Diffusers suitable for use with the Draper Plasma Torch, Stock No. 49262.

• Supplied in packs of 2
• Draper type 76868

Medium electrodes for use with the Draper Plasma Torch, Stock No. 49262.

• Supplied in packs of 10
• Draper type 76869

Medium nozzles 0.8mm suitable for use with the Draper Plasma Torch, Stock No. 49262.

• Supplied in packs of 10
• Draper type 76873

Safety caps suitable for use with the Draper Plasma Torch, Stock No. 49262.

• Supplied in packs of 4
• Draper type 76879

This plasma cutter features microprocessor-controlled inverter technology making it suitable for cutting any electrically conductive material. It is a robust machine with an integrated air regulator and built-in water trap. Features thermal overload protection. Supplied with an earth clamp, chipping hammer with wire brush and face mask.

• Contents:
• 1 x Plasma torch
• 1 x Earth clamp (2m cable)
• 1 x Chipping hammer with wire brush
• 1 x Mask

Easy to use induction heater, operated by simply installing the appropriate coil type and placing over or around the ferrous metal for heating. Induction heaters are safer and more economical to use than brazing torches or welding/heating techniques. It is designed for use by professional technicians in garages, workshops and engineering facilities. This induction heater is portable and supplied in a carry case with four different shaped coils.

• Contents:
• 1 x 19mm Direct coil
• 1 x 26mm Direct coil
• 1 x Flex coil
• 1 x Pad coil

Expert Quality, high powered, high specification, liquid cooled industrial induction heater. Designed for industrial workshops where controlled, safe and efficient heating of ferrous and some non-ferrous metals is required. Attached with a precise focusing tip for accurate work and fully adjustable, computer controlled, three heating modes. An ability to link, via the universal remote control software with external digital or analogue systems enable the user to utilise the control software to the maximum, whilst the quiet cooling internal fan assisted radiators allow continuous use. These features enable the user to replace dangerous and difficult to control oxy-acetylene gas heating with simple to use, but highly effective, electrical induction heating.

• Input power 3.5kW
• Operating frequency 20 - 60kHz
• Voltage supply 230V 50/60Hz
• Max current 16A
• Output power 3kW (16A supply)
• Liquid tank 1.5L
• Dimensions 430 x 200 x 200mm
• Weight 14.6kg approx

Expert Quality, easy to use induction heater, operated by simply installing the appropriate coil type and place over or around the ferrous metal you wish to heat. Each kit is Supplied with a hardwearing carry case and four different shaped coils, delivering flexibility of use. When compared against braziers or welding/heating techniques, induction heaters are far safer and economic, as they don't use a naked flame and you save on gas bottle hire. Display packed.

• Contents:
• 1 x 19mm Direct coil
• 1 x 26mm Direct coil
• 1 x Flex coil
• 1 x Pad coil