Moulded from tough high quality plastic to give exceptional rigidity. Two sprung clamps for holding workpiece. Two 45°, two 22.5° and one 90° guides on the two edges with a side on 45° for larger sections of materials. Two bench edge stops on the underside to prevent movement whilst working. The base has two countersunk slots for permanent fixing to bench. Sold loose.

Moulded from tough high quality plastic to give exceptional rigidity. Two 45° and one 90° guides on the two edges with a side on 45° for larger sections of materials. The base has two countersunk slots for permanent fixing to bench. Sold loose.

Medium sized box, moulded from tough impact resistant recycled material. Two 45° and one 90° guides on both edges. The base has two countersunk slots for fixing to bench. Ideal for picture rails and other medium work. Sold loose.

Beechwood with two 45° and one 90° guides on both edges. Sold loose.

Moulded from tough impact resistant recycled plastic, this Draper mini mitre box has two 45° and one 90° guide on both edges.

• 2 countersunk holes for fixing to workbench
• Ideal for small scale or precision work including model making etc.
• Length 200mm
• Height 50mm
• Width of internal slot 35mm
• Draper type 48677

Moulded from tough impact resistant recycled plastic. Two 45° and one 90° guide on both edges and two countersunk holes for fixing to workbench. One edge is deeper to facilitate easier cutting. Sold loose.

General purpose box, moulded from tough impact resistant recycled material. One 45°, 60° and 90° guide on both edges. The base has two countersunk slots for fixing to bench. Ideal for the cutting of most sizes of coving, skirting boards etc. Sold loose.

• Maximum width of skirting board: 180mm

These Faithfull mitre blocks are made from high-quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability.

With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws.

Ideal for use when cutting picture frame joints and general carpentry work.

Block Length: 300mm (12in)

Block Width: 64mm (2.1/2in)

The Faithfull Mitre Box is made from high-quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability.With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws.Ideal for use when cutting picture frame joints and general carpentry work.

Box Length: 230mm (9in)Box Width: 115mm (4.1/2in) Capacity

The Faithfull Mitre Box is made from high-quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability.With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws.Ideal for use when cutting picture frame joints and general carpentry work.

Box Length: 305mm (12in)

Box Width: 115mm (4.1/2in) Capacity

These Faithfull mitre blocks are made from high-quality European beech, the sides and bases are glued and screwed together to provide extra strength and durability.

With accurate slots for cutting 45° or 90° angles, they are designed for use with tenon or backsaws.

Ideal for use when cutting picture frame joints and general carpentry work.

Block Length: 230mm (9in)

Block width: 64mm (2.1/2in)

Faithfull Mitre Box made from high-impact polystyrene plastic. It is ideal for use with a tenon saw when cutting mitred or straight joints. This box features 22.5°, 45° and 90° guide slots for multi-angled cuts and a 45° compound cut slot. Two cam locking pegs are included for secure clamping of the workpiece. A bench edge stop on one side of the base prevents movement whilst sawing. Countersunk fastening holes allow the mitre box to be secured to a workbench for extra stability.

Specification:

Max. Workpiece Depth: 75mmMax. Workpiece Width: 120mmOverall Size: 310 x 170 x 100mm

This aluminium mitre box from Model Craft has been designed to use with razor saws and holds materials with a thickness of up to 44mm (1.75in) and a length of 140mm (5.5in). The box can also be used with junior hacksaws to cut square ends, perfect splices and angled or mitred corners.

• An excellent aid for cutting perfect angles, mitred corners and splices
• Compatible with razor saws and junior hacksaws
• Manufacturer's part PSA35/260

All in one, easy-to-use mitre box. 90°, 45° and 22.5° slots. 300mm length with a patented storage system for the saw.

All in one, easy-to-use mitre box. 90°, 45° and 22.5° slots. 300mm length with a patented storage system for the saw.

A patented cam lock clamping feature secures workpiece for easy accurate cutting. A built-in saw stop prevents cutting into the mitre box.

A patented cam lock clamping feature secures workpiece for easy accurate cutting. A built-in saw stop prevents cutting into the mitre box.

A plastic moulded mitre box suitable for use with the Zona range of saws to cut square ends, perfect splices and angled or mitred corners.

• Adjustable stop and bevelled channel for tubing and dowels
• Holds material up to 38mm wide and 6.3mm thick
• 90°, 45°, 60° and 30° angles
• Suitable for saws with blade thicknesses up to 0.25mm (0.01in)
• Overall length 165mm
• Zona type 35-250

A large, aluminium mitre box suitable for use with the Zona razor saw, 86-0940.

• Guides the saw to produce perfect square ends, splices and angled or mitred corners
• Suitable for material up to 44mm wide and 19mm thick at 90° or 45° angles
• Extruded block has grooves of various sizes in the base to assist in holding small dowels and tubes whilst cutting
• A ridge along one edge of the base allows the block to be held against the edge of a worktop for stability
• Overall dimensions: 140 x 51 x 28mm
• Zona type 35-0260