The Ansmann DUO LED Worklight is a rechargeable worklight with very bright LED illumination that adjusts to where you want the light to be.

The unit has two independent banks of LEDs that can each swivel horizontally by 180°, as well as the whole unit being able to swivel by 90°. The LEDs are wide angle which, together with the adjustable placement, means that the light will be where you want it to be. There are 120 x 0.5W LEDs making a 60W maximum output, and there is a switch that can adjust the power between Off, 25, 50, 75, 100%.

• Versatile portable worklight
• 14.8V 5200mAh rechargeable Li-Ion battery pack with safety board
• Battery pack USB output socket 5V 2A
• Battery status indication
• Low battery warning
• Deep discharge protection
• IP54 Ingress protection
• IK07 Mechanical protection
• Dimensions (H x W x D) 111.7 x 79.4 x 65.0mm
• Weight 2140g (lamp with battery pack)
• Supplied with battery pack, charger and plug, operating instructions
• Ansmann 1600-0358-44

An Avit 20W COB LED rechargeable site light.

This light has a durable heavy duty stand, that can be positioned so you can direct the light where you need it.

• High Power 20W COB LED - 1500 Lumens
• 4 Lighting modes
• Charging time: 5~6 hours
• Durable heavy duty stand
• Impact resistant tested to IK05
• Water and dirt resistant tested to IP65
• 3.7V 4400mAh Lithium-Ion rechargeable battery
• USB charging cable included
• Manufacturers part: AV15020

This JARO tripod LED floodlight from Brennenstuhl has a modern aluminium casing which, together with a safety glass cover, provides IP65 protection making it ideal for outdoor use.

The spotlight mechanism can be easily swivelled and locked into position and the supplied 5m cable can be neatly wound up.

• LED light with extra bright Everlight SMD LEDs
• Telescopic tripod made from stable, powder-coated steel piping
• Height-adjustable up to 80cm
• Handy and reliable tube clamping nuts
• Supplied with sturdy cable holder
• Light unit not replaceable
• Dimensions 1160 x 1780 x 620mm
• Power consumption 30W
• Power supply 240V
• Luminous flux 2930lm
• Supplied with 5m cable
• Energy efficiency class A+
• Manufacturer's part 1171253334

Rechargeable LED light from Brennenstuhl with a 350lm output and a USB charging port for devices with USB charging cables - such as smart phones - making it highly versatile for use in the house, in the garden, when camping and for various other outdoor activities.

It produces a very bright non-blinding light with an additional spot, which can be combined or used individually.

• All lighting functions can be smoothly dimmed from 100 to 5%
• Additional SOS and flashing function
• Integrated Li-Pol rechargeable battery 3.7V/3.0Ah with charging indicator and integrated USB charging cable
• Mounting options provided by 2 magnets and 2 hooks
• IP44 protection
• Dimensions 120 x 85 x 80mm
• Manufacturer's part 1171540

A CK Tools high power COB LED rechargeable site light.

This light has a magnetic base and the ability to attach to a tripod. The head swivels 360° so you can direct the light where you need it.

• High Power COB LED - 700 Lumens
• 2 Lighting modes
• Charging time: 3 hours
• Magnetic base with the ability to attach to a tripod
• Impact resistant tested to IK05
• Water and dirt resistant tested to IP65
• 3.7V 2200mAh Lithium-Ion rechargeable battery
• USB charging cable included
• Manufacturers part: T9735USB

10 and 5 - watt spot and flood COB LED with three settings. Charged via a micro USB cable and fitted with a standard USB output socket for powering/charging items such as mobile phones. Manufactured from Aluminium and shock resistant plastic and fitted with a swivelling stand and carry handle. Supplied with a micro USB to USB cable.

• Wattage 10-5W
• Light Type COB LED
• Lumens 1000
• Light Settings High/Mid/Red
• Power Source 3.7V 2.2Ah Li-ion battery
• Burn Time 4 hours
• Charging Time 6 hours

Flood lamp incorporating COB LED technology, which provides the unit with a highly efficient super bright lumen output. The light housing is made from cast Aluminium with a toughened glass lens, and attached to a steel tube floor stand with foam handle, all manufactured to IP65 specifications making them suitable for external use. Supplied complete with 3M VDE cable and plug.

