Bakers Fluid No.3 is a liquid flux specially formulated for soldering and tinning of tinned materials, copper and brass in many industrial applications. The flux is water-based, containing zinc chloride and other salts, which provide an extremely effective fluxing reaction at soldering temperatures.

The flux can be applied by brushing for most applications and is the most convenient method of controlling where the flux is placed. Alternatively, Bakers No.3 flux can be sprayed, or the work-piece can be fully or partially immersed in the flux prior to soldering. When heat is introduced the flux will begin to work effectively so that when the solder is applied, the joint can be formed.

Bakers No.3 is corrosive and should normally be removed as soon as possible after the joint has cooled. This can easily be achieved by washing with water, preferably warm.

• Ideal when soldering brass and copper
• Easy to apply
• Fast acting
• Economical in use
• Easy to clean off
• Ensures sound strong joints
• Supplied in a 125ml bottle

Bakers Fluid No.3 is a liquid flux specially formulated for soldering and tinning of tinned materials, copper and brass in many industrial applications. The flux is water-based, containing zinc chloride and other salts, which provide an extremely effective fluxing reaction at soldering temperatures.

The flux can be applied by brushing for most applications and is the most convenient method of controlling where the flux is placed. Alternatively, Bakers No.3 flux can be sprayed, or the work-piece can be fully or partially immersed in the flux prior to soldering. When heat is introduced the flux will begin to work effectively so that when the solder is applied, the joint can be formed.

Bakers No.3 is corrosive and should normally be removed as soon as possible after the joint has cooled. This can easily be achieved by washing with water, preferably warm.

• Ideal when soldering brass and copper
• Easy to apply
• Fast acting
• Economical in use
• Easy to clean off
• Ensures sound strong joints
• Supplied in a 250ml bottle

Edsyn Fluxi FL 110 is a high-quality flux for all types of soldering, but is particularly suited to use with SMD components. The flux can be applied selectively and precisely on the points to be soldered using the brush in the lid of the bottle. Use of the flexible brush helps to prevent damage to sensitive components and parts.

Laboratory tests have confirmed that, in general and with careful dosing, corrosive residues do not remain on the circuit board. Edsyn FL 110 flux is ideal for acute emergencies and repairs in lead-free applications, and should be part of any emergency repair kit.

• Easy to use
• Flexible brush protects components
• Ideally suited to fine pitch and SMD applications
• Faultless soldering results when using hot air or soldering iron
• Facilitates quick repairs
• Supplied in a 30ml bottle

An effective and reliable flux paste which simplifies soldering and lead jointing.Also suitable for lead-free and lead containing solder alloys.Quick and clean to use.UKWBF listed and approved by British Gas and WRAS.

Size: 450g.

A smooth paste which has been developed for use when installing or repairing pipework for water, heating and gas services etc.Water soluble, this flux is manufactured in line with the recommendations of MARC, offering good penetration of surface oxide with no pre-cleaning necessary.

Size: 350g.

A smooth paste which has been developed for use when installing or repairing pipework for water, heating and gas services etc.Water soluble, this flux is manufactured in line with the recommendations of MARC, offering good penetration of surface oxide with no pre-cleaning necessary.

Size: 100g.

Convenient and economical to use, applied easily by brush, swab or spray, to cold surfaces and then heated to melt the solder and make the joints. Only a thin coat is needed and, as the solder and flux are both applied at once, it saves time.

Used in a myriad of industrial jointing applications and a firm favourite with modellers, Fryolux is a uniform mixture of finely powdered tin/lead solder and zinc chloride activated flux. It has a creamy consistency and is reported to be ideal for pre-tinning, solder coating and soft solder assembly.

Size: 125g.

A PCB flux-based soldering varnish from Kontact-Chemie, suitable for the preparation of printed circuit boards prior to soldering.

• Reliably prevents oxidation of boards
• Suited to both production and service environments
• Apply immediately after etching of boards to ensure a smooth flow of solder
• Eliminates the possibility of cold soldering joints
• Complies with DIN8511 FSW31
• Supplied in 200ml ozone safe aerosol

High quality flux 7.5g from Lothonig is ideal for exceptionally clean, reliable soldering without damage to materials.

The use of flux paste can accelerate the soldering process, while the flux can also be used with metals that are difficult to solder (brass, steel, "Konstantan") and oxidised parts.

• Suitable for increased soldering temperature
• Avoids corrosion
• Content: 7g
• Flux residues remain neutral
• Prevents corrosion in measuring instruments
• Manufacturer's part 811114-89

LA-CO Regular Soldering Flux Paste is a non-acid, non-toxic soldering flux paste that cleans as you solder.

