatible with the Bostitch brad nailer. Equipped with diameters less than coil and stick nails, while manufactured using 18 gauge wire, these nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Length: 19mm
• Colour: Brown
• Pack of 1000
• Manufacturer's part BT1303B-1M

This pack of 1000 galvanised 25mm brown brad nails from Bostitch have a rectangular cross section and are compatible with the Bostitch brad nailer. Equipped with diameters less than coil and stick nails, while manufactured using 18 gauge wire, these nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Length: 25mm
• Colour: Brown
• Pack of 1000
• Manufacturer's part BT1309B-1M

This pack of 1000 galvanised 30mm brown brad nails from Bostitch have a rectangular cross section and are compatible with the Bostitch brad nailer. Equipped with diameters less than coil and stick nails, while manufactured using 18 gauge wire, these nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Length: 30mm
• Colour: Brown
• Pack of 1000
• Manufacturer's part BT1314B-1M

This pack of 5000 BT Series galvanised mini brad nails 15mm from Bostitch are fasteners with a rectangular cross section which are compatible with the Bostitch Finish Bradders.

Joined with an adhesive coating that holds the brads together, while equipped with diameters less than coil and stick nails, these 18 gauge nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Pack of 5000
• Length: 15mm
• Diameter/gauge 18 GA
• Galvanised finish
• Manufacturer's part BT1315GA

This pack of 5000 BT Series galvanised mini brad nails 20mm from Bostitch are fasteners with a rectangular cross section which are compatible with the Bostitch Finish Bradders.

Joined with an adhesive coating that holds the brads together, while equipped with diameters less than coil and stick nails, these 18 gauge nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Pack of 5000
• Length: 20mm
• Diameter/gauge 18 GA
• Galvanised finish
• Manufacturer's part BT1320GA

This pack of 5000 BT Series galvanised mini brad nails 25mm from Bostitch are fasteners with a rectangular cross section which are compatible with the Bostitch Finish Bradders.

Joined with an adhesive coating that holds the brads together, while equipped with diameters less than coil and stick nails, these 18 gauge nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Pack of 5000
• Length: 25mm
• Diameter/gauge 18 GA
• Galvanised finish
• Manufacturer's part BT1325GA

This pack of 5000 BT Series galvanised mini brad nails 30mm from Bostitch are fasteners with a rectangular cross section which are compatible with the Bostitch Finish Bradders.

Joined with an adhesive coating that holds the brads together, while equipped with diameters less than coil and stick nails, these 18 gauge nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Pack of 5000
• Length: 30mm
• Diameter/gauge 18 GA
• Galvanised finish
• Manufacturer's part BT1330GA

This pack of 1000 galvanised 32mm brown brad nails from Bostitch have a rectangular cross section and are compatible with the Bostitch brad nailer. Equipped with diameters less than coil and stick nails, while manufactured using 18 gauge wire, these nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Length: 32mm
• Colour: Brown
• Pack of 1000
• Manufacturer's part BT1332B-1M

This pack of 1000 galvanised 35mm brown brad nails from Bostitch have a rectangular cross section and are compatible with the Bostitch brad nailer. Equipped with diameters less than coil and stick nails, while manufactured using 18 gauge wire, these nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Length: 35mm
• Colour: Brown
• Pack of 1000
• Manufacturer's part BT1335B-1M

This pack of 5000 BT Series galvanised mini brad nails 35mm from Bostitch are fasteners with a rectangular cross section which are compatible with the Bostitch Finish Bradders.

Joined with an adhesive coating that holds the brads together, while equipped with diameters less than coil and stick nails, these 18 gauge nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Pack of 5000
• Length: 35mm
• Diameter/gauge 18 GA
• Galvanised finish
• Manufacturer's part BT1335GA

This pack of 1000 galvanised 40mm brown brad nails from Bostitch have a rectangular cross section and are compatible with the Bostitch brad nailer. Equipped with diameters less than coil and stick nails, while manufactured using 18 gauge wire, these nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Length: 40mm
• Colour: Brown
• Pack of 1000
• Manufacturer's part BT1340B-1M

This pack of 5000 BT Series galvanised mini brad nails 40mm from Bostitch are fasteners with a rectangular cross section which are compatible with the Bostitch Finish Bradders.

Joined with an adhesive coating that holds the brads together, while equipped with diameters less than coil and stick nails, these 18 gauge nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Pack of 5000
• Length: 40mm
• Diameter/gauge 18 GA
• Galvanised finish
• Manufacturer's part BT1340GA

This pack of 1000 galvanised 45mm brown brad nails from Bostitch have a rectangular cross section and are compatible with the Bostitch brad nailer. Equipped with diameters less than coil and stick nails, while manufactured using 18 gauge wire, these nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Length: 45mm
• Colour: Brown
• Pack of 1000
• Manufacturer's part BT1345B-1M

This pack of 5000 BT Series galvanised mini brad nails 45mm from Bostitch are fasteners with a rectangular cross section which are compatible with the Bostitch Finish Bradders.