Ultra thin flood lights on an adjustable tripod. Incorporating COB LED technology, which provides the unit with a highly efficient super bright lumen output. The light housing is made from cast Aluminium with a toughened glass lens, and attached to a steel tube floor stand with foam handle, all manufactured to IP65 specifications making them suitable for external use. Supplied complete with 3M cable and plug.

Ultra thin flood lights on an adjustable tripod. Incorporating COB LED technology, which provides the unit with a highly efficient super bright lumen output. The light housing is made from cast Aluminium with a toughened glass lens, and attached to a steel tube floor stand with foam handle, all manufactured to IP65 specifications making them suitable for external use. Supplied complete with 3M cable and plug.

Ultra thin flood light with twin lights on an adjustable tripod. Incorporating COB LED technology, which provides the unit with a highly efficient super bright lumen output. The light housing is made from cast Aluminium with a toughened glass lens, and attached to a steel tube floor stand with foam handle, all manufactured to IP65 specifications making them suitable for external use. Supplied complete with 3M cable and plug.

360° omni - directional SMD LED tube light with integral telescopic tripod. The case is manufactured from shock - proof ABS plastic fitted with a translucent tube that houses the SMD LED strips. 2 lighting functions (100%/50%) and attached with a robust metal telescopic tripod, power take of socket to chase a chain of lights to be used or to power other rated items. Supplied with 5M BS approved plug and cable. Display packed.

360° omni - directional SMD LED tube light with integral telescopic tripod. The case is manufactured from shock - proof ABS plastic fitted with a translucent tube that houses the SMD LED strips. 2 lighting functions (100%/50%) and attached with a robust metal telescopic tripod, power take of socket to chase a chain of lights to be used or to power other rated items. Supplied with 5M BS approved plug and cable. Display packed.

360° omni - directional SMD LED tube light with integral telescopic tripod. The case is manufactured from shock - proof ABS plastic fitted with a translucent tube that houses the SMD LED strips. 2 lighting functions (100%/50%) and attached with a robust metal telescopic tripod, power take of socket to chase a chain of lights to be used or to power other rated items. Supplied with 5M BS approved plug and cable. Display packed.

360° omni - directional SMD LED tube light with integral telescopic tripod. The case is manufactured from shock - proof ABS plastic fitted with a translucent tube that houses the SMD LED strips. 2 lighting functions (100%/50%) and attached with a robust metal telescopic tripod, power take of socket to chase a chain of lights to be used or to power other rated items. Supplied with 5M BS approved plug and cable. Display packed.

10 and 5 - watt spot and flood COB LED with three settings. Charged via a micro USB cable and fitted with a standard USB output socket for powering/charging items such as mobile phones. Manufactured from Aluminium and shock resistant plastic and fitted with a swivelling stand and carry handle. Supplied with a micro USB to USB cable.

• Wattage 10-5W
• Light Type COB LED
• Lumens 1000
• Light Settings High/Mid/Red
• Power Source 3.7V 2.2Ah Li-ion battery
• Burn Time 4 hours
• Charging Time 6 hours

10 watt COB rechargeable pivoting work light with two floodlights producing 850 - lumen output. The work lights can be used with a single or double COB LED lights on. Charged via a micro USB cable and fitted with a standard USB output socket for powering/charging items such as mobile phones. Manufactured from shock - resistant plastic and fitted with a 360° pivoting adjustable stand. Supplied with a micro USB to USB cable.

• Wattage 10W
• Light Type COB LED
• Lumens 850
• Light Settings High/Mid
• Power Source 3.7V 5Ah Li-ion battery
• Burn Time 8 hours
• Charging Time 6 hours

10 watt COB rechargeable work light with twin spot and floodlight settings producing a 750 - lumen output. Charged via a micro USB cable and fitted with a standard USB output socket for powering/charging items such as mobile phones. Manufactured from shock - resistant plastic and fitted with support stand. Supplied with a micro USB to USB cable.

• Wattage 10W
• Light Type COB LED
• Lumens 750
• Light Settings High/Spot/Flood
• Power Source 3.7V 4.4Ah Li-ion battery
• Burn Time 5 hours
• Charging Time 5 hours

10 x 4W SMD LED festoon lights. Attached to a 110V 16A plug and attached with 22 metres of cable delivering a total of 3800 lumens. Each light is made from shockproof plastic with frosted lens caps. Suitable for use on building sites.

