Plastic folding step stool with anti-slip grips on the top. Folds flat for easy storage. Height 235mm. Maximum capacity of 125kg. Sold loose with display label.

Universal stand off compatible with Draper and other manufacturers ladders. Fitted with locking spring and anti slip rubber pads for ladder stability while in use. Display packed.

• Stand off width 640mm
• Stand off from wall to ladder 340mm
• Ladder bracket width 205mm
• Ladder bracket height 340mm

Easy way of securing ladders and steps to car roof racks. Cross beams clamp ladders securely to roof rack by simple spinner handles. Quick and easy tool-free installation. Lock holes for additional security if a padlock is required. Display packed.

Universal ladder lock giving a practical system for the safe, convenient and secure storage of most ladders. Hooks come complete with a locking bar for additional security if a padlock is required. Two brackets are approximately 225 x 170mm. Display packed.

Two level, with spring suspension with instant set down once weight is applied. Three castor wheels. Display carton.GS and TUV Approved

2 step Aluminium working platform, with a riveted Aluminium construction. Securely attached to a hinged and sprung locking clip, enabling easy storage and transportation. Shrink wrapped with display card.

• Maximum load ... 150kg
• Platform height ... 470mm
• Platform area ... 600 x 600mm
• Footprint spread ... 965 x 700mm

3 step Aluminium working platform, with a riveted Aluminium construction. Securely attached to a hinged and sprung locking clip, enabling easy storage and transportation. Shrink wrapped with display card.

• Maximum load 150kg
• Platform height 730mm
• Platform area 1000 x 300mm
• Footprint spread 1610 x 440mm

Expert Quality, high strength non-conductive frame, fibreglass stepladders. Manufactured to EN 131 Professional standards. The lightweight frame fitted with deep ridged aluminium treads for extra grip and each ladder has non-slip rubber feet providing added stability when in use. Sold loose.

• Maximum load 150kg
• Open height 1615mm (approx.)
• Spread 1275mm (approx.)
• Closed length 1800mm (approx.)
• Weight 8.7kg

Expert Quality, high strength non-conductive frame, fibreglass stepladders. Manufactured to EN 131 Professional standards. The lightweight frame fitted with deep ridged aluminium treads for extra grip and each ladder has non-slip rubber feet providing added stability when in use. Sold loose.

• Maximum load 150kg
• Open height 2170mm (approx.)
• Spread 1.669mm (approx.)
• Closed length 2400mm (approx.)
• Weight 11.6kg

Clamping kit for safely securing ladders for transportation or storage.

The Faithfull 'Step Up' is a useful work platform which is ideal for painting and decorating. It is also suitable for reaching most domestic ceilings and upper walls.Manufactured from aluminium, the 'Step Up' is lightweight and easy to move, sturdy and safe to use, with a working load of 150kg. It is fitted with two leg locks and has non-slip top and anti-skid feet for added safety.

The folding legs provide for space saving storage and allow the 'Step Up' to fit easily into a van or car boot for transportation.

Dimensions: Height: 52cm (20.5in). Length: 100cm (39.5in). Width: 30cm (12in).

Aluminium extension ladder manufactured to EN 131 standards. Ideal for the tradesman, this ladder can be used as a three section or two section extension and as a single ladder, which is ideal for two-man use. Can be used as a step and extension step ladder where stability and height are needed. Compact size for easy handling and storage.

Aluminium extension ladder manufactured to EN 131 standards. Ideal for the tradesman, this ladder can be used as a three section or two section extension and as a single ladder, which is ideal for two-man use. Can be used as a step and extension step ladder where stability and height are needed. Compact size for easy handling and storage.

Aluminium extension ladder manufactured to EN 131 standards. Ideal for the tradesman, this ladder can be used as a three section or two section extension and as a single ladder, which is ideal for two-man use. Can be used as a step and extension step ladder where stability and height are needed. Compact size for easy handling and storage.

EN 131 Certified four-way, four-section, aluminium ladder with mechanically swaged joints. Six robust auto-latching locking hinges allow for multi-positioning. Can be used as a platform, straight ladder, step ladder or offset ladder. Extra safety provided by twelve reinforced rungs and stabiliser feet. Fitted with extendable legs providing increased climbing height. Supplied with metal platform to use in platform/scaffold position.

EN 131 Certified four-way, four-section, aluminium ladder with mechanically swaged joints. Six robust auto-latching locking hinges allow for multi-positioning. Can be used as a platform, straight ladder, step ladder or offset ladder. Extra safety provided by twelve reinforced rungs and stabiliser feet. Fitted with extendable legs providing increased climbing height. Supplied with metal platform to use in platform/scaffold position.

EN 131 Certified four-way, four-section, aluminium ladder with mechanically swaged joints. Can be used as a straight ladder, step ladder, offset ladder and extension ladder. Fitted with two robust auto latching locking hinges for multi-positioning. Features extendable legs providing increased climbing height.

EN 131 Approved folding and portable aluminium platform with 150kg capacity. Large, ribbed non-slip platform and treads for safe and easy manoeuvrability. Durable aluminium alloy frame with ribbed feet provides extra stability. Safety locking catches on legs. Folds flat for easy storage and transportation.

