Sand and grind at perfect 45 and 90° angles with the Dremel Shaping Platform Attachment.

• Supplied complete with sanding mandrel, sanding band and grinding stone
• Dremel type 26150576JA

The 577 Detailer's Grip attaches to your Dremel power tool to give you even better control of your multitool when doing DIY, hobby and craft projects.

• Includes stencil template, engraving cutter and 2.4mm collet
• Dremel type 26150577JA

A 9.5mm Piloted Beading Bit for use with the Dremel 335 Plunge Router Attachment, 85-0419, or the Dremel 231 Shaper / Router Table, 85-0421.

• Shank diameter 3.2mm
• Dremel type 612

A 9.5mm Corner Rounding Bit for use with the Dremel 335 Plunge Router Attachment, 85-0419, or the Dremel 231 Shaper / Router Table, 85-0421.

• Shank diameter 3.2mm
• Dremel type 615

The Dremel 628 precision drill bit set contains a selection of 7 drill bits suitable for drilling into wood or soft metal.

As the shaft diameters vary, the set is suitable for Dremel tools equipped with a variable chuck such as the 4486 Dremel Multi Chuck.

• Drill diameters: 0.8, 1.2, 1.6, 2.0, 2.4, 2.8 and 3.2mm
• Maximum speed 35,000 rpm
• Housed in a handy plastic case
• Dremel type 628

Note: Not compatible with the Dremel 4200.

A 6.4mm V-Groove Bit for use with the Dremel 335 Plunge Router Attachment, 85-0419, or the Dremel 231 Shaper / Router Table, 85-0421.

• Shank diameter 3.2mm
• Dremel type 640

A 3.2mm Straight Bit for use with the Dremel 335 Plunge Router Attachment, 85-0419, or the Dremel 231 Shaper / Router Table, 85-0421.

• Shank diameter 3.2mm
• Dremel type 650

A 6.4mm Straight Bit for use with the Dremel 335 Plunge Router Attachment, 85-0419, or the Dremel 231 Shaper / Router Table, 85-0421.

• Shank diameter 3.2mm
• Dremel type 654

An 8mm Keyhole Router Bit for use with the Dremel 335 Plunge Router Attachment, 85-0419, or the Dremel 231 Shaper / Router Table, 85-0421.

• Shank diameter 3.2mm
• Dremel type 655

A 7-piece HSS router bit set for routing, inlaying and mortising in wood and other soft materials.

Ideal for use with the Dremel 335 plunge router attachment, 85-0419 or the Dremel 231 shaper / router table, 85-0421.

• 7-piece set contains 1 each of:
• 9.5mm, Dremel type 612
• 9.5mm, Dremel type 615
• 6.4mm, Dremel type 640
• 3.2mm, Dremel type 650
• 4.8mm, Dremel type 652
• 6.4mm, Dremel type 654
• 8.0mm, Dremel type 655
• Handy wooden storage box
• Common 3.2mm shank diameter
• Dremel type 660

The bits are also available separately. Click here for additional details.

These drill bits from Dremel are ideal for cutting 3.2mm diameter holes in glass.

• Shank diameter 3.2mm
• Working diameter 3.2mm
• Working length 5mm
• Accessory length 44mm
• Manufacturer's part 26150662JA

The Dremel 684 Cleaning / Polishing Set contains an assortment of 20 cleaning bits including wire brushes, buffing wheels and polishing brushes in a handy storage box.

• Removable accessory tray
• 3 dividers
• Dremel Quick Start leaflet
• Dremel type 26150684JA

The Dremel 688 Cutting Set contains an assortment of 68 cut-off wheels in a handy storage box.

• Removable accessory tray
• 3 dividers
• Dremel Quick Start leaflet
• Dremel type 26150688JA

These aluminium oxide grinding stones from Dremel are ideal for use on metals, castings, welded joints, rivets and rust. They can be used with a power tool for sharpening, deburring and grinding on most materials.

• Shank diameter 3.2mm
• Working diameter 9.5mm
• Accessory length 40mm
• Maximum speed 25,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150932JA

These aluminium oxide grinding stones from Dremel are ideal for use on metals, castings, welded joints, rivets and rust. They can be used with a power tool for sharpening, deburring and grinding on most materials.