• Wattage 4W
• Light Type SMD LED
• Lumens 3800
• Light Settings High
• Power Source 110V
• Burn Time N/A
• Charging Time N/A

10 x 4W SMD LED festoon lights. Attached to a 110V 16A plug and attached with 22 metres of cable delivering a total of 3800 lumens. Each light is made from shockproof plastic with frosted lens caps. Suitable for use on building sites.

• Wattage 4W
• Light Type SMD LED
• Lumens 3800
• Light Settings High
• Power Source 110V
• Burn Time N/A
• Charging Time N/A

30W 360° SMD LED site light with a frosted lens. Made from shockproof plastic and Supplied with 3 metres of cable fitted with a 16A 110V plug. Each site light is fitted with a 110V 16amp power take - off socket for powering 110V power tools or daisy chaining the lamps. Fitted with a hanging hook, carry handle and tripod fixing holes. Suitable for use on building sites.

• Wattage 30W

This rechargeable COB LED worklight with powerbank has a 360-degree rotating bracket, so it can be used in a variety of positions. Features four light modes – full, low, SOS and flashing. Maximum light output is 1500 Lumens. It has a slimline foldable design for easy storage and transportation.

• Light Type COB LED
• Wattage 20W
• Lumens 1500 (full) and 750 (low)
• Light Settings Full, low, SOS, and flashing
• Power Source Built-in Lithium 3.7V
• Run-Time 2.5 hours (full) and 6 hours (low)
• Charging Time 5 hours
• Size 245 x 225 x 35mm
• Maximum height 315mm
• Weight 699g

The Faithfull Power Plus SMD LED Task Light has a highly efficient 20 Watt SMD (Surface Mounted Diode) LED that provides an extremely bright, glare-free 2,000 lumens of light output and is mounted in a heavy-duty, impact resistant case rated to *IP44/54.A mirror backed reflector improves the light output and beam spread of the work light, which also has the added benefits of an integrated power take-off socket, allowing the series linking of lamps or for use with power tools*. The lamp has a 3m x 0.75mm² cable and a built-in storage system and is fitted with an approved 240 or 110 volt plug.LED work lights have many uses around the work site or home, providing a glare free bright light that avoids the high heat output associated with halogen bulbs. These lights are cool running and eliminate the fire and burn hazards associated with halogen lighting, which make them ideal for tradesmen who are working close by. They also have the benefit of not drying out plaster or similar finishes too quickly (which can happen with the heat emitted from halogen lights) which can result in cracking.*110 Volt Version is IP54 Rated, Light Maximum Load: 6.25 amp Current (Max. 1000W), Maximum Link: 15 Lights. Total Socket Load MUST NOT Exceed 1,000 Watt.*240 Volt Version is IP44 Rated, Light Maximum Load: 6.25 amp Current (Max. 2200W), Maximum Link: 20 Lights. Total Socket Load MUST NOT Exceed 2,200 Watt.

Faithfull Power Plus SMD LED Task Light with Power Take Off 110 Volt Version.

The 110 Volt Version is IP54 Rated, Light Maximum Load: 6.25amp Current (Max 1000W), Maximum Link: 15 Lights.

Total Socket Load MUST NOT Exceed 1,000 Watt.

The Faithfull Power Plus SMD LED Task Light has a highly efficient 20 Watt SMD (Surface Mounted Diode) LED that provides an extremely bright, glare-free 2,000 lumens of light output and is mounted in a heavy-duty, impact resistant case rated to *IP44/54.A mirror backed reflector improves the light output and beam spread of the work light, which also has the added benefits of an integrated power take-off socket, allowing the series linking of lamps or for use with power tools*. The lamp has a 3m x 0.75mm² cable and a built-in storage system and is fitted with an approved 240 or 110 volt plug.LED work lights have many uses around the work site or home, providing a glare free bright light that avoids the high heat output associated with halogen bulbs. These lights are cool running and eliminate the fire and burn hazards associated with halogen lighting, which make them ideal for tradesmen who are working close by. They also have the benefit of not drying out plaster or similar finishes too quickly (which can happen with the heat emitted from halogen lights) which can result in cracking.*110 Volt Version is IP54 Rated, Light Maximum Load: 6.25 amp Current (Max. 1000W), Maximum Link: 15 Lights. Total Socket Load MUST NOT Exceed 1,000 Watt.*240 Volt Version is IP44 Rated, Light Maximum Load: 6.25 amp Current (Max. 2200W), Maximum Link: 20 Lights. Total Socket Load MUST NOT Exceed 2,200 Watt.

