Lifts open or closed, loaded, steel drums with the aid of an overhead hoist. Keeps drum in vertical position reducing spillage. Heavy-duty steel construction. Suitable for use with 205L drums.

Simple mechanical feature allows drums to be picked up, relocated and released without leaving the driving position. Secures tightly to forklift arms using hand screws. Heavy-duty steel construction. Suitable for use with 205L drums.

Less manual effort required as hydraulic ram clamps drum, then raises it off the ground for simple manoeuvring and relocation. Cradle is fitted with two smooth-rolling, heavy-duty wheels and one castor with brake. Suitable for 205L drums.

• Hydraulic ram clamps drum, then raises it off the ground.
• Simple manoeuvring and relocation.
• Cradle is fitted with two smooth-rolling, heavy-duty wheels and one castor with brake.
• Suitable for 205L drums.
• Model No. DH01

Ideal for manoeuvring, relocating and draining fully loaded drums. Lever handle raises drum in stages with fingertip operated locks. Adjustable for reach/leverage and clamp height. Clips on both sides hold drum secure in vertical or horizontal positions. Drum can be manually adjusted and held at any angle or, if contents need mixing, can be turned end-over-end. Fitted with two smooth rolling, heavy-duty wheels and one castor with brake. Suitable for 205L drums.

Ideal for loading and unloading barrel bunds, vans and general drum handling when forklift is not available. Suitable for 205L drums. Foot operated hydraulics, side handles and smooth-rolling wheels aid handling and manoeuvrability.

Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.

Allows safe storage of 205L drums in the horizontal position for quick dispensing of contents. Radiused frame helps up-end drums.

Polythene constructed tap with 3/4"BSP thread and neoprene washer.

Self-closing safety drum tap with brass plated alloy body. Features built-in flame arrestor for dispensing flammable or non-flammable liquids. Steel handle can be padlocked closed. Fitted with 3/4"BSP thread.

Brass body and nickel plated drum tap with hose tail outlet suitable for use with extension hoses. Fitted with 1/2"BSP thread and supplied with 3/4"BSP adaptor. Needs only half turn of handle to open or close tap.

Polyethylene drum tap with 2"BSP thread, fitted with EPT gasket. Features padlock hole, hanging hook for buckets and port for installing a sight glass. Large bore drains drums quickly and easily.

Polythene constructed drum tap with 3/4"BSP thread.

Easy and cost effective method of determining level of fluid in a 205L drum. Fitted with a 3/4"BSP thread which screws directly onto the smaller hole on 205L drums, leaving the 2"BSP thread free for installing pumps. Indicator face is marked from 0-210 litres. Unit is fitted with a water filled polyethylene float allowing the indicator to be used with a variety of fluids. Note: TP129 is not a precise measuring device, unit is for indication purposes only.

• �Easy and cost effective method of determining level of fluid in a 205L drum.
• Fitted with a 3/4"BSP thread which screws directly onto the smaller hole on 205L drums, leaving the 2"BSP thread free for installing pumps.
• Indicator face is marked from 0-210 litres.
• Unit is fitted with a water filled polyethylene float allowing the indicator to be used with a variety of fluids.
• Note: TP129 is not a precise measuring device, unit is for indication purposes only. �Model No. TP129

Rigid steel construction suitable for safe movement and storage of steel and plastic barrels. Cradle fitted with two, smooth rolling, heavy-duty, Ø150mm wheels and one Ø75mm castor. Two-position handle locks upright or at 45° and features tools for five different drum caps and a metal drum tilting attachment.

Manufactured from hardened and tempered cast aluminium for increased strength. Designed to fit most 2"BSP and 3/4"BSP drum plugs.

• Manufactured from hardened and tempered cast aluminium for increased strength.
• Designed to fit most 2"BSP and 3/4"BSP drum plugs.
• Model No. TP130

Transport drums quickly and safely on four large metal castors. Wheel positioning ensures even weight distribution enabling easier manoeuvrability. Suitable for use with 205L drums.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and 56mm drum closure diameter fitting.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and 64mm drum closure diameter fitting.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and 69mm drum closure diameter fitting.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and 58mm drum closure diameter fitting.

Polypropylene drum adaptor. Manufactured with 2"BSP thread and 61mm drum closure diameter fitting.