Expert Quality, Detects live and dead electricity cables, metallic water pipes, nails and wood studs in partition walling. Buzzer sounds when objects are located. Maximum depth penetration; live AC wires 75mm; metal 75mm: wood 18mm; metal pipes 38mm and copper pipes 30mm. Uses a PP3 size battery (sold separately ). Display packed.

The Einhell TC-MD 50 Digital Detector is the ideal tool for DIY enthusiasts in the home, at the building site or for renovation work. It ;reliably locates metal, wood and electric leads. It detects ferrous metals such as steel and live wires to a depth of 50mm and non-ferrous metals such as copper to a depth of 38mm. Wood can also be detected to a depth of 19mm.

It is simple and easy to operate due to its acoustic warning signal. Protector pads are also fitted on the back to protect the wall. The soft grip makes it comfortable to operate with just one hand. If set down to one side, it automatically switches off after one minute, without being used.

Specification

Detection Depth: Wood/Metal: 19mm, Ferrous Metal/Live Wires: 50mm, Non-Ferrous Metals/Copper: 38mm.Power: 1 x 9V 6F22 battery (not supplied).Weight: 0.34kg.

This Faithfull versatile advanced electronic detector helps avoid costly mistakes caused by drilling into concealed power cables, gas or water pipes and removes any guesswork when securing fixtures, hanging pictures or fitting shelving by pinpointing a solid base for fixing. The detector can be used to detect and locate wooded studwork, metal and AC voltage, providing a clear indication of concealed objects using the LED and buzzer indicator system. A marking groove is also provided at the top of the detector so that the surface can be marked prior to any drilling, nailing or screwdriving.

Features: Finds wood and metal studs.Finds and identifies a stud centre.Finds AC voltage and scans to trace live cables.Metal scanning to find nails, pipes, rebar and other hidden metal objects.LED and buzzer Indicators.9V 6F22 Alkaline battery included.

Applications: This detector may be used to carry out the following operations:Detect metal pipes in concrete, behind ceilings, floors and walls.Detect wooden studwork behind ceilings and walls.Detect electrical box, exhaust vent, conduit, rebar, and ducting.Detect and trace live cable behind ceilings, floors and walls.

Approximate detection depths: Stud mode: Wood stud of 30x30mm: ≤14mm.Metal mode: Iron pipe of dia. 25mm: ≤25mm.AC mode: Typical depth of 50mm for 90-250V at 50-60Hz.

Combined unit to accurately detect live or dead electricity cables, water or gas pipes and wooden studs or battens with ease. Powered by a 9V battery (supplied) the detector will, with a red and green LED display and an audible signal, show the presence of metal, electricity and wooden studs or battens.