Faithfull Power Plus SMD LED Task Light with Power Take-Off 240 Volt Version.

The 240 Volt Version is IP44 Rated, Light Maximum Load: 6.25amp Current (Max. 2200W), Maximum Link: 20 Lights.

Total Socket Load MUST NOT Exceed 2,200 Watt.

Replacement 7.4V 5200mAh Lithium-ion (Li-ion) battery. Fits the 20W SMD LED Folding Rechargeable Light (FPPSLFOLD20W).

These LED Plasterer's Lights are energy efficient, cool running and with the added advantage of being resilient to drops and knocks that would normally break fluorescent tubes used in older models of these lamps, no more replacing worn out or broken tubes.Faithfull Plasterer's Lights are manufactured using a sturdy folding steel frame with a strong polycarbonate light housing and diffuser, making them tough and durable for everyday use. Two powerful SMD LEDs strips with a 30 watt output provide 2600 lumens of light, making them ideal for all interior and many worksite jobs as they produce a cool bright 6400K colour range light without shadowing over a wide area. The lights have two built-in power outlets for in-series linking and the integral suspension hook make these lights truly versatile when in use. The leg stand can be folded flat for transportation or space-saving storage.This light is available in 240 or 110 Volt versions, both fitted with an approved plug.

Super bright SMD LED’s IP54 rated

240V version - Maximum Load applied to the sockets should not exceed 2500 Watts allowing you to link up to 25 lights.

These LED Plasterer's Lights are energy efficient, cool running and with the added advantage of being resilient to drops and knocks that would normally break fluorescent tubes used in older models of these lamps, no more replacing worn out or broken tubes.Faithfull Plasterer's Lights are manufactured using a sturdy folding steel frame with a strong polycarbonate light housing and diffuser, making them tough and durable for everyday use. Two powerful SMD LEDs strips with a 30 watt output provide 2600 lumens of light, making them ideal for all interior and many worksite jobs as they produce a cool bright 6400K colour range light without shadowing over a wide area. The lights have two built-in power outlets for in-series linking and the integral suspension hook make these lights truly versatile when in use. The leg stand can be folded flat for transportation or space-saving storage.This light is available in 240 or 110 Volt versions, both fitted with an approved plug.

Super bright SMD LED’s IP54 rated

110V version - Maximum Load applied to the sockets should not exceed 1500 Watts allowing you to link up to 20 lights.

Faithfull Plasterer's Lights are manufactured using a sturdy tubular steel tripod stand with a strong polycarbonate light housing and diffuser, making them tough and durable for everyday use. The two powerful SMD LEDs strips with a 44W output provide 4,050 lumens of light, making them ideal for all interior and many worksite jobs as they produce a cool bright 6400K colour range light without shadowing over a wide area.

The lights have two built-in power outlets for in-series linking. The tripod stand and light housing can be folded flat for transportation or space-saving storage. These lights are energy efficient, cool running and with the added advantage of being resilient to drops and knocks that would normally break fluorescent tubes used in older models of these lamps, no more replacing worn out or broken tubes.

This light is available in 240 or 110 volt versions both fitted with an approved plug.

1 x Faithfull Power Plus LED Plasterers Tripod Light 5ft 110V 4050 Lumens

Maximum load applied to the sockets should not exceed 1500W, which allows you to link up to 12 lights.

This Faithfull inspection lamp features a 50mm wide clamp for clamping to joists, beams, under vehicle bonnets, lofts or almost anywhere. It has strong hand grips, a useful hanging hook for easy storage, and a protective wire cage around the bulb. Supplied with a 5 metre cable, approved plug, and an 800 lumen low energy 10W LED light bulb (equivalent to 60 watt incandescent lightbulb).

Replacement bulb part number:FPPSLBA6010W - 10W LED E27

The Faithfull FPPSLGRIPLE heavy-duty low energy inspection lamp has the following specifications:240 Volt

This Faithfull inspection lamp features a 50mm wide clamp for clamping to joists, beams, under vehicle bonnets, lofts or almost anywhere. It has strong hand grips, a useful hanging hook for easy storage, and a protective wire cage around the bulb. Supplied with a 5 metre cable, approved plug, and an 800 lumen low energy 10W LED light bulb (equivalent to 60 watt incandescent lightbulb).

Replacement bulb part number:FPPSLBA6010W - 10W LED E27

The Faithfull FPPSLGRIPLEL heavy-duty low energy inspection lamp has the following specifications:110 Volt

Replacement oval floodlight lens for Faithfull halogen and low energy site lights.