EN 14183 Approved 150kg capacity step ladder professionally manufactured with brushed aluminium frame. Features large steps fitted with anti-slip rubber inserts and a large top step for added stability when working at height. Ladder folds down flat for easy storage and transportation. Fitted with four rubber feet for added stability.

EN14183 Approved 150kg capacity step ladder professionally manufactured with brushed aluminium frame. Features large steps fitted with anti-slip rubber inserts and a large top step for added stability when working at height. Ladder folds down flat for easy storage and transportation. Fitted with four rubber feet for added stability.

EN 14183 Approved 150kg capacity step ladder professionally manufactured with brushed aluminium frame. Features large steps fitted with anti-slip rubber inserts and a large top step for added stability when working at height. Ladder folds down flat for easy storage and transportation. Fitted with four rubber feet for added stability.

EN 131 Approved four-way scaffold ladder. Two six rung aluminium ladders can be used as extending ladder, single ladders, step ladder or complete scaffolding unit. Supplied with hand rail.

EN 14183 Approved steps with 150kg capacity. Tubular metal construction with composite feet for added stability. Features two large anti-slip treads. Foam-cushioned hand rail for added comfort. Suitable also as a stool.

EN 131 Certified aluminium step ladder with 150kg capacity. Durable lightweight anodised aluminium alloy frame weighs just 3.7kg. 80mm Deep non-slip steps and 250mm wide platform with safety rail allow plenty of leg room for safe standing. Ribbed feet give full floor contact for extra stability.

EN 131 Certified aluminium step ladders with 150kg capacity. Durable lightweight anodised aluminium alloy frame. 80mm Deep non-slip steps and 250mm wide platform with safety rail allow plenty of legroom for safe standing. Ribbed feet give full floor contact for extra stability.

EN 131 Certified aluminium step ladders with 150kg capacity. Durable lightweight anodised aluminium alloy frame. 80mm Deep non-slip steps and 250mm wide platform with safety rail allow plenty of legroom for safe standing. Ribbed feet give full floor contact for extra stability.

Manufactured from a hard-wearing rubber compound, which grips on the smoothest of surfaces. Prevents ladders from slipping and/or sinking into soft ground during use. Helps protect flooring on delicate surfaces. Overall width of 960mm makes this suitable for use with all popular ladders.

Extends and locks rung-by-rung allowing use at multiple heights. Soft close design means each rung retracts slowly and safely, reducing the risk of trapped fingers. Closed height of 720mm for easy storage and transportation make this ideal for surveyors, tradesmen and domestic use. Lightweight, corrosion resistant aluminium frame. Rubber feet offer increased stability while in use. Manufactured to EN 131 with 150kg capacity.

• Min./Max. Height: 720/2630mm.
• Extends and locks rung-by-rung allowing use at multiple heights.
• Closed height of 720mm for easy storage and transportation make this ideal for surveyors, tradesmen and domestic use.
• Soft close design means each rung retracts slowly and safely, reducing the risk of trapped fingers.
• Lightweight, corrosion resistant aluminium frame.
• Rubber feet offer increased stability while in use.
• Manufactured to EN 131 with 150kg capacity.
• Certified for professional use.
• Weight: 8kg.
• Model No. ATL09

Extends and locks rung-by-rung allowing use at multiple heights. Soft close design means each rung retracts slowly and safely, reducing the risk of trapped fingers. Closed height of 820mm for easy storage and transportation make this ideal for surveyors, tradesmen and domestic use. Lightweight, corrosion resistant aluminium frame. Rubber feet offer increased stability while in use. Manufactured to EN 131 with 150kg capacity.

• Min./Max. Height: 820/3270mm.
• Extends and locks rung-by-rung allowing use at multiple heights.
• Closed height of 820mm for easy storage and transportation make this ideal for surveyors, tradesmen and domestic use.
• Soft close design means each rung retracts slowly and safely, reducing the risk of trapped fingers.
• Lightweight, corrosion resistant aluminium frame.
• Rubber feet offer increased stability while in use.
• Manufactured to EN 131 with 150kg capacity.
• Certified for professional use.
• Weight: 11.3kg.
• Model No. ATL11

Extends and locks rung-by-rung allowing use at multiple heights. Soft close design means each rung retracts slowly and safely, reducing the risk of trapped fingers. Closed height of 910mm for easy storage and transportation make this ideal for surveyors, tradesmen and domestic use. Lightweight, corrosion resistant aluminium frame. Rubber feet offer increased stability while in use. Manufactured to EN 131 with 150kg capacity.

• Min./Max. Height: 910/3810mm.
• Extends and locks rung-by-rung allowing use at multiple heights.
• Closed height of 910mm for easy storage and transportation make this ideal for surveyors, tradesmen and domestic use.
• Soft close design means each rung retracts slowly and safely, reducing the risk of trapped fingers.
• Lightweight, corrosion resistant aluminium frame.
• Rubber feet offer increased stability while in use.
• Manufactured to EN 131 with 150kg capacity.
• Certified for professional use.
• Weight: 15.3kg.
• Model No. ATL13

BS 2037 Class 1 approved professional industrial aluminium platform steps. Rigid box section aluminium with heavy-duty cross brace for extra strength and stability. Double riveted extra large non-slip treads. Wide platform and high safety rail allow plenty of leg room for safe standing. Made in UK.