Joined with an adhesive coating that holds the brads together, while equipped with diameters less than coil and stick nails, these 18 gauge nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Pack of 5000
• Length: 45mm
• Diameter/gauge 18 GA
• Galvanised finish
• Manufacturer's part BT1345GA

This pack of 1000 galvanised 50mm brown brad nails from Bostitch have a rectangular cross section and are compatible with the Bostitch brad nailer. Equipped with diameters less than coil and stick nails, while manufactured using 18 gauge wire, these nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Length: 50mm
• Colour: Brown
• Pack of 1000
• Manufacturer's part BT1350B-1M

This pack of 5000 BT Series galvanised mini brad nails 50mm from Bostitch are fasteners with a rectangular cross section which are compatible with the Bostitch Finish Bradders.

Joined with an adhesive coating that holds the brads together, while equipped with diameters less than coil and stick nails, these 18 gauge nails are great for interior and exterior trim, plus cabinetry, furniture, joinery and crafts.

• Pack of 5000
• Length: 50mm
• Diameter/gauge 18 GA
• Galvanised finish
• Manufacturer's part BT1350GA

This 2-i-n1 RH and MCN 21° stick nailer 38-90mm nails from Bostitch not only performs as a round head framing nailer, but can also be adapted into a positive placement nailer - making it the ultimate 2-in-1 nailer tool!

Manufactured to a high standard with driving power boosted by 5%, the nailer's body has a wasted shape to improve sightline, along with a repositioned handle for excellent balance and comfort -

The F21PL-E drives plastic collated roundhead nails, with bright and G13 galvanisation to 50 microns, plus specially designed positive placement nails galvanised to 15 microns; the tool comes complete with two noses enabling a five second change between modes via the push button depth control button. Such fearues make this tool ideal for framing and first fix applications where good corrosion resistance is required to drive a nail through a preformed hole.

• Features 2 noses with quick-change mechanism
• Driving power: 1050 inch/lbs
• Magazine capacity: 50
• Operating pressure: 70-120 PSI, 5-8.25 BAR
• Weight: 3.7kg
• 133 x 517 x 355mm (W x L x H)
• Supplied with case
• Manufacturer's part F21PL-E

This 28° pneumatic wire weld stick nailer from Bostitch has been designed for heavy-duty construction framing and flooring applications, boasting a 5% increase in driving power together with a weight reduction.

The wasted body design gives a much improved sightline to the tool nose, while the handle has been lowered to improve balance and comfort in use. Its use of 28° wire collated nails keeps consumable costs to a minimum.

Additional features include the lightweight magnesium housing, no-mar-tip, push button depth control, dial-a-depth, serrated tip and sequential trip.

Compatible with WW Series fasteners featuring: 2.8-3.3mm diameter, 50-90mm length and 7.5mm head.

• Magazine capacity: 90
• Rubber comfort grip
• 133 x 508 x 355mm (W x L x H)
• Weight: 3.5kg
• Supplied with carry case
• Manufacturer's part F28WW-E

This 33° paper tape stick nailer from Bostitch utilises paper tape collated stick nails at 30-32° and features a short magazine for ease of use in tight spaces. The paper tape nails are compatible with pazlode (IM350) framer.

The powerful engine is capable of driving stick nails up to 90mm in length, while the lightweight magnesium body makes it comfortable to use for long periods. Additional features include: CE compliant sequential trip for safer working, a no-mar tip to prevent wood bruising, an adjustable exhaust to direct dust and air away and a dial-a-depth function. Ideal for sub-flooring, roof trusses, decking stud walls and timber framing.

• Magazine capacity: 75
• Uses PT fastner range
• Weight: 3.6kg
• 133 x 360 x 355mm (W x L x H)
• Manufacturer's part F33 PTSM

This pack of 1000 FLN Series galvanised flooring cleat nails 50mm from Bostitch have been designed with an "L" shape and are ideal for trouble-free construction, including the flooring industry. These durable nails have been manufactured with a galvanised finish, making them suitable for outdoor use, while also offering a superior grip. Compatible with the Bostitch flooring nailer.

• "L" shape for strong grip
• Galvanised finish
• Height: 50mm
• Manufacturer's part FLN-200

This pack of 3655 angled finish nails 32mm from Bostitch have been manufactured for the N62 FNK-2 finish power nailer, along with the N60FN and N59FNK models.

Designed with rectangular heads measuring the same width as the shank, although the breadth is greater than the shank, allowing their holding power to be enhanced; the pull through force is lower than for nails with larger, round or clipped heads. Such features make these nails ideal for partition walls, shop and bar fitting, light framing and timber construction.

• 15 gauge angled finish nail
• Length: 32mm
• Round head
• Ring shank
• Galvanised finish
• Quantity per box 3655
• Manufacturer's part FN1520

This pack of 3655 angled finish nails 38mm from Bostitch have been manufactured for the N62 FNK-2 finish power nailer, along with the N60FN and N59FNK models.