This Faithfull Power Plus replacement Ballast Unit is suitable for the 38 Watt Task Light.

Ballast units regulate the current and voltage supplied to a bulb when switched on and throughout operation.

Voltage: 110 Volt.

The Faithfull COB LED Single Pod Tripod Site Light features a high performance, high output, chip on board (COB) LEDs which provides a bright light with up to a 90% energy saving, compared to the equivalent light output from halogen lighting.

They have been designed for both commercial and domestic use with the added advantage of a low power consumption coupled with a cool running temperature. COB LEDs are maintenance free and more resilient to impact damage that can cause conventional halogen tubes to fail if a light is hit or knocked over.

The lamp head is manufactured from die-cast aluminium, is fully adjustable and mounted on a sturdy telescopic tripod. Two twist grip locks enable the tripod height to be quickly adjusted between 960mm and 1885mm. The tripod also features a quick release system allowing the lamp to be easily detached for use as a single pod light.

The lamp is IP65 rated for water and dust ingress protection and is fitted with an approved BS plug.

Why choose Chip on Board (COB) LED lighting instead of conventional lighting?

Long maintenance free working life of up to 100,000 hours.

Extremely energy efficient operating at 80-90% efficiency.

Highly durable resistance to shock, vibration and external impacts, ideal for outdoor and rugged lighting applications.

Low heat emission provide a safe working area free of the burn risk associated with Halogen lighting products.

LEDs emit virtually no UV radiation making them perfect for use in areas were UV light sensitive objects or materials are present.

LEDs perform well in extremely cold or hot temperatures with no loss of performance making them ideal for use outside in all weathers.

Ecologically friendly LEDs are free of toxic materials and are 100% recyclable.

Faithfull Power Plus COB LED Single Pod Tripod Site Light 2100 Lumen 30 Watt 240 Volt Version.

The Faithfull Festoon Light Set, comes on a 22 metre arctic cable supplied with 10 x ES GLS rough service bulbs (110V), each bulb is protected by a lightweight yellow plastic cage. These festoon lights will provide a very effective solution to illuminating a large area on site by hanging the lights in one room and to another across a landing, etc.

Instant light without the possibility of shadows that can be caused by using tripod lighting. Fitted with a 16 amp 110 volt plug.

Replacement bulbs are available, FPPSLBA6010W.

The Faithfull LED Festoon Light Set, comes with a 22 metre arctic cable supplied with 10 x bulbs (110V), each bulb is protected by a lightweight yellow plastic cage. These festoon lights will provide a very effective solution to illuminating a large area on site by hanging the lights in one room and to another across a landing, etc.

Instant light without the possibility of shadows that can be caused by using tripod lighting. Fitted with a 16 amp 110 volt plug.

Replacement bulbs are available, FPPSLBA6010W.

The Faithfull Replacement Battery For FPPSLLED30TB, used to provide extended run time, using an additional battery allows the battery packs to be cycled as they become exhausted and is particularly useful when no other power supply is available.

The battery can be independently charged using either the mains or car charger that is supplied with the lamp (FPPSLED30TB) and can also be recharged in the lamp when it is in use with an external power source.

The Faithfull Power Plus 7.4V 8800mAh Li-ion Battery may be used to provide extended running times for the FPPSLLED20TB Cordless LED Site Light to supply continuous illumination. This additional battery allows the battery packs to be cycled as a when they become exhausted and is particularly useful when no other power supply is available. The battery can be independently charged using either the mains or car charger and can also be recharged while the lamp is in use when a power source is available.

• Battery: 7.4V 8800mAh Li-ion
• Charging Time: Approx. 4 hours

The Faithfull Illuminator 360° LED Task Light provides a powerful 4000 lumen light output. The dome shape provides 360° of light, ideal for larger working areas where light is limited. Manufactured with the latest LED technology, this unit provides a safe and reliable light for trade professionals. Built-in carry handles and integrated cable storage allow for easy movement. The light can be mounted on the FPPTRIHD3M Heavy-Duty Tripod (available separately).

This light also features an integrated power take-off socket, allowing the linking of further units which can provide a continued light source for a larger area.

Specification:

Output: 4,000 lumensLED Power: 50WLED Type: SMDColour Range: 5,000KLED Lifetime: 50,000 hoursIP Rating: IP44Cable Length: 5m (Ø1.5mm²)

1 x Faithfull Illuminator 360° LED Task Light 110V version.