• Shank diameter 3.2mm
• Working diameter 9.5mm
• Accessory length 40mm
• Maximum speed 25,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150952JA

These aluminium oxide grinding stones from Dremel are ideal for use on metals, castings, welded joints, rivets and rust. They can be used with a power tool for sharpening, deburring and grinding on most materials.

• Shank diameter 3.2mm
• Working diameter 6.4mm
• Accessory length 40mm
• Maximum speed 25,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150953JA

These aluminium oxide grinding stones from Dremel are ideal for use on metals, castings, welded joints, rivets and rust. They can be used with a power tool for sharpening, deburring and grinding on most materials.

• Shank diameter 3.2mm
• Working diameter 3.4mm
• Accessory length 39mm
• Maximum speed 25,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150997JA

Sharpen dull, slow-cutting saw chains with your Dremel Drill and the Dremel Chainsaw Sharpening Kit.

• Sharpens dull, slow-cutting chain saws
• Easily attaches to your Dremel tool
• Works with variety of different chain sizes
• Dremel type 26151453PA

The Dremel Flex Shaft Tool Holder holds your Dremel Drill above your workbench, ready for use, but without getting in the way of the work. It is ideal for drills fitted with the Dremel Flexshaft attachment.

• Suspends Dremel tool above workbench
• For use with the Flex Shaft attachment
• Clamps to workbenches up to 50mm thick
• Adjusts in height from 300 to 1070mm
• Bit storage rack in base
• Dremel type 2615222232
• Power tool and Flex Shaft not included, please see separate entries

The versatile Dremel Multivise can be used as a stationary bench vice, stand-alone clamp and as a holder for your Dremel Drill.

• Clamps to any workbench, table or countertop
• Rotates 360° and tilts 50°
• Stabilise oversize objects/protect delicate pieces from damage
• Makes removal of objects from jaws fast
• Resists twisting and bowing
• Removable soft pads
• Tool holder adaptor
• Dremel type 26152500JA

These silicon carbide grinding stones are designed for use with the Dremel Multitool for grinding and smoothing stone, glass, ceramics, porcelain and non-ferrous metals.

• Working diameter 3.2mm
• Shank diameter 3.2mm
• Length 39mm
• Maximum RPM 25,000
• Supplied in packs of 3
• Manufacturer's part 26153322JA

Collets offer the most precise way to hold an accessory in a Dremel multitool. The Dremel 4485 Collet Kit is an assortment of the 4 different available collets (0.8 / 1.6 / 2.4 & 3.2mm diameter) and includes a collet nut.

• Precise hold
• Sizes: 0.8 / 1.6 / 2.4 & 3.2mm diameter
• Sizes can be recognised by the number of rings around the shank
• Includes collet nut
• Dremel type 4485

The Dremel 4486 Multi Chuck allows you to quickly and easily change accessories on your Dremel multitool without using collets. It accepts drills and other accessories with diameters between 0.4 and 3.4mm.

• Quickly and easily change accessories
• No need to change collets
• Chuck capacity 0.4 to 3.4mm diameter
• Dremel Type 4486

These silicon carbide grinding stones are designed for use with the Dremel Multitool for grinding and smoothing stone, glass, ceramics, porcelain and non-ferrous metals.

• Working diameter 4.8mm
• Shank diameter 3.2mm
• Length 40mm
• Maximum RPM 25,000
• Supplied in packs of 3
• Manufacturer's part 26154922JA

These silicon carbide grinding stones are designed for use with the Dremel Multitool for grinding and smoothing stone, glass, ceramics, porcelain and non-ferrous metals.

• Working diameter 19.8mm
• Shank diameter 3.2mm
• Length 40mm
• Maximum RPM 20,000
• Supplied singly
• Manufacturer's part 2615542232

These silicon carbide grinding stones are designed for use with the Dremel Multitool for grinding and smoothing stone, glass, ceramics, porcelain and non-ferrous metals.

• Working diameter 10.3mm
• Shank diameter 3.2mm
• Length 39mm
• Maximum RPM 20,000
• Supplied in packs of 3
• Manufacturer's part 26155602JA

This diamond wheel point from Dremel can be used with a power tool for finely detailed cutting, engraving, carving and finishing on wood, ceramics, glass, hardened steel, semi-precious stones and a variety of other hard materials. Bits are covered with diamond particles.

