A Martindale extension lead tester for PAT checking. This unit includes an integral IEC mains lead test feature and essential extras for anyone carrying out PAT tests.

Designed for use with EasyPAT, MicroPAT+, PAC1500xi, PAT1900xi, PAT2100xi, AT500H, MPAT40, MPAT60, Megger PAT4, Robin PATs and all Edgcumbe (Metrohm PATs).

• Applied Test Voltage: 110V ±10% or 240V ±10%, 50/60Hz
• Installation (IEC1010): CAT II 300V
• Leads: 240V BS 1363 to IEC line socket, 110V BS 4343 to IEC line socket
• Pollution (IEC1010): CAT II
• Operating Temperature: 0°C to +35°C
• Storage Temperature: -10°C to 50°C
• Housing: ABS
• Dimensions: 141 x 82 x 51mm

Which Seaward PAT tester is best for you? Help me decide

SE Delta 16-4 pin, 16A, 415V.

This adaptor allows Earth Continuity and Insulation Resistance measurements to be made on 3 phase equipment using PAT testers with a standard UK 240V test socket.

• 3 Phase adaptor (Delta 4 pin 16A)
• 3 phase earth continuity test adaptor
• 3 phase insulation resistance test adaptor

Which Seaward PAT tester is best for you? Help me decide

SE Star 16 - 5 pin, 16A, 415V.

This adaptor allows Earth Continuity and Insulation Resistance measurements to be made on 3 phase equipment using PAT Testers with a standard UK 240V test socket.

• 3 phase earth continuity test adaptor
• 3 phase insulation resistance test adaptor

Which Seaward PAT tester is best for you? Help me decide

SE Delta 32 - 4 pin, 32A, 415V.

This adaptor allows Earth Continuity and Insulation Resistance measurements to be made on 3 phase equipment using PAT Testers with a standard UK 240V test socket.

• 3 Phase adaptor (Delta 4 pin 32A)
• 3 phase earth continuity test adaptor
• 3 phase insulation resistance test adaptor

These unique Seaward 3 Phase adaptors SW3-Star-5-Pin-32A-415V allow both Earth Continuity and Insulation Resistance measurements to be made on 3-phase equipment using PAT Testers with a standard UK 240V test socket.

The TPA allows fast and simple earth continuity measurements without removing covers or disconnecting wires to gain access to the protective conductor in the incoming supply, and is very simple to use via the push of a button. A digital display gives clear and accurate measurements, while no additional power supply or batteries are required.

• 3-phase earth continuity test adaptor
• 3-phase insulation resistance test adaptor
• Push button - easy to use
• Clear and accurate measurements

Which Seaward PAT tester is best for you? Help me decide

Which Seaward PAT tester is best for you? Help me decide

Earth bond test lead fitted with large crocodile clip suitable for Seaward Europa Series and Supernova Series PAT Testers.

• Supplied as Seaward Earth lead

Which Seaward PAT tester is best for you? Help me decide

The Seaward 230/110V Adaptor for testing 110V appliances. The Adaptor enable additional functionality to many of Seaward testers.

• Supplied as Seaward 110V to 230V adaptor

Which Seaward PAT tester is best for you? Help me decide

The Seaward 281A075 is a 110 to 230V Power Adaptor that enables the Supernova Elite to test 230V appliances whilst the tester is powered by a 110V supply. The Supernova Elite is the only PAT tester on the market which has this functionality

By connecting the BS1363 13A 230V mains supply plug on your dual voltage PAT tester into the Seaward 110V mains supply adaptor (281A075), you can conduct mandatory PAT tests to 110V appliances, as well as load and leakage tests.

• Allows testing 230V appliances with a 110V power supply
• Manufacturer's part: Seaward 281A075

The Seaward 300A002 is a 0.5m Extension Adaptor. The extension adaptor is fitted with a UK mains plug at one end and an IEC plug at the other end.

