Carbotec Epoxide Epoxy Resin Board is ideal for constructing fixings, chassis, facings, etc. The sheet can be easily worked using normal tools.

• Thickness 0.5mm
• Sheet size 350 x 150mm

This 3mm thick translucent acrylic sheet can be easily cut with a fret saw and glued with the adhesive provided.

• Size: 100 x 200mm
• Colour: Clear
• Thickness: 3mm

This 3mm thick translucent acrylic sheet can be easily cut with a fret saw and glued with the adhesive provided.

• Size: 150 x 50mm
• Colour: Clear
• Thickness: 3mm

Polypropylene corrugated board is often referred to by the trade names Corriflute or Correx. It is a lightweight, tough material, which is easy to cut using a craft knife.

The material can be joined using a wide variety of techniques, from gluing and stitching, through to fastening with click rivets or Corri-Joiners.

• Sheets have large internal channels offering good rigidity
• Sheets are 605 x 605 x 4mm
• Pack contains 4 each of black, blue, green, yellow and red
• Supplied in an assorted coloured pack of 20 sheets

Joiners for use with 4mm corrugated plastic sheet material.

• The joiners simply push-fit into the flutes of the sheet, to produce butt joints and right-angle joints, and for fixing axles, etc.
• Supplied in packs of 10 sets (100 joiners)
• For use with order code 37-3325

Polypropylene corrugated board is often referred to by the trade names Corriflute or Correx. It is a lightweight, tough material, which is easy to cut using a craft knife.

The material can be joined using a wide variety of techniques, from gluing and stitching, through to fastening with click rivets or Corri-Joiners.

• Sheets have large internal channels, offering good rigidity
• They also allow click rivets to be used for jointing
• Convenient pack size allows ease of storage and handling
• Pack contains 2 each of black, blue, green, yellow and red
• Supplied in an assorted coloured pack of 10 sheets

Foam PVC is an excellent rigid material for the construction of student project work. It is a cheaper, lighter, and a more versatile alternative to acrylic and MDF. It is often referred to by the trade names of komacel or foamex. Foam PVC can be drilled and shaped with ease. Its ability to be thermoformed means that students can vacuum-form and line-bend the material to create their designs. Foam PVC can be joined by a variety of methods. It can be glued using solvent or contact adhesives. Double-sided tape makes an excellent alternative to gluing, since it also allows the joint to be separated at a later stage.

• 3mm thickness
• Each pack contains 10 sheets, approximately 605mm²
• Popular bright primary colours (black, blue, green, yellow and red)
• Easy-to-manage pack size for handling and storage in the workshop

Pack of 10 High Impact Polystyrene (HIPS) sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 red coloured plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 2mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Neoprene is an EVA foam based product, great for art, collage and sculpture.

• Single sheet, black
• Sheet size 250 x 300mm
• Thickness 2mm

Neoprene is an EVA foam based product, great for art, collage and sculpture.

• Assorted plain pack of 10 sheets
• Sheet size 250 x 300mm
• Thickness 2mm

Pack of 10 black coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 blue coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 green coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 red coloured plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 white coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 yellow coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 clear plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 black plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Tolerance ±1.5mm
• Virgin grade for consistency of moulding
• Supplied in pack of 10 sheets

Pack of 10 blue coloured plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 green coloured plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 white plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Tolerance ±1.5mm
• Virgin grade for consistency of moulding
• Supplied in pack of 10 sheets

Pack of 10 clear plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1.5mm
• Tolerance ±1.5mm
• Virgin grade for consistency of moulding
• Supplied in pack of 10 sheets

A pack of 10 black plastic sheets measuring 900 x 600mm. The sheets can be used as conventional flat material, or for economic use in vacuum-forming machines.

• Thickness 1.5mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in packs of 10 sheets

Pack of 10 black coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 blue coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 clear plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Tolerance ±1.5mm
• Virgin grade for consistency of moulding
• Supplied in pack of 10 sheets

Pack of 10 green coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 red coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 white coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Tolerance ±1.5mm
• Virgin grade for consistency of moulding
• Supplied in pack of 10 sheets

Pack of 10 yellow coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 black coloured plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Tolerance ±1.5mm
• Virgin grade for consistency of moulding
• Supplied in pack of 10 sheets

Pack of 10 blue coloured plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 green coloured plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 yellow coloured plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 clear plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Tolerance ±1.5mm
• Virgin grade for consistency of moulding
• Supplied in pack of 10 sheets

Pack of 10 white coloured plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 1mm
• Tolerance ±1.5mm
• Virgin grade for consistency of moulding
• Supplied in pack of 10 sheets

Pack of 10 black plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 2mm
• Tolerance ±1.5mm
• Virgin grade for consistency of moulding
• Supplied in pack of 10 sheets

Pack of 10 blue coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 2mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 red coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 2mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 green coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 2mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 yellow coloured plastic sheets measuring 457 x 254mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 2mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Pack of 10 yellow coloured plastic sheets measuring 457 x 305mm. Sheets can be used as conventional flat material, or for economic use in vacuum forming machines. These sheets offer a cost-effective method for students to prototype designs prior to manufacture in a thicker material.

• Thickness 2mm
• Virgin grade for consistency of moulding
• Tolerance ±1.5mm
• Supplied in pack of 10 sheets

Modelcraft Clear Polycarbonate Sheet 400 x 500 x 0.75mm can be bent when cold, and shaped or deep drawn when heat is applied. Ideal for cabin glazing or any type of glazing.

Modelcraft Clear Polycarbonate Sheet 400 x 500 x 1.5mm can be bent when cold, and shaped or deep drawn when heat is applied. Ideal for cabin glazing or any type of glazing.

Modelcraft Clear Polycarbonate Sheet 400 x 500 x 1mm can be bent when cold, and shaped or deep drawn when heat is applied. Ideal for cabin glazing or any type of glazing.

Modelcraft Clear Polycarbonate Sheet 400 x 500 x 2mm can be bent when cold, and shaped or deep drawn when heat is applied. Ideal for cabin glazing or any type of glazing.

This Modelcraft White Polystyrene Sheet is ideal for a wide range of applications and can be shaped by applying heat (e.g., by using a hot hair dryer or heat gun).

• Thickness 0.5mm
• Sheet size 330 x 230mm

This Modelcraft White Polystyrene Sheet is ideal for a wide range of applications and can be shaped by applying heat (e.g., by using a hot hair dryer or heat gun).

• Thickness 1.5mm
• Sheet size 330 x 230mm

This Modelcraft White Polystyrene Sheet is ideal for a wide range of applications and can be shaped by applying heat (e.g., by using a hot hair dryer or heat gun).

• Thickness 1mm
• Sheet size 330 x 230mm