Counterbore with a slow spiral drill fitted. Tungsten Carbide Tipped for use in abrasive materials.

Specifications:

D1 3/16 inch D1 4.75 mm D2 1/2 inch D2 12.7 mm Shank Diameter 1/4 inch.

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.

Drill Size.3.2mm. 1/8in.Countersink Size. No.10.

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.

Drill Size.3.6mm. (9/64in).Countersink Size. No.12.

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.

Drill Size. 2.0mm. (5/64in)Countersink Size. No.4.

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.

Drill Size: 2.4mm (3/32in).Countersink Size: No.6.

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.

Drill Size. 2.8 mm (7/64in)Countersink Size. No.8.

The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clearing.

They are adjustable for different length screws and will produce a 9.5mm (3/8in) or 12.7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains:

1 x 2.0mm (5/64in) Drill and C/S Size No.4.1 x 2.4mm (3/32in) Drill and C/S Size No.6.1 x 2.8mm (7/64in) Drill and C/S Size. No.8.1 x 3.2mm (1/8in) Drill and C/S Size. No.10.1 x 3.6mm (9/64in) Drill and C/S Size. No.12.

Fitted with High-Speed Steel drill bits to cover the full range of screw sizes and are self clearing.

The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clearing.

They are adjustable for different length screws and will produce a 9.5mm (3/8in) or 12.7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains:

1 x 2.0mm (5/64in) Drill and C/S Size No.4.1 x 2.4mm (3/32in) Drill and C/S Size No.6.1 x 2.8mm (7/64in) Drill and C/S Size. No.8.1 x 3.2mm (1/8in) Drill and C/S Size. No.10.1 x 3.6mm (9/64in) Drill and C/S Size. No.12.

Tungsten carbide tipped version, these tools can be used in abrasive materials such as laminated chipboard. The drills produce pilot holes only.

The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft.

The Hex shanks snap into the quick chuck.

Size: 3/32in ( with collet)

The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft.

The Hex shanks snap into the quick chuck.

The HSS Drill Bits in this 7 piece set are gripped by a spring steel collet into the hex shaft.

The hex shanks snap into the Quick Chuck.

Contents.

1.6 mm (1/16in) Drill.2.4 mm (3/32in) Drill.3.2 mm (1/8in) Drill.4.0 mm (5/32in) Drill.4.8 mm (3/16in) Drill.5.6 mm (7/32in) Drill.6.3 mm (1/4in) Drill.With collets.

The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft.

The Hex shanks snap into the quick chuck.

Content:1mm Drill2mm Drill3mm Drill4mm Drill5mm Drill6mm Drill7mm DrillWith collets.

These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.

Drill Size. 2.0 mm (5/64in).Screw Size. No.6.

These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.

Drill Size. 2.75 mm (7/64in).Screw Size. No. 8

These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.

Drill Size.3.5 metre (9/64in).Screw Size. No.10

These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.

This set comprises a quick chuck and three sizes of drill bit guides for accurate fitting of hinges.

Contents:

1 x Quick chuck.1 x Drill bit guide 5/64in.1 x Drill bit guide 7/64in.1 x Drill bit guide 9/64in.

A four piece drill countersinking and screwdriving flip over set.

The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the quick chuck. The hex collar is supplied in the sets to enable drills to be removed with two spanners.7 piece drill set.1.5, 2, 2.5, 3, 4, 5 and 6mm.Supplied in a storage tube.

Magnetic screwdriver holder.

Designed to hold longer screws securely on to the screwdriver bit, with an extra magnetic ring. Accepts 25 mm insert bits and has an adjustable barrel.Supplied with one No 2 pozi bit.

Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.

For cutting 1/2 inch (12.7mm) Plugs

Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.

For cutting 3/8 inch (9.5mm) Plugs.

Heavy-duty fabric tool holder available with assorted Snappy tools.

Standard Quick Chuck, Masonry bits 5,6,7 & 8mm, Drill bit guide No.6, No8.Drills 1,2,3,4,5,6 & 7mm, Auger bits 10 & 13mm, Flat bits 16, 19, 22, 25 & 30 mm.Drill countersinks 2.5, 3.25 & 3.5mm, Deburrer/countersink, Hole enlarger.Square drive adapter 1/4,3/8 & 1/2in, Screwdriver bit Pozi No.1,2,3.Magnetic drivers 6, 8, 10 & 12 mm. A/F, Snappy PencilInsert bits Magnetic bit holder (including 5 slotted 3 Pozi, 3 Phillips, 6 hex & 6 Torx).