Designed with rectangular heads measuring the same width as the shank, although the breadth is greater than the shank, allowing their holding power to be enhanced; the pull through force is lower than for nails with larger, round or clipped heads. Such features make these nails ideal for partition walls, shop and bar fitting, light framing and timber construction.

• 15 gauge angled finish nail
• Length: 38mm
• Round head
• Ring shank
• Galvanised finish
• Quantity per box 3655
• Manufacturer's part FN1524

This pack of 3655 angled finish nails 44mm from Bostitch have been manufactured for the N62 FNK-2 finish power nailer, along with the N60FN and N59FNK models.

Designed with rectangular heads measuring the same width as the shank, although the breadth is greater than the shank, allowing their holding power to be enhanced; the pull through force is lower than for nails with larger, round or clipped heads. Such features make these nails ideal for partition walls, shop and bar fitting, light framing and timber construction.

• 15 gauge angled finish nail
• Length: 44mm
• Round head
• Ring shank
• Galvanised finish
• Quantity per box 3655
• Manufacturer's part FN1528

This pack of 3655 angled finish nails 50mm from Bostitch have been manufactured for the N62 FNK-2 finish power nailer, along with the N60FN and N59FNK models.

Designed with rectangular heads measuring the same width as the shank, although the breadth is greater than the shank, allowing their holding power to be enhanced; the pull through force is lower than for nails with larger, round or clipped heads. Such features make these nails ideal for partition walls, shop and bar fitting, light framing and timber construction.

• 15 gauge angled finish nail
• Length: 50mm
• Round head
• Ring shank
• Galvanised finish
• Quantity per box 3655
• Manufacturer's part FN1532

This pack of 3655 angled finish nails 57mm from Bostitch have been manufactured for the N62 FNK-2 finish power nailer, along with the N60FN and N59FNK models.

Designed with rectangular heads measuring the same width as the shank, although the breadth is greater than the shank, allowing their holding power to be enhanced; the pull through force is lower than for nails with larger, round or clipped heads. Such features make these nails ideal for partition walls, shop and bar fitting, light framing and timber construction.

• 15 gauge angled finish nail
• Length: 57mm
• Round head
• Ring shank
• Galvanised finish
• Quantity per box 3655
• Manufacturer's part FN1536

This 16GA finish nailer CT/ST 25-64mm from Bostitch has been designed with a lightweight magnesium construction body, no-nail lockout, rear exhaust and selectable trigger, making it an ideal pneumatic tool for the construction industry.

Additional features include: No-mar-tip, dial-a-depth, oil free engine, compact nose, rear loading and selectable trigger.

Compatible with 25-64mm nails and supplied with 1000 fasteners, plus heavy-duty carry case.

• Rubber comfort grip
• Magazine capacity: 110
• 16 gauge
• 86 x 302 x 289mm (W x L x H)
• Weight: 1.70kg
• Supplied with carry case
• Manufacturer's part FN1664-E

This pack of 3000 high carbon galvanised nails 20mm from Bostitch have been designed for the Bostitch concrete block nailer. Manufactured with high carbon zinc dichromate HCFN finish.

• 15 gauge high carbon nail
• Length: 20mm
• Galvanised finish
• Quantity per box 3000
• Manufacturer's part HCFN-20

This pack of 1500 high carbon galvanised nails 30mm from Bostitch have been designed for the Bostitch concrete block nailer. Manufactured with high carbon zinc dichromate HCFN finish.

• 15 gauge high carbon nail
• Length: 30mm
• Galvanised finish
• Quantity per box 1500
• Manufacturer's part HCFN-30

This pack of 1500 high carbon galvanised nails 40mm from Bostitch have been designed for the Bostitch concrete block nailer. Manufactured with high carbon zinc dichromate HCFN finish.

• 15 gauge high carbon nail
• Length: 40mm
• Galvanised finish
• Quantity per box 3655
• Manufacturer's part HCFN-40

This pack of 1500 high carbon galvanised nails 50mm from Bostitch have been designed for the Bostitch concrete block nailer. Manufactured with high carbon zinc dichromate HCFN finish.

• 15 gauge high carbon nail
• Length: 50mm
• Galvanised finish
• Quantity per box 3655
• Manufacturer's part HCFN-50

This strap shot metal connecting nailer 38mm from Bostitch has been designed to be very lightweight and simple to use, making it ideal in tight corners, joist hangers, roof trusses and metal connectors and other construction uses.

Equipped with a host of excellent features, including the exposed-tip design which positions the fastener directly into the connector plate's holes for faster and more accurate positioning than ever before. Additional features include: sequential trip trigger, adjustable exhaust, magnesium housing, serrated tip and tool lock-out.

This MCN150-E nail gun uses 3.75 x 38mm PT MCN galvanised nails.

• Rubber comfort grip
• Weight: 1.95kg
• 296 × 267 × 86mm (L x W x H)
• Magazine capacity 29
• Supplied with carry case
• Manufacturer's part MCN150-E