This 2mm thick black ESD conductive matting has excellent heat and chemical resistance and is ideal for laying on workbenches.

The mat is supplied fitted with two 10mm press studs, on the short side, for connecting grounding cords, wrist straps, etc.

• Dimensions: 1200 x 550mm
• 2mm thick, smooth, black conductive rubber
• For use where heat or chemical resistance is needed
• Suitable for laying on workbenches
• Surface resistivity: 10³ to 10⁶Ω
• Temperature resistance: max. 130°C
• Static decay (5000 to 500V): <0.01s
• Fitted with two 10mm male press studs
• Antistat type 082-0002F

This 2mm thick black ESD conductive matting has excellent heat and chemical resistance and is ideal for laying on workbenches.

The mat is supplied fitted with four 10mm press studs, one on each corner, for connecting grounding cords, wrist straps, etc.

• Dimensions: 700 x 500mm
• 2mm thick, smooth, black conductive rubber
• For use where heat or chemical resistance is needed
• Suitable for laying on workbenches
• Surface resistivity: 10³ to 10⁶Ω
• Temperature resistance: max. 130°C
• Static decay (5000 to 500V): <0.01s
• Fitted with four 10mm male press studs
• Antistat type 082-0002F2

This 2mm thick black ESD conductive matting has excellent heat and chemical resistance and is ideal for laying on workbenches.

The mat is supplied fitted with four 10mm press studs, one on each corner, for connecting grounding cords, wrist straps, etc.

• Dimensions: 2400 x 1100mm
• 2mm thick, smooth, black conductive rubber
• For use where heat or chemical resistance is needed
• Suitable for laying on workbenches
• Surface resistivity: 10³ to 10⁶Ω
• Temperature resistance: max. 130°C
• Static decay (5000 to 500V): <0.01s
• Fitted with four 10mm male press studs
• Antistat type 082-0002F5

This smooth-textured anti-static mats from Antistat measures 600 x 1200mm and is designed to be laid out in workshops, laboratories or any other areas used for ESD components, computers, communication equipment and integrated circuits etc.

The anti-static mat is fitted with a single earthing stud, located in one corner.

• Colour blue
• Made from anti-static (conductive) and static-dissipative materials with synthetic rubber
• 2mm thick double-layer structure
• 0.5mm thick static-dissipative surface layer
• 1.5mm conductive bottom layer
• Manufacturer's part 082-0028F

This smooth-textured anti-static mats from Antistat measures 600 x 900mm and is designed to be laid out in workshops, laboratories or any other areas used for ESD components, computers, communication equipment and integrated circuits etc.

The anti-static mat is fitted with a single earthing stud, located in one corner.

• Colour blue
• Made from anti-static (conductive) and static-dissipative materials with synthetic rubber
• 2mm thick double-layer structure
• 0.5mm thick static-dissipative surface layer
• 1.5mm conductive bottom layer
• Manufacturer's part 082-0028F2

This smooth-textured anti-static mats from Antistat measures 1200 x 3300mm and is designed to be laid out in workshops, laboratories or any other areas used for ESD components, computers, communication equipment and integrated circuits etc.

The anti-static mat is fitted with a single earthing stud, located in one corner.

• Colour blue
• Made from anti-static (conductive) and static-dissipative materials with synthetic rubber
• 2mm thick double-layer structure
• 0.5mm thick static-dissipative surface layer
• 1.5mm conductive bottom layer
• Manufacturer's part 082-0028F4

This great value 2mm thick ESD bench matting is made from a surface layer of 0.5mm thick static-dissipative rubber and a bottom layer of 1.5mm conductive rubber.

It has a smooth finish and provides an excellent ESD surface for laying on workbenches or floors in workshops and laboratories where ESD sensitive components are handled, preventing damage from harmful static charges.

• Size: 600 x 1200mm
• 2mm thick double-layer matting
• Surface layer is a 0.5mm thick static-dissipative layer
• Bottom layer is a 1.5mm thick conductive layer
• Smooth finish
• Colour: grey
• Surface Resistance: 1x10⁶ < R < 1x 10⁹
• Temperature resistance: 180°C (instantaneous)
• Easy to clean
• Excellent lay-flat properties
• 10mm press stud in each corner
• Can be used as bench matting and flooring
• Ideal for use in EPAs in workshops or laboratories
• Antistat type 082-0034F

This great value 2mm thick ESD bench matting is made from a surface layer of 0.5mm thick static-dissipative rubber and a bottom layer of 1.5mm conductive rubber.

It has a smooth finish and provides an excellent ESD surface for laying on workbenches or floors in workshops and laboratories where ESD sensitive components are handled, preventing damage from harmful static charges.