• Working diameter 2mm
• Shank diameter 3.2mm
• Accessory length 45mm
• Maximum speed 25,000rpm
• Supplied in packs of 2
• Manufacturer's part 26157103JA

This diamond wheel point from Dremel can be used with a power tool for finely detailed cutting, engraving, carving and finishing on wood, ceramics, glass, hardened steel, semi-precious stones and a variety of other hard materials. Bits are covered with diamond particles.

• Working diameter 4.4mm
• Shank diameter 3.2mm
• Accessory length 46mm
• Maximum speed 25,000rpm
• Supplied in packs of 2
• Manufacturer's part 26157105JA

This diamond wheel point from Dremel can be used with a power tool for finely detailed cutting, engraving, carving and finishing on wood, ceramics, glass, hardened steel, semi-precious stones and a variety of other hard materials. Bits are covered with diamond particles.

• Working diameter 2.4mm
• Shank diameter 3.2mm
• Accessory length 46mm
• Maximum speed 25,000rpm
• Supplied in packs of 2
• Manufacturer's part 26157122JA

This diamond wheel point from Dremel can be used with a power tool for finely detailed cutting, engraving, carving and finishing on wood, ceramics, glass, hardened steel, semi-precious stones and a variety of other hard materials. Bits are covered with diamond particles.

• Working diameter 2mm
• Shank diameter 3.2mm
• Accessory length 46mm
• Maximum speed 25,000rpm
• Supplied in packs of 2
• Manufacturer's part 26157134JA

This diamond wheel point from Dremel can be used with a power tool for finely detailed cutting, engraving, carving and finishing on wood, ceramics, glass, hardened steel, semi-precious stones and a variety of other hard materials. Bits are covered with diamond particles.

• Working diameter 2.4mm
• Shank diameter 3.2mm
• Accessory length 46mm
• Maximum speed 25,000rpm
• Supplied in packs of 2
• Manufacturer's part 26157144JA

These aluminium oxide grinding stones from Dremel are ideal for use on metals, castings, welded joints, rivets and rust. They can be used with a power tool for sharpening, deburring and grinding on most materials.

• Shank diameter 3.2mm
• Working diameter 4.8mm
• Accessory length 38mm
• Maximum speed 25,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150953JA

These aluminium oxide grinding stones from Dremel are ideal for use on metals, castings, welded joints, rivets and rust. They can be used with a power tool for sharpening, deburring and grinding on most materials.

• Shank diameter 3.2mm
• Working diameter 15.9mm
• Accessory length 38mm
• Maximum speed 20,000rpm
• Supplied in packs of 2
• Manufacturer's part 26158193JA

These aluminium oxide grinding stones from Dremel are ideal for use on metals, castings, welded joints, rivets and rust. They can be used with a power tool for sharpening, deburring and grinding on most materials.

• Shank diameter 3.2mm
• Working diameter 25.4mm
• Accessory length 40mm
• Maximum speed 20,000rpm
• Supplied singly
• Manufacturer's part 2615821532

These tungsten carbide cutters from Dremel are ideal for shaping, smoothing and removing unwanted material on a variety of substances. They can be used on hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics, hardwoods and many other hard materials.

• Square-shaped tip
• Working diameter 3.2mm
• Shank diameter 3.2mm
• Length 39mm
• Maximum RPM 30,000
• Manufacturer's part 2615990132

These tungsten carbide cutters from Dremel are ideal for shaping, smoothing and removing unwanted material on a variety of substances. They can be used on hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics, hardwoods and many other hard materials.

• Pointed tip
• Working diameter 3.2mm
• Shank diameter 3.2mm
• Length 39mm
• Maximum RPM 30,000
• Manufacturer's part 2615990332

These tungsten carbide cutters from Dremel are ideal for shaping, smoothing and removing unwanted material on a variety of substances. They can be used on hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics, hardwoods and many other hard materials.

• Ball-shaped tip
• Working diameter 3.2mm
• Shank diameter 3.2mm
• Length 38mm
• Maximum RPM 30,000
• Manufacturer's part 2615990532

These tungsten carbide cutters from Dremel are ideal for shaping, smoothing and removing unwanted material on a variety of substances. They can be used on hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics, hardwoods and many other hard materials.

