These high speed cutters from Dremel can be used with power tools for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastic and wood.

• Small cylindrical head
• Working diameter 2mm
• Shank diameter 3.2mm
• Accessory length 39mm
• Maximum speed 30,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150193JA

These high speed cutters from Dremel can be used with power tools for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastic and wood.

• Cylindrical head
• Working diameter 3.2mm
• Shank diameter 3.2mm
• Accessory length 39mm
• Maximum speed 30,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150194JA

These high speed cutters from Dremel can be used with power tools for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastic and wood.

• Square head
• Working diameter 5.6mm
• Shank diameter 3.2mm
• Accessory length 39mm
• Maximum speed 30,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150196JA

These high speed cutters from Dremel can be used with power tools for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastic and wood.

• Disc-shaped head
• Working diameter 9.5mm
• Shank diameter 3.2mm
• Accessory length 39mm
• Maximum speed 30,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150199JA

The Drill Stand 220 (Workstation) from Dremel provides the ideal tool for stationary working with your Dremel tool, allowing you to drill vertically or at an angle that is adjustable in increments of 15 degrees. The Dremel Workstation will also hold the tool horizontally to allow easy polishing and sanding. The integrated, telescopic tool stand holds tools with the Dremel 225 Flex Shaft.

The Dremel Workstation has on-board accessory storage allowing you to ensure all the tools you need are to hand, and the cord management system keeps the cord safely stowed away from any moving parts and cutting edges.

Depth markings and base markings in both metric and inches provide consistent depth and placement adjustment so your projects turn out perfectly every time.

Suitable for professionals, DIY projects and hobbyists, the Dremel Workstation will be an invaluable tool for all your project needs.

• Combined Drill Press and Tool Holder
• The perfect solution for stationary working with your Dremel
• Drill vertically or in an angle, adjustable in increments of 15°
• Holds tool horizontally for polishing and sanding
• Integrated, telescoping tool stand holds tool with Flex Shaft (225)
• On-board accessory storage
• Cord management keeps cord safely stowed
• Depth markings for consistent depth adjustment
• Base markings (metric and inches)
• Dimensions: 152 x 152 x 305mm
• Weight 454g
• Dremel Workstation 220

This item is also available in a Money-Saving Bundle with the Dremel 8220-5/65 12V Multi Tool Platinum Kit and a FREE Anvil AV-AC400A, 400-piece accessory set.

Which tool fits which attachments? Click HERE to find out.

The Dremel Book of Inspiration also offers 50 ideas for hands-on creative projects at different levels of difficulty and limitless opportunities for your own projects using Dremel's Versatile Tool Systems.

The Dremel Flexible Shaft attaches to suitable Dremel Drills to provide precise control for detailed work and to allow access to confined spaces where a smaller drill body is required.

• For precise, detailed work or hard to reach places
• Comfort Grip Handpiece
• Integrated shaft lock button
• Length 1070mm
• 127mm bend radius
• Takes standard drill bits up to 4mm
• Quick connect attaches Dremel tool in seconds
• Contents: 1x Flexible Shaft, 1x Drive Cap, 1x quick start guide/ manual
• Dremel type 26150225JA

Turn your Dremel Drill into a plunge router with this handy attachment. Fitting is easy and quick and your drill can be removed again for normal use in seconds.

• Plunge-lock in handle
• Two depth stops for quick, consistent adjustment of depth
• Edge guide and circle guide to rout straight lines and perfect circles
• Guide brushing set-letter/pattern template routing
• Dremel type 26150335JA

These mandrels can be used to mount various accessories used with the Dremel Multitool, such as polishing wheels and cut-off wheels.

• Shank diameter 3.2mm
• Length 39mm
• Maximum speed 35,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150401JA

These mandrels can be used to mount various accessories used with the Dremel Multitool, such as polishing wheels and cut-off wheels.

• Shank diameter 3.2mm
• Length 35mm
• Maximum speed 35,000rpm
• Supplied in packs of 4
• Manufacturer's part 26150402JA

These bristle brushes are ideal for use with Dremel Multitools for deburring, cleaning and polishing silverware, jewellery and precious metals.

• Working diameter 19mm
• Shank diameter 3.2mm
• Length 44mm
• Maximum speed 15,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150403JA

These bristle brushes are ideal for use with Dremel Multitools for deburring, cleaning and polishing silverware, jewellery and precious metals.

