The Fluke 50M RD Earthing Cable Reel is an optional extra for the Fluke 1623-2/1625-2 GEO Earth Ground Tester Kits.

This 50m Red Wire connects to Fluke earth ground testers for measuring the ability of the earth ground system or individual electrode to dissipate energy from the site. It terminates with a banana plug and connector to attach earth ground tester to the earth stakes.

Both the plug and the connector can be inserted into the top of reel to avoid unspooling of the cable.

• For use with Fluke 1623-2 / 1625-2 Earth Ground Testers
• Length: 50m
• Colour: Red
• Manufacturer's part: Fluke 50M RD Earthing Cable Reel

The Fluke T5-RLS replacement test lead set is suitable for the Fluke T5-600 and T5-1000 instruments. Measuring tips are not included.

The Fluke TL175 TwistGuard test lead set has important new features to conform to the latest test standards. By twisting the probe the operator can adjust the length of the exposed metal tip which satisfies the requirement in EN 61010-031 that there should be less than 4mm of conductive tip for CAT III and CAT IV instruments. A window near the probe tip shows the CAT rating of the current tip exposure such as CAT II 1000 V, CAT III 1000 V, CAT IV 600 V. The silicon leads, as well as being rated for over 30,000 bends, feature two coloured coatings (red over white) which makes wear and damage immediately apparent. The test leads are fitted with 4mm shrouded banana plugs for universal compatibility. This version has 2mm probe tips, another version is available (55-2161) with 4mm lantern adaptors that screw onto the probe tips.

• Adjustable measurement category CAT II, CAT III etc.
• Exposed probe tip length 19 to 4mm (0.75 to 0.16in)
• Cable wear display
• 2mm probe tips
• Shrouded 4mm banana plugs
• Cable length: 1.2m

The Fluke TL175E TwistGuard test lead set has important new features to conform to the latest test standards. By twisting the probe the operator can adjust the length of the exposed metal tip which satisfies the requirement in EN 61010-031 that there should be less than 4mm of conductive tip for CAT III and CAT IV instruments. A window near the probe tip shows the CAT rating of the current tip exposure such as CAT II 1000 V, CAT III 1000 V, CAT IV 600 V. The silicon leads, as well as being rated for over 30,000 bends, feature two coloured coatings (red over white) which makes wear and damage immediately apparent. The test leads are fitted with 4mm shrouded banana plugs for universal compatibility. This version has 2mm probe tips and 4mm lantern adaptors that screw onto the probe tips, another version is available (55-2153) without the lantern adaptors.

• Adjustable measurement category CAT II, CAT III etc.
• Exposed probe tip length 19 to 4mm (0.75 to 0.16in)
• Cable wear display
• 2mm probe tips
• Shrouded 4mm banana plugs
• Cable length: 1.2m

The Fluke TLK220 Suregrip Industrial Test Lead Set is ideal for industrial applications. The Fluke TLK220 Suregrip set includes two sizes of alligator clips and sharp test probes for reliable connections, test leads and a roomy carry case to hold and protect your meter and all your accessories. All these accessories operate at 1000V CAT III, 600V CAT IV rated.

• Designed to improve steadiness in slippery hands
• Rubber over moulded surfaces and finger-hugging curves
• Gives the user a comfortable, reliable grip on the accessory
• Use can focus on making an accurate measurement
• Large zippered soft case with moveable divider
• Manufacturers part no. Fluke TLK220

Contents:

• AC220 SureGrip alligator clip set
• One pair (red, black) of small, insulated, nickel plated jaws
• Blunt tip grabs round screw heads up to 9.5mm

• AC285 SureGrip large jaw alligator clip set
• One pair (red, black) of large alligator clips with nickel-plated steel jaws
• Multi-purpose tooth pattern grips anything from fine gauge wire to a 20mm bolt

• TP74 Lantern tip test probes
• One pair (red, black) of Industrial test probes
• Sharp, 12 mm stainless steel tip provides reliable contact
• Flexible finger barrier improves grip

• TL224 SureGrip silicone test lead set
• DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
• Right angle connector on one end and straight connector on the other
• Reinforced strain relief
• 1.5m silicone insulated wire resists heat and cold

The Fluke TLK290 flexible socket probe tip set is designed for motor and three-phase sockets. The probe tips have flexible measuring points which can be safely placed into 4 to 8mm sockets. For use with shielded 4mm test leads such as Fluke TL224. Safe contact, for example, with plugs of the type CEE 16 A and CEE 32 A. The set contains three flexible sockets probe tips as well as a large alligator clip.

• 4mm connector for test leads
• Nominal current 8A
• Nominal voltage 1000V
• Reading category CAT III 1000 V

The Fluke TP175 TwistGuard test probe set has important new features to conform to the latest test standards. By twisting the probe the operator can adjust the length of the exposed metal tip which satisfies the requirement in EN 61010-031 that there should be less than 4mm of conductive tip for CAT III and CAT IV instruments. A window near the probe tip shows the CAT rating of the current tip exposure such as CAT II 1000 V, CAT III 1000 V, CAT IV 600 V. The test probes are fitted with 4mm shrouded banana plugs for universal compatibility. This version has 2mm probe tips, another version is available (55-2181) with lantern adaptors that screw onto the probe tips.

• Adjustable measurement category CAT II, CAT III etc.
• Exposed probe tip length 19 to 4mm (0.75 to 0.16in)
• 2mm probe tips

The Fluke TP175E TwistGuard test probe set has important new features to conform to the latest test standards. By twisting the probe the operator can adjust the length of the exposed metal tip which satisfies the requirement in EN 61010-031 that there should be less than 4mm of conductive tip for CAT III and CAT IV instruments. A window near the probe tip shows the CAT rating of the current tip exposure such as CAT II 1000 V, CAT III 1000 V, CAT IV 600 V. The test probes are fitted with 4mm shrouded banana plugs for universal compatibility. This version has 2mm probe tips and 4mm lantern adaptors that screw onto the probe tips, another version is available (55-2179) without the lantern adaptors.

• Adjustable measurement category CAT II, CAT III etc.
• Exposed probe tip length 19 to 4mm (0.75 to 0.16in)
• 2mm probe tips

The Megger Earth Spike Test Kit (1001-810) is supplied with 3 cables (3, 5 and 15m) and 2 x earth rods (200 x 8mm). It is compatible with the Megger MFT1835 and DET3TC.

• Orange, yellow and green leads
• Weight: 700g