• Supplied length: 0.5m
• Supplied in Red
• Manufacturer's part: Seaward 300A002

Which Seaward PAT tester is best for you? Help me decide

Which Seaward PAT tester is best for you? Help me decideSeaward Earth Test Lead for use with PrimeTest 50, PrimeTest 100 and PrimeTest 300. This earth test lead is primarily a probe, but can additionally have a crocodile clip fixed at the end of the lead for testing a range of equipment, while PAT Testing.

• Supplied as Seaward earth lead

Compliment your Seaward Primetest 100 PATBag with this earth lead. The earth lead like the rest of Seaward accessories has been well designed and made to last.

• Supplied as Seaward Primetest 100 earth lead

Which Seaward PAT tester is best for you? Help me decide

Which Seaward PAT tester is best for you? Help me decide

A RCD to test trip time, protective conductor current and touch current where required.

• Compact and portable
• Can be used in all situations where RCD test is required
• Can be used with Seaward Primetest 250
• Manufacturer's part 372A953

The Seaward 380A951 is an Apollo Test Lead Set and the perfect accessory for use with the Apollo 500 and 600 PAT Testers.

The set consists of 2 test leads fitted with 4mm test probes and detachable alligator clips, ideal for a range of uses.

• For use with Apollo 500 and 600 PAT Testers
• Fitted with 4mm test probes and detachable alligator clips
• Supplied 1x Black and 1x Red
• Manufacturer's part: Seaward 380A951

Which Seaward PAT tester is best for you? Help me decide

Which Seaward PAT tester is best for you? Help me decide

The Seaward 391A910 is a 3-Phase Adaptor which will allow earth continuity and protective conductor current measurements to be carried out on 3-phase machinery, as required by the IEE Code of Practice.

The 32A adaptor has been designed and manufactured for use with the PrimeTest 250 PAT tester. It will quickly and easily measure the protective conductor current without removing any covers, or disconnecting wires to gain access to the protective conductor in the in-coming supply. Simply connect the adaptor in-line with the 3-phase equipment under test and connect to the PrimeTest 250.

The adaptor is powered from the 3 phase supply and requires no additional power supply or batteries. At the push of a button, earth continuity and protective conductor current tests will commence and a digital reading of the measured values will be given on the PrimeTest 250 display.

• Quick and easy: No need to remove covers or disconnect wires
• Compact and highly portable
• Enables earth continuity and protective conductor current tests to be performed on 3-phase equipment
• BS 4343 plugs and sockets
• Supplied with a maximum load current of 32A
• Manufacturer's part: Seaward 391A910

Which Seaward PAT tester is best for you? Help me decide

The Seaward 391A920 is a 3-Phase Adaptor which will allow earth continuity and protective conductor current measurements to be carried out on 3-phase machinery, as required by the IEE Code of Practice.

The 16A adaptor has been designed and manufactured for use with the PrimeTest 250 PAT tester. It will quickly and easily measure the protective conductor current without removing any covers, or disconnecting wires to gain access to the protective conductor in the in-coming supply. Simply connect the adaptor in-line with the 3-phase equipment under test and connect to the PrimeTest 250.

The adaptor is powered from the 3 phase supply and requires no additional power supply or batteries. At the push of a button, earth continuity and protective conductor current tests will commence and a digital reading of the measured values will be given on the PrimeTest 250 display.

• Quick and easy: No need to remove covers or disconnect wires
• Compact and highly portable
• Enables earth continuity and protective conductor current tests to be performed on 3-phase equipment
• BS 4343 plugs and sockets
• Supplied with a maximum load current of 16A
• Manufacturer's part: Seaward 391A920

The Seaward 44B238 is a Flash Probe used to perform flash tests safely when using a Seaward Supernova PAT tester.

The lead is red in colour for easy identification and is fitted with a retractable shroud and hand guard to prevent accidental contact with the probe tip during testing procedures.

This lead is compatible with both the Seaward Supernova and Supernova Plus.

• Supplied in Red
• Manufacturer's part: Seaward 44B238

Which Seaward PAT tester is best for you? Help me decide