• Safe in use
• Cost-saving
• Helps to produce reliable joints
• WRAS (Water Regulations Advisory Scheme) approved
• Suitable for use with copper, brass, galvanized iron, lead, zinc, tin, silver, nickel, mild steel, terne plate (tin-plated iron or steel) and malleable iron
• Supplied in a 60g tub

LA-CO Regular Soldering Flux Paste is a non-acid, non-toxic soldering flux paste that cleans as you solder.

• Safe in use
• Cost-saving
• Helps to produce reliable joints
• WRAS (Water Regulations Advisory Scheme) approved
• Suitable for use with copper, brass, galvanized iron, lead, zinc, tin, silver, nickel, mild steel, terne plate (tin-plated iron or steel) and malleable iron
• Supplied in a 125g tub

LA-CO Regular Soldering Flux Paste is a non-acid, non-toxic soldering flux paste that cleans as you solder.

• Safe in use
• Cost-saving
• Helps to produce reliable joints
• WRAS (Water Regulations Advisory Scheme) approved
• Suitable for use with copper, brass, galvanized iron, lead, zinc, tin, silver, nickel, mild steel, terne plate (tin-plated iron or steel) and malleable iron
• Supplied in a 475g tub

LA-CO Regular Soldering Flux Paste is a non-acid, non-toxic soldering flux paste that cleans as you solder.

• Safe in use
• Cost-saving
• Helps to produce reliable joints
• WRAS (Water Regulations Advisory Scheme) approved
• Suitable for use with copper, brass, galvanized iron, lead, zinc, tin, silver, nickel, mild steel, terne plate (tin-plated iron or steel) and malleable iron
• Supplied in a 125g tub with a brush in the lid

The Qualitek No Clean Rework Flux Wand Pen contains a no-clean flux for use when removing and replacing surface mount components. The pen allows precise application of the flux on the area to be reworked.

• Mild formulation
• No-clean
• Non-corrosive and non-conductive
• 10ml marker pen dispenser

This brazing paste from Rothenberger is ideal for use with silver-containing brazing solder and all base materials made from steel, copper and copper alloys, brass and red bronze.

• Contents 160g
• Effective temperature range 500 to 800°C
• Flux residues must be carefully removed
• Manufacturer's part 035610E

Flux paste initially adheres components in place, it is then heated, melting the paste and forming a mechanical, as well as an electrical, connection.

Liquid flux is a key component to soldering because it removes oxidation that prevents solder from bonding to metals. Soldering even freshly cleaned metals requires flux because metals oxidize extremely fast under high soldering temperatures.

This Stannol flux paste is a preparation of activated rosin (colophony resin) in mineral greases and is used as flux for general soldering work.

The flux paste is ideal for preparing copper, copper alloys, nickel and nickel alloys before soldering and is also suitable for electrical engineering applications including cable tinning, soldering large connectors and shielding plates.

• Complies with DIN EN 23454-1 01/01/02.C
• Supplied in 50ml packs

Stannol Solder Grease is ideal for use with thick solder, where high heat is required.

• 100g pack
• Ensures a good joint, e.g. when soldering metal sheets, copper pipes, brass, etc.

Stannol Solder Grease is ideal for use with thick solder, where high heat is required.

• 50g pack
• Ensures a good joint, e.g. when soldering metal sheets, copper pipes, brass, etc.

Stannol Kolophonium Acid-Free Rosin Flux is an acid-free flux suitable for electronics.

Colophony (also referred to as rosin) is an amber-coloured brittle, glassy solid at room temperature and becomes liquid at temperatures of 80 to 100°C.

In practical use, small amounts can be chipped off and dissolved in isopropyl alcohol (IPA), or it can be melted by gentle heat from a soldering iron. The resulting liquid can then be brushed or dripped onto the item to be soldered.

• Supplied in 20g packs

Stannol Solder Grease is ideal for use with thick solder, where high heat is required.

• 20g pack
• Ensures a good joint, e.g. when soldering metal sheets, copper pipes, brass, etc.

The Stannol Fine Fluxer 350 Flux Pen is ideal for repairs and hand-mounting of SMD components on densely populated boards and ceramic substrates.

• Precise application via pen
• Excellent wetting properties with lead-free alloys
• Easy handling in difficult to access places
• No-clean, electrically safe
• Colour: light yellow
• Density (at 20°C): 0.927g/cm³
• Flash point: 12°C
• Ignition temperature: ~ 400°C
• Solid content: 29.7%
• Acid number: 21mg KOH/g
• Supplied in an 8ml applicator pen

Warton Metals Activ8 102 Water-Based Liquid Flux has been specifically formulated for stainless steel applications.

• Suitable for use with automated machines such as the Pillarhouse machine
• Residue is simply removed with warm water
• Does not contaminate plating baths
• Supplied in 500ml bottles
• Warton Metals type Activ8-102

Warton metals brown flux jelly is an easy to use, non-corrosive, rosin-based jelly flux suitable for electrical and general purpose soldering of commonly encountered metals.

