These Keyed Chucks from Bosch have a 1/2in. X 20 UNF thread fitting and are supplied with a key.

Keyed chucks up to 13 mm 1.5 - 13 mm, 1/2" - 20.

• Type: Keyed chuck 13mm
• Shank diameter: 13mm
• Tool holder: 1/2inch x 20 UNF
• Drill features: Forward / reverse / hammer
• Manufacturer's part no.: 1608571062

These Keyed Chucks from Bosch have a 1/2in. X 20 UNF thread fitting and are supplied with a key.

Keyed chucks up to 13 mm 2.5 - 13 mm, SDS-plus, Hammer-resistant version.

• Type: Keyed chuck 13mm
• Shank diameter: 13mm
• Tool holder: SDS-PLUS
• Drill features: Forward / reverse / hammer
• Manufacturer's part no.: 1618571014

These Keyed Chucks from Bosch have a 1/2in. X 20 UNF thread fitting and are supplied with a key.

• Type: Keyed chuck 13mm & SDS-plus adaptor
• Shank diameter: 13mm
• Tool holder: 1/2inch x 20 UNF
• Manufacturer's part no.: 2607000982

These Quick Change Chucks from Bosch have SDS-PLUS shanks and are compatible with Bosch rotary hammer drills.

SDS-plus quick-change chuck SDS-plus, suitable for GBH 4 DFE; GBH 4 DSC Professional; PBH 300 E.

• Type: SDS-Plus quick change chuck
• Tool holder: SDS-PLUS
• Manufacturer's part no.: 2608572059

These Keyless Chucks from Bosch have 1/4in. (6.3mm) hexagonal shanks.

• Type: Keyless chuck 6mm
• Shank diameter: 6mm
• Tool holder: 1/4in. (6.3 mm) hex shank
• Manufacturer's part no.: 2608572072

These Keyless Chucks from Bosch have 1/4in. (6.3mm) hexagonal shanks.

Keyless chucks up to 10 mm 1 - 10 mm, 1/4" - 6k.

• Type: Keyless chuck 10mm
• Shank diameter: 10mm
• Tool holder: 1/4in. (6.3 mm) hex shank
• Manufacturer's part no.: 2608572075

These Quick Change Chucks from Bosch have SDS-PLUS shanks and are compatible with Bosch rotary hammer drills.

SDS-plus quick-change chuck SDS-plus, suitable for GBH 2-24 DFR; GBH 24 VFR Professional; PBH 200 FRE; PBH 240 RE.

• Type: SDS-Plus quick change chuck
• Tool holder: SDS-PLUS
• Manufacturer's part no.: 2608572112

These Keyless Chucks from Bosch have 1/4in. (6.3mm) hexagonal shanks.

Keyless chuck, matt chrome-plated 1.5 - 13 mm, 1/2" - 20, suitable for GSB 20-2; GSB 20-2 RCE; GSB 20-2 RE; GSB 20-2 RET; GSB 21-2 RE Professional; PSB 850; PSB 1000; PSB 1200.

• Type: Keyless chuck 13mm
• Shank diameter: 13mm
• Tool holder: 1/2inch x 20 UNF
• Drill features: Forward / reverse / hammer
• Manufacturer's part no.: 2608572150

Tough steel, chrome plated construction . Hex drive to DIN 3126-C6,3 ISO 1173

This 25mm chisel bit from DeWalt has been manufactured to a high standard via toughened steel which ensures tough bits. The flat end bit also features micro-processor controlled heat treatment for consistently tough, long life chisels.

• Width: 25mm
• Length: 300mm
• Manufacturer's part DT6822-QZ

This keyless chuck 13mm from DeWalt is a plastic sleeved keyless chuck which can be used with both corded and cordless drills of the following specifications: Fitment: 1/2in x 20 UNF.

• Chuck capacity: 13mm
• Manufacturer's part DT7002-QZ

This keyed chuck 13mm from DeWalt can be used with both corded and cordless drills of the following specifications: Fitment: 1/2in x 20 UNF.

• Chuck capacity: 13mm
• Manufacturer's part DT7012-QZ

The DEWALT DT7021QZ Chuck Key has a universal design with a clamping range of 10-13mm.

This SDS plus chuck adaptor from DeWalt is a 1/2in x 20 UNF adaptor which screw fits all machines with SDS fitting.

• Weight 52g
• Manufacturer's part DT7030-QZ

This 13mm keyless chuck from DeWalt is a professional, heavy-duty chuck with carbide jaws for extra grip. It is suitable for DeWalt and other makes of drills.

• Capacity: 13mm
• Fitment: 1/2in x 20UNF
• Manufacturer's part DT7043-QZ

For use with most manufacturers rotary and hammer drills. Carton packed.

For use with most manufacturers rotary and hammer drills. Carton packed.

For use with most manufacturers rotary and hammer drills. Carton packed.

For use with most manufacturers rotary, hammer and air powered drills. Display packed.

For use with most manufacturers rotary, hammer and air powered drills. Display packed.

For use with most manufacturers rotary, hammer and air powered drills. Display packed.

Faithfull heavy-Duty keyed chuck for use on both Rotary and Impact drills. Fitted with an anti-thrust bearing to increase the amount of grip and to prevent slipping when under load.

Designed in accordance to DIN 6349

The FAICHUCK12 comes complete with key and adaptor for use with SDS and SDS Plus machines.

When used with SDS machines, the drill MUST NOT be used in hammer mode

1/2in x 20 UNF thread. Capacity 13mmComplete with chuck key.