• Size: 600 x 900mm
• 2mm thick double-layer matting
• Surface layer is a 0.5mm thick static-dissipative layer
• Bottom layer is a 1.5mm thick conductive layer
• Smooth finish
• Colour: grey
• Surface Resistance: 1x10⁶ < R < 1x 10⁹
• Temperature resistance: 180°C (instantaneous)
• Easy to clean
• Excellent lay-flat properties
• 10mm press stud in each corner
• Can be used as bench matting and flooring
• Ideal for use in EPAs in workshops or laboratories
• Antistat type 082-0034F3

These great value anti-static mats from Antistat are designed to be laid out in workshops, laboratories or any other areas used for ESD components, computers, communication equipment and integrated circuits etc. These smooth-textured grey mats are 1.2m wide and supplied on 10m rolls.

• Made from anti-static (conductive) and static-dissipative materials with synthetic rubber
• 2mm thick double-layer structure
• Surface layer is a 0.5mm thick static-dissipative layer
• Bottom layer is a 1.5mm conductive layer
• Manufacturer's part 082-0043

These great value anti-static mats from Antistat are designed to be laid out in workshops, laboratories or any other areas used for ESD components, computers, communication equipment and integrated circuits etc. These smooth-textured blue mats are 1.2m wide and supplied on 10m rolls.

• Made from anti-static (conductive) and static-dissipative materials with synthetic rubber
• 2mm thick double-layer structure
• Surface layer is a 0.5mm thick static-dissipative layer
• Bottom layer is a 1.5mm conductive layer
• Manufacturer's part 082-0044

This smooth-textured anti-static mats from Antistat measures 1200 x 1800mm and is designed to be laid out in workshops, laboratories or any other areas used for ESD components, computers, communication equipment and integrated circuits etc.

This anti-static mat is fitted with an ESD earthing stud.

• Colour blue
• Made from anti-static (conductive) and static-dissipative materials with synthetic rubber
• 2mm thick double-layer structure
• 0.5mm thick static-dissipative surface layer
• 1.5mm conductive bottom layer
• Manufacturer's part 082-0053

These great value anti-static mats from Antistat are designed to be laid out in workshops, laboratories or any other areas used for ESD components, computers, communication equipment and integrated circuits etc. These smooth-textured green mats are 1.2m wide and supplied on 10m rolls.

• Made from anti-static (conductive) and static-dissipative materials with synthetic rubber
• 2mm thick double-layer structure
• Surface layer is a 0.5mm thick static-dissipative layer
• Bottom layer is a 1.5mm conductive layer
• Manufacturer's part 082-0056

Beige coloured anti-static bench mat, 900 x 610mm.

• Durable two-layer synthetic rubber material
• Top layer is static dissipative
• Bottom layer is conductive
• Resistance to ground typically 10⁶ to 10⁸Ω
• 10mm stud in each corner
• Resistant to solder splash and abrasion
• Smooth surface for easy cleaning
• Thickness 2mm
• Manufacturer's part KSM32BEIGE

Note: Grounding Cables and Wrist Straps are not included with this mat.

Blue coloured anti-static bench mat, 900 x 610mm.

• Durable two-layer synthetic rubber material
• Top layer is static dissipative
• Bottom layer is conductive
• Resistance to ground typically 10⁶ to 10⁸Ω
• 10mm stud in each corner
• Resistant to solder splash and abrasion
• Smooth surface for easy cleaning
• Thickness 2mm
• Manufacturer's part KSM32BLUE

Note: Grounding Cables and Wrist Straps are not included with this mat.

Grey coloured anti-static bench mat, 900 x 610mm.

• Durable two-layer synthetic rubber material
• Top layer is static dissipative
• Bottom layer is conductive
• Resistance to ground typically 10⁶ to 10⁸Ω
• 10mm stud in each corner
• Resistant to solder splash and abrasion
• Smooth surface for easy cleaning
• Thickness 2mm
• Manufacturer's part KSM32GREY

Note: Grounding Cables and Wrist Straps are not included with this mat.

Beige coloured anti-static bench mat, 1200 x 610mm.

• Durable two-layer synthetic rubber material
• Top layer is static dissipative
• Bottom layer is conductive
• Resistance to ground typically 10⁶ to 10⁸Ω
• 10mm stud in each corner
• Resistant to solder splash and abrasion
• Smooth surface for easy cleaning
• Thickness 2mm
• Manufacturer's part KSM42BEIGE

Blue coloured anti-static bench mat, 1200 x 610mm.

• Durable two-layer synthetic rubber material
• Top layer is static dissipative
• Bottom layer is conductive
• Resistance to ground typically 10⁶ to 10⁸Ω
• 10mm stud in each corner
• Resistant to solder splash and abrasion
• Smooth surface for easy cleaning
• Thickness 2mm
• Manufacturer's part KSM42BLUE

Please note: Grounding Cables and Wrist Straps are available separately and are not included with this mat.

Grey coloured anti-static bench mat, 1200 x 610mm.

• Durable two-layer synthetic rubber material
• Top layer is static dissipative
• Bottom layer is conductive
• Resistance to ground typically 10⁶ to 10⁸Ω
• 10mm stud in each corner
• Resistant to solder splash and abrasion
• Smooth surface for easy cleaning
• Thickness 2mm
• Manufacturer's part KSM42GREY

Note: Grounding Cables and Wrist Straps are not included with this mat.