• Residue can be removed using normal solvent cleaner
• It is recommended that disposable gloves be worn when handling this product, see Health & Safety section
• Supplied in a 100g pot

Warton metals brown flux jelly is an easy to use, non-corrosive, rosin-based jelly flux suitable for electrical and general purpose soldering of commonly encountered metals.

• Residue can be removed using normal solvent cleaner
• It is recommended that disposable gloves be worn when handling this product, see Health & Safety section
• Supplied in a 50g pot

Warton Metals DF1 Rosin Activated Dipping Flux is a unique blend of rosins and activators dissolved in an alcohol solution. It also leaves a hard, protective, non-corrosive insulating residue on soldered joints.

• Excellent solderability on copper, nickel, silver, gold, tin and soldered surfaces
• Removes surface oxides
• Prevents oxide formation during soldering
• Supplied in 500ml bottles Warton Metals type DF1

Warton Metals EC45 Ecowave VOC Free, No-Clean Flux is a VOC-free, no-clean wave soldering flux, offering absolute cleanliness and soldering performance with both lead-based and lead-free alloys.

• Exhibits no solder-balling even with a topside board temperature as low as 80°C (176°F)
• Suitable for use with most types of wave soldering equipment and circuit technology
• Supplied in 500ml bottles
• Warton Metals type EC45

Future 315 low-residue, no-clean flux is a 2% solids colophony (rosin) free and halide-free flux, suitable for most no-clean soldering applications.

• Low residue
• No-clean flux
• Improves soldering performance - no bridges or icicles
• Reduces costs as no cleaning is required
• Offers excellent solderability with minimal level of flux residue
• Suitable for spray or foam fluxing systems
• Suitable for conventional, mixed and surface mount technologies
• Applications include telecommunications, computer and general consumer electronics
• Supplied in a 125ml spray bottle

Future 315 low-residue, no-clean flux is a 2% solids colophony (rosin) free and halide-free flux, suitable for most no-clean soldering applications.

• Low residue
• No-clean flux
• Improves soldering performance - no bridges or icicles
• Reduces costs as no cleaning is required
• Offers excellent solderability with minimal level of flux residue
• Suitable for spray or foam fluxing systems
• Suitable for conventional, mixed and surface mount technologies
• Applications include telecommunications, computer and general consumer electronics
• Supplied in a 500ml bottle

Warton Metals Future HF SMT Rework Jelly and Solder Wire Pack is a convenient flux and solder kit consisting of a 10g syringe of Future HF halide-free flux jelly and a supply of 28swg flux-cored solder wire.

• The fine applicator nozzle allows the flux jelly to be accurately dispensed onto a small area prior to soldering
• Solder content: 62% tin, 2% silver, 36% lead
• Melting temperature: 179°C

Surf Clean SCS-15-22 is an ozone-friendly, aqueous-based saponification cleaning solution used for efficient cleaning of electronic assemblies and general degreasing operations.

SCS15-22 has a non-flammable formulation and is suitable for manual and automated ultrasonic or spray-under-immersion batch cleaning methods and easily removes post-soldering residues from rosin / resin and no-clean type fluxes following wave soldering or hand assembly.

It is suitable for assemblies which do not contain sensitive substrates or metals and is a formulated blend of water, biodegradable solvent and basic neutralising agent designed to quickly eliminate acidic flux residues with a capability of absorbing over 15% the weight of the cleaner of resinous / flux solids.

Due to the active amine neutralizing agent, extended soak times allow SCS 15-22 to be used for micro-etching applications which require both a slight chemical abrasion and excellent cleanliness prior to plating, by generating an improved surface for good plating results.

S-15-22 contains a useful staged-colour indicator system, offering the user a quick visual method to determine the condition of the cleaning solution. Traditional conductivity control methods can also be utilized.

• Water-based, non-flammable
• Ready to use - no dilution required
• Exceptional cleanliness to military standards (J-STD001B)
• Non-offensive odour
• Quick removal of rosin and resin flux
• Effective neutralisation of acidic no-clean fluxes
• Low temperature cleaning
• Ozone friendly and biodegradable
• Compatible with Warton Metals range of Nexus lead free soldering materials
• Supplied in a 10 litre bottle
• Warton Surf Clean SCS-15-22 10L

Surf Clean SCS-15-22 is an ozone-friendly, aqueous-based saponification cleaning solution used for efficient cleaning of electronic assemblies and general degreasing operations.

SCS15-22 has a non-flammable formulation and is suitable for manual and automated ultrasonic or spray-under-immersion batch cleaning methods and easily removes post-soldering residues from rosin / resin and no-clean type fluxes following wave soldering or hand assembly.