• Working diameter 13mm
• Shank diameter 3.2mm
• Length 41mm
• Maximum speed 15,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150404JA

These bristle brushes are ideal for use with Dremel Multitools for deburring, cleaning and polishing silverware, jewellery and precious metals.

• Working diameter 3.2mm
• Shank diameter 3.2mm
• Length 47mm
• Maximum speed 15,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150405JA

These coarse sanding bands from Dremel are ideal for shaping and smoothing wood and fibreglass and for removing rust from metal surfaces. They can also be used on rubber surfaces.

• Working diameter 13mm
• Shank diameter 3.2mm
• Grit 60
• Maximum speed 35,000rpm
• Supplied in packs of 6
• Manufacturer's part 2615040832

These thick emery cut-off wheels are ideal for use with the Dremel Multitool for slicing and cutting metal, wood and plastic. With these wheels it is easy to cut or slot bolts, screws and sheet metal.

• Shank diameter 3.2mm
• Working diameter 24mm
• Maximum speed 35,000rpm
• Supplied in packs of 36
• Manufacturer's part 2615040932

Note: Wheel cuts only along its edge. Do not attempt to sand or cut curved holes.

These felt polishing wheels from Dremel are ideal for use with most metals and plastics. Using these wheels with Dremel polishing compound produces a highly lustrous polish.

• Shank diameter 3.2mm
• Working diameter 13mm
• Maximum speed 20,000rpm
• Supplied in packs of 6
• Manufacturer's part 2615041432

These heavy-duty thick emery cut-off wheels are ideal for use with the Dremel Multitool for slicing and cutting metal, wood and plastic. With these wheels it is easy to cut or slot bolts, screws and sheet metal.

• Shank diameter 3.2mm
• Working diameter 24mm
• Maximum working depth 10mm
• Maximum speed 35,000rpm
• Supplied in packs of 20
• Manufacturer's part 2615042032

Note: Wheel cuts only along its edge. Do not attempt to sand or cut curved holes.

This polishing compound from Dremel can be used with most felt or cloth polishing wheels to produce a high lustre on most metals and plastics.

• Manufacturer's part 2615042132

These felt polishing points from Dremel are ideal for use with most metals and plastics. Using these wheels with Dremel polishing compound produces a highly lustrous polish.

• Shank diameter 3.2mm
• Working diameter 10mm
• Maximum speed 20,000rpm
• Supplied in packs of 4
• Manufacturer's part 26150422JA

These emery polishing wheels from Dremel are ideal for use with most metals and plastics. Using these wheels with Dremel polishing compound produces a highly lustrous polish.

• Shank diameter 3.2mm
• Working diameter 22.5mm
• Maximum speed 20,000rpm
• Supplied in packs of 4
• Manufacturer's part 26150425JA

These fibreglass reinforced cut-off wheels are ideal for use with the Dremel Multitool for slicing and cutting metal, wood and plastic. With these wheels it is easy to cut or slot bolts, screws and sheet metal.

• Shank diameter 3.2mm
• Working diameter 32mm
• Maximum working depth 14mm
• Maximum speed 35,000rpm
• Supplied in packs of 5
• Manufacturer's part 2615042632

Note: Wheel cuts only along its edge. Do not attempt to sand or cut curved holes.

These versatile wheel-shaped carbon steel brushes from Dremel are ideal for use with a power tool to remove rust and other corrosion, to polish metal surfaces and to deburr or clean electrical components.

• Working diameter 19mm
• Shank diameter 3.2mm
• Accessory length 44mm
• Maximum speed 15,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150428JA

These felt polishing wheels from Dremel are ideal for use with most metals and plastics. Using these wheels with Dremel polishing compound produces a highly lustrous polish.

• Shank diameter 3.2mm
• Working diameter 26mm
• Maximum speed 20,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150429JA

These coarse sanding bands from Dremel are ideal for shaping and smoothing wood and fibreglass and for removing rust from metal surfaces. They can also be used on rubber surfaces. This product also includes a mandrel.

• Working diameter 6.4mm
• Shank diameter 3.2mm
• Grit 60
• Maximum speed 35,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150430JA

These coarse sanding bands from Dremel are ideal for shaping and smoothing wood and fibreglass and for removing rust from metal surfaces. They can also be used on rubber surfaces.