Keyless chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes. The all steel construction provides a long working life making this chuck ideal for use on professional hammer drills. The chuck also features a non-slip locking system for impact drilling and holesaw applications1/2in x 20 UNF thread.Heavy-duty all steel constructionJaw locking system for hammer use

Faithfull heavy-Duty keyed chuck for use on both Rotary and Impact drills. Fitted with an anti-thrust bearing to increase the amount of grip and to prevent slipping when under load.

Designed in accordance to DIN 6349

3/8in x 24 UNF thread. Capacity 10mmComplete with chuck key.

The Faithfull Keyless Chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes and features a non-slip locking system for impact drilling and holesaw applications.

Capacity 0.8 -10mm3/8in x 24 UNF thread. Suitable for use on rotary drills and drill drives.

The Faithfull 4 Way Chuck Key is a convenient four armed chuck key suitable for use on many electric or cordless drills and bench mounted power tools that are fitted with a keyed chuck of 10 or 13mm capacity.

1 x Key Size: 10 gear teeth, pilot hole 5.2mm.1 x Key Size: 10 gear teeth, pilot hole 6.8mm.2 x Key Size: 11 gear teeth, pilot hole 5.8mm.

The Faithfull CHUCKMAX is a SDS Max to SDS Plus Adaptor with a 225mm overall length.

It enables the use of SDS Plus shanked drill accessories with an SDS Max machine.

The Faithfull right angle drill attachment may be used with either a cordless or electric powered drill when drilling or screwdriving where access is restricted. Ideal for use in between joists when running cables or pipe work or for working inside confined spaces such as kitchen cabinets.

The drive is fitted with a ball bearing shaft support for a long working life and a 10mm (3/8in) keyless chuck for ease of use. Attaches into any 10mm (3/8in) and larger electric or air drill chuck.

Overall dimensionsL150mm x D100m x W60mm

This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF.

Please note: Drill MUST NOT be used in hammer mode when using this adaptor.

These handy adaptors will convert your SDS drill into a useful tool for setting and removing nuts, bolts and coach bolts. The adaptors cover three common drive sizes - 1/4in, 3/8in and 1/2in and are an ideal labour saving device when quantities of bolts or nuts are being used, making light work of this type of repetitive task.ATTENTION: These adaptors are recommended for use with 2kg SDS fixing hammers with a hammer stop function. ROTARY USE ONLY must not be used on percussion / hammer mode.Set contains the following adaptors:SDS-Plus to 1/4in Square driveSDS-Plus to 3/8in Square driveSDS-Plus to 1/2in Square drive

The Faithfull pin chuck is a useful accessory for holding drills too small to be held by standard capacity drill chucks.

Supplied with three collets of the following sizes:

1 x 0 - 0.75mm (0 - 1/32in).

1 x 0.75 - 1.5mm (1/32 - 1/16in).

1 x 1.5 - 2.5mm (1/16 - 3/32in).

Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.

Size: 1Capacity: 0 - 1mm (0 - 3/64 in)

Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.

Size: 2Capacity: 0.75 - 1.5mm (1/32 - 1/16)

Pin vices are chiefly used for holding small taps, reamers, scribers or wire. The handles are tubular which permit holding wires of any length or diameter up through the length of the tool.

Size: 3Capacity: 1.5 - 3mm (1/16 - 1/8 in)

The HiKOKI 711099 Keyless Chuck and Adaptor allows you to convert your SDS Plus Chuck into a 13mm Keyless Chuck.

For use with SDS Plus Drill to allow you to use conventional drill bits.

The HiKOKI Chuck & Key, industrial quality, with fully hardened and ground working components. Offers exceptionally high accuracy, gripping power and durability.

Capacity: 13mm 1/2 x 20 UNF

The Rohm EXTRA-RV 40 Plastic Keyless Chucks are for corded and cordless drills, with or without a spindle stop, up to a maximum torque of 60Nm and up to 650 Watt. These impact-resistant, quick-action drill chucks have a radial locking plastic sleeve. With a through-hole for use with a locking screw.

The Rohm 1261217 EXTRA-RV 40 Plastic Keyless Chuck has a radial locking plastic design with a retaining ring and a through-hole.

A comprehensive selecion of precision crafted chuck keys with nickel plated T-handles.

S3

A comprehensive selecion of precision crafted chuck keys with nickel plated T-handles.

S4

A comprehensive selecion of precision crafted chuck keys with nickel plated T-handles.

S1

A comprehensive selecion of precision crafted chuck keys with nickel plated T-handles.

S14

A comprehensive selecion of precision crafted chuck keys with nickel plated T-handles.

S8

PRIMA plain bearing chucks are widely used for hand operated percussion drilling machines. Smaller and intermediate sizes.

Industrial quality chuck with fully hardened and ground working components which offers exceptionally high accuracy , gripping power and durability.

PRIMA plain bearing chucks are widely used for hand operated percussion drilling machines. Smaller and intermediate sizes.

Industrial quality chuck with fully hardened and ground working components which offers exceptionally high accuracy , gripping power and durability.

13mm Cap - 1/2 x 20 Female

A comprehensive selecion of precision crafted chuck keys with nickel plated T-handles.

S9

This SDS chuck adaptor fits an SDS powertool. Supplied with left-hand thread retaining screw.

1/2 x 20 mount.

This adaptor fits a female chuck and a female powertool.

3/8 x 24 mount.

SDS Hammer chuck with a rugged construction ensuring extended service under the most demanding concrete drilling operations. Unique Hammerlock mechanism provides full gripping pressure and prevents drill slippage during hammer drilling.

A comprehensive selecion of precision crafted chuck keys with nickel plated T-handles.

S7

A comprehensive selecion of precision crafted chuck keys with nickel plated T-handles.

S10 (K3)