• Spear-shaped tip
• Working diameter 3.2mm
• Shank diameter 3.2mm
• Length 39mm
• Maximum RPM 30,000
• Manufacturer's part 2615991032

These tungsten carbide cutters from Dremel are ideal for shaping, smoothing and removing unwanted material on a variety of substances. They can be used on hardened steel, stainless steel, cast iron, non-ferrous metals, fired ceramics, plastics, hardwoods and many other hard materials.

• Egg-shaped tip
• Working diameter 3.2mm
• Shank diameter 3.2mm
• Length 39mm
• Maximum RPM 30,000
• Manufacturer's part 2615991132

Carbide Engraving Points for use with the Dremel Engraver 290, (85-0469).

• Carbide Engraving Points
• For use with the Dremel Engraver 290, (85-0469)
• Supplied in packs of 3

A Diamond Engraving Point for use with the Dremel Engraver 290, (85-0469). The Diamond Engraving Point 9929 has a longer lifespan than the Carbide Point and is for use on harder materials such as glass.

• Diamond Engraving Point
• For use with the Dremel Engraver 290, (85-0469)
• The Diamond Engraving Point 9929 has a longer lifespan than the Carbide Point and is ideal for use on harder materials such as glass
• Supplied singly

These tungsten carbide cutters from Dremel have fast-cutting sharp teeth for greater material removal. They are ideal for use on a variety of materials including fibreglass, wood, plastic, rubber, laminates, particle board, soft metals and ceramic tiles.

• Spear-shaped tip
• Shank diameter 3.2mm
• Working diameter 6.4mm
• Length 45mm
• Maximum RPM 35,000
• Manufacturer's part 2615993132

These tungsten carbide cutters from Dremel have fast-cutting sharp teeth for greater material removal. They are ideal for use on a variety of materials including fibreglass, wood, plastic, rubber, laminates, particle board, soft metals and ceramic tiles.

• Cone-shaped tip
• Shank diameter 3.2mm
• Working diameter 7.8mm
• Length 40mm
• Maximum RPM 35,000
• Manufacturer's part 2615993432

These tungsten carbide cutters from Dremel have fast-cutting sharp teeth for greater material removal. They are ideal for use on a variety of materials including fibreglass, wood, plastic, rubber, laminates, particle board, soft metals and ceramic tiles.

• Wheel-shaped tip
• Shank diameter 3.2mm
• Working diameter 19mm
• Length 45mm
• Maximum RPM 35,000
• Manufacturer's part 2615993632

Saw blades for use with the Dremel MS20 Moto-Saw. The blades are ideal for straight and large diameter curved cuts in wooden and plastic materials. They have 6 teeth per centimetre ensuring a good balance between speed and precision.

• Supplied in Packs of 5
• Dremel type MS51

Saw blades for use with the Dremel MS20 Moto-Saw. The blades are ideal for detailed cuts in wooden materials and have 7 teeth per centimetre to ensure the finest cutting results.

• Supplied in Packs of 5
• Dremel type MS52

Saw blades for use with the Dremel MS20 Moto-Saw. The blades are ideal for cutting soft sheet metal and have 10 teeth per centimetre ensuring excellent cuts.

• Supplied in Packs of 5
• Dremel type MS53

This mandrel is designed for use with cutting wheels from the EZ SpeedClic range of quick-change rotary tool accessories from Dremel.

• Quick and easy to use
• Shank diameter 3.2mm
• Length 38mm
• Maximum speed 35,000rpm
• Manufacturer's part 2615S402JB

This starter set includes the EZ SpeedClic mandrel and two fibreglass reinforced metal cutting wheels and is part of a range of quick-change rotary tool accessories from Dremel.

• Quick and easy to use
• Shank diameter 3.2mm
• Working diameter 38mm
• Maximum working depth 14mm
• Maximum speed 35,000rpm
• Manufacturer's part 2615S406JC

This set includes a sanding mandrel and 2 sanding bands from the EZ SpeedClic range of quick-change rotary tool accessories from Dremel. These bands are ideal for the quick removal of material. With the EZ SpeedClic mandrel changing the sanding band is easy - just lift, place and press into place.

• Quick and easy to use - no key required
• Shank diameter 3.2mm
• Working diameter 13mm
• Length 36mm
• Manufacturer's part 2615S407JA

Set includes: 1 EZ SpeedClic sanding mandrel; 1 sanding band 60 grit, 1 sanding band 120 grit.