BS 2037 Class 1 approved professional industrial aluminium platform steps. Rigid box section aluminium with heavy-duty cross brace for extra strength and stability. Double riveted extra large non-slip treads. Wide platform and high safety rail allow plenty of leg room for safe standing. Made in UK.

BS 2037 Class 1 approved professional industrial aluminium platform steps. Rigid box section aluminium with heavy-duty cross brace for extra strength and stability. Double riveted extra large non-slip treads. Wide platform and high safety rail allow plenty of leg room for safe standing. Made in UK.

BS 2037 Class 1 approved professional industrial aluminium platform steps. Rigid box section aluminium with heavy-duty cross brace for extra strength and stability. Double riveted extra large non-slip treads. Wide platform and high safety rail allow plenty of leg room for safe standing. Made in UK.

Heavy-duty fibreglass sides with slip resistant aluminium treads. Locking brace bars and anti-slip feet for added stability. Lightweight steps are non-conductive and ideal for site work. Certified to EN 131 standards.

Heavy-duty fibreglass sides with slip resistant aluminium treads. Locking brace bars and anti-slip feet for added stability. Lightweight steps are non-conductive and ideal for site work. Conforms to EN 131 standards.

Heavy-duty fibreglass sides with slip resistant aluminium treads. Locking brace bars and anti-slip feet for added stability. Lightweight steps are non-conductive and ideal for site work. Certified to EN 131 standards.

Steel construction with heavy non-slip rubber treads. Three spring-loaded wheels allow step to glide over floor, yet sit down firmly on rubber stops when load is applied.

Robust composite construction with non-slip surface. Three spring-loaded wheels allow step to glide over floor, yet sit down firmly on rubber stops when load is applied.

Robust, lightweight platform safety step featuring a large 390 x 390mm step surface area. Features four-way access and anti-slip strips to aid stability when in use. Fitted with four non-slip pads on each corner to prevent movement when in use. Unit is brightly coloured and due to its angled design will not tip over, even when weight is on the edges making this model safe to work on.

Safe and easy way to stabilise your ladder on even or uneven surfaces. Yellow phosphate finish for added corrosion resistance. Suitable for trades where ladders need to be used for on-site applications. Features heavy-duty metal feet fitted with non-slip rubber pads for added grip and four eyelets for pegging to ground (pegs not included). Tray is adjustable for angle and includes an integral tie down to secure ladder. Increases ladder footprint from 26cm² to 3097cm². Made in the UK.

Aluminium framed stand-off, fits to any ladder. Offers superb stability at the top of a ladder with a wide span of 1000mm. Positions ladder 360mm away from work area. Fitted with rubber feet to help prevent slipping. Supplied with easy installation instructions.

Safe and easy way to access a roof with your ladder. Lightweight aluminium design. Suitable for trades where ladders need to be used for on-site applications. Features non-slip composite wheel and 'r'-shape hooks with anti-slip rubber feet. Made in the UK.

Heat-treated aluminium framed ladder stand-off improves stability and fits to any ladder. The "V" Type design can be used on flat surfaces, corners or over down pipes. Fitted with rubber feet to prevent slipping and positions ladder 250-400mm away from wall. Quick and easy to assemble.

Aluminium loft ladder manufactured to BS 14975:2006. Supplied with hand rail and all fixing components for quick and easy installation. Three-section design enables ladder to fit in smaller areas than standard two-section ladders.

Universal fitment for roof racks providing a safe and easy way to secure ladders. Yellow phosphate finish for added corrosion resistance. Suitable for trades where ladders need to be transported safely for on-site applications. Supplied with two heavy-duty iron padlocks for security. Made in the UK.

EN 1004 Approved Scaffold Tower System designed to meet the UK PASMA T3 standards. Robust aluminium frame unit with durable corrosion resistance. Heavy-duty platform with trap door for safe access to platform. Can be used as a 3m or 3.8m working height platform by fitting extension kit supplied with the unit. Unique design enables the unit to be quickly and easily folded down without tools for transportation or storage. 860mm Depth means unit will pass through most doorways even when partly erected. Hand rails for comfort and safety. Four large Ø125mm castors for easy mobility.

Extension kit for SSCL1, increases platform height to 3.5m and working height to 5.5m. Supplied with stability legs to secure unit and extra trap door platform. Manufactured from robust aluminium with anodized finish for durable corrosion resistance.

Extension kit to be used with SSCL1 & SSCL3, further increases platform height to 5.15m and working height to 7.15m. Constructed from robust aluminium with anodized finish for durable corrosion resistance.

Heavy-duty wheel step gives safe and easy access to engine or top of vehicle, ideal for 4x4s. Heavy gauge all steel construction folds for easy storage. Suitable for wheel diameters between 14" and 20" and will fit tyres up to 10" deep. Rubber topped platform for added grip and safety. Platform is height adjustable (three mounting points 90mm apart).