It is suitable for assemblies which do not contain sensitive substrates or metals and is a formulated blend of water, biodegradable solvent and basic neutralising agent designed to quickly eliminate acidic flux residues with a capability of absorbing over 15% the weight of the cleaner of resinous / flux solids.

Due to the active amine neutralizing agent, extended soak times allow SCS 15-22 to be used for micro-etching applications which require both a slight chemical abrasion and excellent cleanliness prior to plating, by generating an improved surface for good plating results.

S-15-22 contains a useful staged-colour indicator system, offering the user a quick visual method to determine the condition of the cleaning solution. Traditional conductivity control methods can also be utilized.

• Water-based, non-flammable
• Ready to use - no dilution required
• Exceptional cleanliness to military standards (J-STD001B)
• Non-offensive odour
• Quick removal of rosin and resin flux
• Effective neutralisation of acidic no-clean fluxes
• Low temperature cleaning
• Ozone friendly and biodegradable
• Compatible with Warton Metals range of Nexus lead free soldering materials
• Supplied in a 5 litre bottle
• Warton Surf Clean SCS-15-22 5L

Warton Surf Clean SCS-18-44 is an ozone-friendly, aqueous-based saponification cleaning solution used for the efficient cleaning of electronic assemblies and general degreasing operations.

SCS-18-44 has a non-flammable formulation which is suitable for manual and automated ultrasonic or spray-under-immersion batch cleaning methods and easily removes post-soldering residues from rosin / resin and no-clean type fluxes following wave soldering, reflow soldering and hand assembly.

It is suitable for assemblies which do not contain sensitive substrates or metals and is a formulated blend of water, biodegradable solvent and basic neutralising agent designed to quickly eliminate acidic flux residues with a capability of absorbing over 15% the weight of the cleaner of resinous / flux solids.

Due to the active amine neutralizing agent, extended soak times allow SCS 18-44 to be used for micro-etching applications which require both a slight chemical abrasion and excellent cleanliness prior to plating, by generating an improved surface for good plating results.

SCS-18-44 contains a useful staged-colour indicator system, offering the user a quick visual method to determine the condition of the cleaning solution. Traditional conductivity control methods can also be utilized.

• Water-based, non-flammable
• Ready to use - no dilution required
• Exceptional cleanliness to military standards (J-STD001B)
• Non-offensive odour
• Quick removal of rosin and resin flux
• Effective neutralisation of acidic no-clean fluxes
• Low temperature cleaning
• Ozone-friendly and biodegradable
• Compatible with Warton Metals Nexus lead-free soldering materials
• Supplied in a 10 litre bottle
• Warton Surf Clean SCS-18-44 10L

Warton Surf Clean SCS-18-44 is an ozone-friendly, aqueous-based saponification cleaning solution used for the efficient cleaning of electronic assemblies and general degreasing operations.

SCS-18-44 has a non-flammable formulation which is suitable for manual and automated ultrasonic or spray-under-immersion batch cleaning methods and easily removes post-soldering residues from rosin / resin and no-clean type fluxes following wave soldering, reflow soldering and hand assembly.

It is suitable for assemblies which do not contain sensitive substrates or metals and is a formulated blend of water, biodegradable solvent and basic neutralising agent designed to quickly eliminate acidic flux residues with a capability of absorbing over 15% the weight of the cleaner of resinous / flux solids.

Due to the active amine neutralizing agent, extended soak times allow SCS 18-44 to be used for micro-etching applications which require both a slight chemical abrasion and excellent cleanliness prior to plating, by generating an improved surface for good plating results.

SCS-18-44 contains a useful staged-colour indicator system, offering the user a quick visual method to determine the condition of the cleaning solution. Traditional conductivity control methods can also be utilized.

• Water-based, non-flammable
• Ready to use - no dilution required
• Exceptional cleanliness to military standards (J-STD001B)
• Non-offensive odour
• Quick removal of rosin and resin flux
• Effective neutralisation of acidic no-clean fluxes
• Low temperature cleaning
• Ozone-friendly and biodegradable
• Compatible with Warton Metals Nexus lead-free soldering materials
• Supplied in a 5 litre bottle
• Warton Surf Clean SCS-18-44 5L

Weller Electronic Flux is a halogen-free, colophony-based liquid flux that promotes fast and efficient soldering of electronic components. It is also suitable for use with tin plating and solder-pot-dip tin plating. The liquid flux remains on the soldered area and should be removed using a suitable flux cleaner if a flux-free board is required.

• Colophy-based liquid flux
• Promotes fast and efficient soldering
• Halogen-free
• Conforms to DIN EN 29454 Typ 1.1.3.A (F-SW 32)
• Supplied in 100ml pots