• Working diameter 6.4mm
• Shank diameter 3.2mm
• Grit 60
• Maximum speed 35,000rpm
• Supplied in packs of 6
• Manufacturer's part 2615043132

These fine sanding bands from Dremel are ideal for shaping and smoothing wood and fibreglass and for removing rust from metal surfaces. They can also be used on rubber surfaces.

• Working diameter 13mm
• Shank diameter 3.2mm
• Grit 120
• Maximum speed 35,000rpm
• Supplied in packs of 6
• Manufacturer's part 2615043232

These fine sanding bands from Dremel are ideal for shaping and smoothing wood and fibreglass and for removing rust from metal surfaces. They can also be used on rubber surfaces

• Working diameter 6.4mm
• Shank diameter 3.2mm
• Grit 60
• Maximum speed 35,000rpm
• Supplied in packs of 6
• Manufacturer's part 2615043832

These versatile cup-shaped carbon steel brushes from Dremel are ideal for use with a power tool to remove rust and other corrosion, to polish metal surfaces and to deburr or clean electrical components.

• Working diameter 13mm
• Shank diameter 3.2mm
• Accessory length 50mm
• Maximum speed 15,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150442JA

These versatile end-shaped carbon steel brushes from Dremel are ideal for use with a power tool to remove rust and other corrosion, to polish metal surfaces and to deburr or clean electrical components.

• Working diameter 3.2mm
• Shank diameter 3.2mm
• Accessory length 48mm
• Maximum speed 15,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150443JA

These grinding stones from Dremel are precision ground and are ideal for quick, easy sharpening of chainsaw blades.

• Working diameter 4mm
• Shank diameter 3.2mm
• Accessory length 45mm
• Maximum speed 30,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150453JA

These grinding stones from Dremel are precision ground and are ideal for quick, easy sharpening of chainsaw blades.

• Working diameter 4.8mm
• Shank diameter 3.2mm
• Accessory length 50mm
• Maximum speed 30,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150454JA

These grinding stones from Dremel are precision ground and are ideal for quick, easy sharpening of chainsaw blades.

• Working diameter 5.6mm
• Shank diameter 3.2mm
• Accessory length 50mm
• Maximum speed 30,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150455JA

These grinding stones from Dremel are precision ground and are ideal for quick, easy sharpening of chainsaw blades.

• Working diameter 4.5mm
• Shank diameter 3.2mm
• Accessory length 49mm
• Maximum speed 30,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150457JA

These flap wheels from Dremel are perfect for sanding flat or contoured surfaces on a variety of materials including metal, wood, plastic and rubber.

• Shank diameter 3.2mm
• Working diameter 28.6mm
• Working height 9.5mm
• Length 50mm
• Grit 80
• Maximum speed 35,000rpm
• Manufacturer's part 2615050232

These flap wheels from Dremel are perfect for sanding flat or contoured surfaces on a variety of materials including metal, wood, plastic and rubber.

• Shank diameter 3.2mm
• Working diameter 28.6mm
• Working height 4.8mm
• Length 50mm
• Grit 80
• Maximum speed 35,000rpm
• Manufacturer's part 2615050432

This abrasive point can be used with the Dremel Multitool for finishing work and deburring and for removing paint and rust without removing any of the base material.

• Shank diameter 3.2mm
• Working diameter 13mm
• Length 37mm
• Maximum rpm 20,000
• Manufacturer's part 261501632

This impregnated polishing wheel from Dremel can be used to polish various surfaces including steel, aluminium, brass, silver, gold and hard plastic - without the need for a polishing compound. The wheel is impregnated with a silicon carbide abrasive and cooling lubricant, so additional compound is not required.

• Working diameter 13.2mm
• Shank diameter 3.2mm
• Accessory length 54mm
• Maximum speed 20,000rpm
• Manufacturer's part 2615052065

These wheel-shaped stainless steel brushes from Dremel can be used with a power tool to clean corrosive-resistant materials such as pewter, aluminium and stainless steel.

• Ideal for use on corroded battery terminals
• Working diameter 19mm
• Shank diameter 3.2mm
• Accessory length 44mm
• Maximum speed 15,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150530JA

These cup-shaped stainless steel brushes from Dremel can be used with a power tool to clean corrosive-resistant materials such as pewter, aluminium and stainless steel.