The Faithfull Illuminator 360° LED Task Light provides a powerful 4000 lumen light output. The dome shape provides 360° of light, ideal for larger working areas where light is limited. Manufactured with the latest LED technology, this unit provides a safe and reliable light for trade professionals. Built-in carry handles and integrated cable storage allow for easy movement. The light can be mounted on the FPPTRIHD3M Heavy-Duty Tripod (available separately).

This light also features an integrated power take-off socket, allowing the linking of further units which can provide a continued light source for a larger area.

Specification:

Output: 4,000 lumensLED Power: 50WLED Type: SMDColour Range: 5,000KLED Lifetime: 50,000 hoursIP Rating: IP44Cable Length: 5m (Ø1.5mm²)

1 x Faithfull Illuminator 360° LED Task Light 240V version.

The Faithfull Centaur Heavy-Duty LED Site Light has a unique design that delivers a 360° spread of light, with a mighty 16,000 lumens and a 50m beam. This floodlight is ideal for use on worksites to light up entire rooms and large outdoor areas.

The 6 light heads can be locked at either a 90° upright position or angled at 45°. They feature an anti-glare diffused lens that provides a wide spread of shadow-free light. The robust and durable housing absorbs knocks on site and is IP65 rated for water and dust ingress protection.

Its driver/operation unit can be located on the ground away from the light for ease of use. It features an on/off button and individual buttons for quick selection of 25%, 50%, 75% and 100% output modes. The driver unit has a robust casing, easy-carry handles and is rated to IP44.

Fitted with a 10m heavy-duty cable with an approved BS plug. A carry bag allows the light unit and driver to be stored safely and enables easy transportation to jobs.

This light requires a tripod, sold separately (FPPTRIHD3M).

Specification:

LED Power: 200WLumen Output: 16,000Colour Range: 5000KOutput Modes: 100%, 75%, 50%, 25%Beam Distance: 50mIP Rating: Light: IP65, Driver: IP44Cable Length: 10m

1 x Faithfull Centaur Heavy-Duty LED Site Light 110V Version

The Faithfull Centaur Heavy-Duty LED Site Light has a unique design that delivers a 360° spread of light, with a mighty 16,000 lumens and a 50m beam. This floodlight is ideal for use on worksites to light up entire rooms and large outdoor areas.

The 6 light heads can be locked at either a 90° upright position or angled at 45°. They feature an anti-glare diffused lens that provides a wide spread of shadow-free light. The robust and durable housing absorbs knocks on site and is IP65 rated for water and dust ingress protection.

Its driver/operation unit can be located on the ground away from the light for ease of use. It features an on/off button and individual buttons for quick selection of 25%, 50%, 75% and 100% output modes. The driver unit has a robust casing, easy-carry handles and is rated to IP44.

Fitted with a 10m heavy-duty cable with an approved BS plug. A carry bag allows the light unit and driver to be stored safely and enables easy transportation to jobs.

This light requires a tripod, sold separately (FPPTRIHD3M).

Specification:

LED Power: 200WLumen Output: 16,000Colour Range: 5000KOutput Modes: 100%, 75%, 50%, 25%Beam Distance: 50mIP Rating: Light: IP65, Driver: IP44Cable Length: 10m

1 x Faithfull Centaur Heavy-Duty LED Site Light 240V Version

Cordless work light useful in any workspace with integrated AC and DC power. 360° Movement with SMD LED technology for ultra-bright illumination. 96 SMD LED Lights producing up to 4000 lumens. Robust design with integrated carry handle and side lights to illuminate the darkest spaces. Simple on/off switch with two levels of brightness depending on power supply. Powered by either 20V Lithium-ion battery (not included) or 230V 50Hz 1.5 mains cable with 3-pin plug.

• Part of the SV20 Series offering a one battery fits all solution, keeping costs down without compromising on performance.
• Cordless work light useful in any workspace with integrated AC and DC power.
• 360° Movement.
• SMD LED Technology for ultra-bright illumination.
• 96 SMD LED Lights producing up to 4000 lumens.
• Powered by either 20V Lithium-ion battery (not included) or 230V 50Hz 1.5 mains cable with 3-pin plug.
• Robust design with integrated carry handle and side lights to illuminate the darkest spaces.
• Simple on/off switch with two levels of brightness depending on power supply.
• Model No. CP20VWL

• • Part of the SV20 Series offering a one battery fits all solution, keeping costs down without compromising on performance. • Cordless work light useful in any workspace with integrated AC and DC power. • 360° Movement. • SMD LED Technology for ultra-bright illumination. • 96 SMD LED Lights producing up to 4000 lumens. • Powered by either 20V Lithium-ion battery (not included) or 230V 50Hz 1.5 mains cable with 3-pin plug. • Robust design with integrated carry handle and side lights to illuminate the darkest spaces. • Simple on/off switch with two levels of brightness depending on power supply. • Model No. CP20VWL

Compact, lightweight design with a massive 1000lm output. Made with a tough ABS plastic housing with flip-out magnetic bracket that hides a small carabiner, which can be used when no ferrous surface is available. Includes USB 5V?1A output for secondary use as a power bank. Magnetic bracket can be angled at a range of 120° making it simple and easy to direct up to 1000 lumens of light. Three light output settings; full 1000lm, half 500lm and flashing. Features LED battery level indicator. Fitted with a high quality 3.7V 4.5Ah Lithium-ion battery. Charges via a micro USB lead. (Supplied with micro USB cable.)

• Compact, lightweight design with a massive 1000lm output.
• Made with a tough ABS plastic housing with flip-out magnetic bracket that hides a small carabiner, which can be used when no ferrous surface is available.
• Includes USB 5V?1A output for secondary use as a power bank.
• Magnetic bracket can be angled at a range of 120° making it simple and easy to direct up to 1000 lumens of light.
• Three light output settings; full 1000lm, half 500lm and flashing.
• Features LED battery level indicator.
• Fitted with a high quality 3.7V 4.5Ah Lithium-ion battery.
• Operating Time: 4hr.
• Charging Time: 3.5hr.
• Charges via a Micro USB lead. (Supplied with micro USB cable.)
• Model No. LED1000PB

• • Compact, lightweight design with a massive 1000lm output. • Made with a tough ABS plastic housing with flip-out magnetic bracket that hides a small carabiner, which can be used when no ferrous surface is available. • Includes USB 5V?1A output for secondary use as a power bank. • Magnetic bracket can be angled at a range of 120° making it simple and easy to direct up to 1000 lumens of light. • Three light output settings
• full 1000lm, half 500lm and flashing. • Features LED battery level indicator. • Fitted with a high quality 3.7V 4.5Ah Lithium-ion battery. • Operating Time: 4hr. • Charging Time: 3.5hr. • Charges via a Micro USB lead. (Supplied with micro USB cable.) • Model No. LED1000PB

3-in-1 Function floodlight made of a strong nylon plastic with thermoplastic rubber edges for durability. Features an ultra bright 20W COB LED light producing up to 1100 lumens with three light settings: High 1100lm, Mid 580lm, Low 350lm (working time: 3, 5 and 15 hours respectively). Work light also includes two good quality wireless speakers which can be easily linked to your tablet or smartphone. Fixed to the rear is a sturdy 180° adjustable stand which can also be used as a carry handle. Has four strong magnets on the back for easy mounting to metal applications such as a tool chest. Built-in power bank with a USB output and LED charge indicator. Micro USB charging lead included.

• 3-in-1 Function floodlight made of a strong nylon plastic with thermoplastic rubber edges for durability.
• Features an ultra bright 20W COB LED light producing up to 1100 lumens with three light settings: High 1100lm, Mid 580lm, Low 350lm (working time: 3, 5 and 15 hours respectively).
• Work light also includes two good quality wireless speakers which can be easily linked to your tablet or smartphone.
• Fixed to the rear is a sturdy 180° adjustable stand which can also be used as a carry handle.
• Four strong magnets on the back for easy mounting to metal applications such as a tool chest.
• Built-in power bank with a USB output and LED charge indicator.
• Micro USB charging lead included.
• Model No. LED100WS.

Portable floodlight with adjustable head, housed within a stable steel frame. Features 30 super bright SMD LEDs, giving a full 120° spread of light. Weatherproof design with an on/off rocker switch and two light settings. Built-in 7.4V 4Ah Li-ion rechargeable battery. Supplied with a UK plug, mains charger and 12V in-car charger. Suitable for lighting workshops, garages and other environments where no mains supply is available.