• Ideal for use on corroded battery terminals
• Working diameter 13mm
• Shank diameter 3.2mm
• Accessory length 51mm
• Maximum speed 15,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150531JA

These end-shaped stainless steel brushes from Dremel can be used with a power tool to clean corrosive-resistant materials such as pewter, aluminium and stainless steel.

• Ideal for use on corroded battery terminals
• Working diameter 3.2mm
• Shank diameter 3.2mm
• Accessory length 48mm
• Maximum speed 15,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150532JA

These wheel-shaped brass brushes from Dremel can be used with a power tool to clean soft metals such as gold, copper and brass. These brushes are softer than steel so will not leave scratches. They are also non-sparking.

• Working diameter 19mm
• Shank diameter 3.2mm
• Accessory length 44mm
• Maximum speed 15,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150535JA

These cup-shaped brass brushes from Dremel can be used with a power tool to clean soft metals such as gold, copper and brass. These brushes are softer than steel so will not leave scratches. They are also non-sparking.

• Working diameter 13mm
• Shank diameter 3.2mm
• Accessory length 51mm
• Maximum speed 15,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150536JA

These end-shaped brass brushes from Dremel can be used with a power tool to clean soft metals such as gold, copper and brass. These brushes are softer than steel so will not leave scratches. They are also non-sparking.

• Working diameter 3.2mm
• Shank diameter 3.2mm
• Accessory length 48mm
• Maximum speed 15,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150537JA

This high quality abrasive brush from Dremel is perfect for deburring, cleaning, rust and corrosion removal and can be used at a higher speed than most other similar brushes.

• Shank diameter 3.2mm
• Working diameter 26mm
• Length 45mm
• Maximum speed 20,000rpm
• Manufacturer's part 26150538JA

These cut-off wheels are ideal for use with the Dremel Multitool for slicing and cutting metal, wood and plastic. With these wheels it is easy to cut or slot bolts, screws and sheet metal.

• Shank diameter 3.2mm
• Working diameter 32mm
• Maximum working depth 14mm
• Maximum speed 35,000rpm
• Supplied in packs of 5
• Manufacturer's part 2615054032

Note: Wheel cuts only along its edge. Do not attempt to sand or cut curved holes.

This cutting/shaping wheel from Dremel is the perfect tool for anyone involved in working with wood. The special design of the wheel enables you to cut, groove and shape both hardwoods and softwood. Thanks to its carbide coating, this wheel is especially durable.

• Shank diameter 3.2mm
• Working diameter 25.4mm
• Maximum working depth 9mm
• Maximum speed 35,000rpm
• Manufacturer's part 2615054265

This precision saw blade can be used with the Dremel Mini Saw Attachment to make fine, clean and straight cuts in all sorts of wood. The rip/cross-cut blade is perfect for cutting laminate and wood flooring and thin wood plates. Made from carbon steel, this blade has 48 offset teeth which guarantee precise cuts up to 6.35mm.

• Shank diameter 3.2mm
• Working diameter 31.8mm
• Maximum working depth 6.4mm
• Maximum speed 35,000rpm
• Supplied in packs of 2
• Manufacturer's part 26150546JB

These multipurpose spiral cutting bits from Dremel can be used with a power drill on wood, plastic, fibreglass and vinyl.

• Working diameter 3.2mm
• Shank diameter 3.2mm
• Accessory length 65mm
• Maximum speed 35,000rpm
• Supplied in packs of 3
• Manufacturer's part 26150561JA

A spare or replacement spiral cutting bit for use with the Dremel 566 Wall Tile Cutting Kit, 85-0426.

• Cuts ceramic wall tiles, cement board and plaster
• Dremel type 562

Note: Not suitable for use on floor tiles.

The Dremel 566 Ceramic Tile Cutting Kit attaches easily to your Dremel Drill and holds it upright to ensure perfectly vertical cutting of ceramic wall tiles.

• Controlled cutting of ceramic wall tiles
• Easily attaches to your Dremel tool
• Supplied complete with cutting bit
• Spare / replacement cutting bits, type 562, available separately
• Dremel type 566 / 2615056632

These grout removal bits from Dremel are designed specifically for use with power tools to clean wall and floor grout and to remove grout in order to replace broken tiles.

• Working diameter 1.6mm
• Shank diameter 3.2mm
• Working length 6mm
• Accessory length 58mm
• Maximum speed 20,000rpm
• Manufacturer's part 2615056932