Incredibly tough aluminium housing with sturdy handle which can rotate through 360°. Virtually indestructible and one of the most durable floodlights available. Also fitted with a strong magnet, making it simple and easy to direct up to 1400 lumens of light. Three light output settings 350/700/1400 lumens. Features three LED battery level indicator. Fitted with a high quality 3.7V 5.2Ah Lithium-ion battery. Charges via a USB Type-C lead. (Supplied with USB Type-C Cable).

• Incredibly tough aluminium housing with sturdy handle which can rotate through 360°.
• Virtually indestructible and one of the most durable floodlights available.
• Also fitted with a strong magnet, making it simple and easy to direct up to 1400 lumens of light.
• Three light output settings: 350/700/1400 lumens.
• Features three LED battery level indicator.
• Fitted with a high quality 3.7V 5.2Ah Lithium-ion battery.
• Charges via a USB Type-C lead (Supplied with USB Type-C Cable).
• Model No. LED1400P

Die-cast aluminium housing with integral 180° adjustable stand. COB LED technology allows ultra-bright illumination. Power switch has three brightness settings (low, medium and high) allowing it to produce up to 1900 lumens. Features battery level indicator and a 5V-1A USB output for charging electronic devices. Supplied with USB charging lead.

• Aluminium housing.
• Integral 180° adjustable stand.
• On/off (economy setting) switch.
• COB LED technology allows ultra-bright illumination.
• USB 5V-1A output for charging electronic devices.
• Battery level indicator.
• Three brightness settings producing up to 1900 lumens.
• Supplied with USB charging lead.
• IPX5 Rated.
• Model No. LED184

Heavy-duty robust design with integral carry handle and 180° stand for positioning of light and substantial stability. SMD LED technology site light for ultra bright illumination. Simple on/off weatherproof switch on reverse of light. Cable strap to keep cable tidy when not in use. Cable gland fitted to entry of the light to provide good protection of the cable. Supplied with 110V 16A plug.

• Heavy-duty robust design.
• Integral carry handle and 180° stand.
• 24W 64 SMD LED producing 2500 lumens for ultra bright illumination.
• Simple on/off weatherproof switch.
• Cable strap to keep cable tidy when not in use.
• Cable gland on entry to the light to provide good protection of the cable.
• Supplied with 110V 16A plug.
• Model No. LED24110

Heavy-duty robust design with integral carry handle and 180° stand for positioning of light and substantial stability. SMD LED technology site light for ultra bright illumination. 24W 64 SMD LED producing 2500 lumens. Simple on/off weatherproof switch on reverse of light. Cable strap to keep cable tidy when not in use. Cable gland fitted to entry of the light to provide good protection of the cable. Supplied with 3-pin plug.

• Heavy-duty robust design.
• Integral carry handle and 180° stand.
• 24W 64 SMD LED producing 2500 lumens for ultra bright illumination.
• Simple on/off weatherproof switch.
• Cable strap to keep cable tidy when not in use.
• Cable gland on entry to the light to provide good protection of the cable.
• Supplied with 3-pin plug.
• Model No. LED24230

Features patented 360° swivel and tilt function enabling light source to be positioned in any direction. Work light houses 72 super bright SMD LEDs providing up to 3000 lumens. Features high quality 4.4Ah Lithium-ion battery with battery level indicator. 2.1A USB output for use as a powerbank. Supplied with mains charger.

• Features patented 360° swivel and tilt function enabling light source to be positioned in any direction.
• Work light houses 72 super bright SMD LEDs providing up to 3000 lumens.
• Provides a powerful light to any work area.
• Features high quality 4.4Ah Lithium-ion battery with battery level indicator.
• 2.1A USB output for use as a powerbank.
• Supplied with mains charger.
• Model No. LED360FR

Heavy-duty robust design with integral carry handle and 180° stand for positioning of light and substantial stability. SMD LED technology site light for ultra bright illumination. 48W 120 SMD LED producing 5000 lumens. Simple on/off weatherproof switch on reverse of light. Cable strap to keep cable tidy when not in use. Cable gland fitted to entry of the light to provide good protection of the cable. Supplied with 110V 16A plug.

• Heavy-duty robust design.
• 48W 120 SMD producing 5000 lumens allowing ultra bright illumination.
• Integral carry handle and 180° stand.
• Simple on/off weatherproof switch.
• Cable strap to keep cable tidy when not in use.
• Cable gland on entry to the light to provide good protection of the cable.
• Supplied with 110V 16A plug.
• Model No. LED48110