Action Can CT-90 is ideal for use when cutting, drilling and threading steel and other metals. It reduces heat and extends the life of tools by reducing friction.

• Ideal for drilling, sawing and thread cutting
• Safe for use on steel, copper, brass, stainless steel and ceramics
• Extends tool life
• Does not contain silicone or CFCs
• Reduces heat and improves surface finish
• Extreme pressure rated lubricant
• Supplied in a 500ml poly bottle with spout
• Action Can type 1483

Action Can CT-90 is ideal for use when cutting, drilling and threading steel and other metals. It reduces heat and extends the life of tools by reducing friction.

• Ideal for drilling, sawing and thread cutting
• Safe for use on steel, copper, brass, stainless steel and ceramics
• Extends tool life
• Does not contain silicone or CFCs
• Reduces heat and improves surface finish
• Extreme pressure rated lubricant
• Supplied in a 500ml poly bottle for flood application
• Action Can type 1846

This can of metal cutting lubricant from Ambersil has been manufactured with a mixture of lubricants, extreme pressure additives and anti-oxidants to allow heavier close tolerance cuts. Simply apply directly to drill bits or work pieces to improve heat dissipation and prevent chip welding. The lubricant can be used on a wide range of metals, including stainless and high carbon steels.

The spray has a number of uses and is particularly invaluable for:Mould and dye makersPattern formersHeavy engineeringPlant manufacturersMetal fabricatorsMetal parts manufacturersShipyard, docks and marine companies

• Supplied in an easy-to-use aerosol
• Excellent performance in demanding applications
• NSF H2 registration for food/beverage/pharmaceutical facilities
• Size: 400ml
• Manufacturer's part 31579-AA

This metal cutting lubricant is ideal for cutting threads using taps and dies as well as drilling, reaming and machining in steel and aluminium. It can also be used to preserve tips on TCT circular saws and router bits.

• CFC-free
• Supplied in a 400ml aerosol
• Draper type 76109

Multisol from Rocol is a general purpose water mix cutting fluid suitable for use on a wide range of machines and materials. It is designed for light/medium cutting operations on ferrous and non-ferrous metals. It contains a high percentage of refined mineral oils affording a high degree of residual corrosion protection and lubrication during machining.

• Inhibits corrosion
• Economical to use
• Low odour
• Pleasant and safe to use
• Supplied in container of 20 litres
• Manufacturer's part 35223

Multisol from Rocol is a general purpose water mix cutting fluid suitable for use on a wide range of machines and materials. It is designed for light/medium cutting operations on ferrous and non-ferrous metals. It contains a high percentage of refined mineral oils affording a high degree of residual corrosion protection and lubrication during machining.

• Inhibits corrosion
• Economical to use
• Low odour
• Pleasant and safe to use
• Supplied in container of 5 litres
• Manufacturer's part 35226

Ultracut EVO 250 from Rocol is a long life, operator-friendly, soluble oil cutting fluid.

• Formulated for light/medium cutting operations
• Exceptional cutting performance
• No biocides
• No skin sensitisers
• Metal deactivators and passivators
• High quality general purpose water mix cutting fluid
• Suitable for ferrous and non-ferrous metals
• Very economical dilutions, up to 40:1
• Supplied in drum of 5 litres
• Manufacturer's part 51366

Ultracut 370 Plus from Rocol is a long life high dilution semi-synthetic cutting and grinding fluid.

• Very high dilution – low in sump cost
• Suitable for use as a light/medium cutting and grinding fluid
• Forms a translucent green micro-emulsion when mixed with water which provides a clear view of the workpiece
• Extremely economic dilutions: up to 60:1 for cutting, and 70:1 for grinding
• Supplied in 5 litre drum
• Manufacturer's part 51376

This RTD (reaming, tapping and drilling) spray from Rocol is an aerosol applied metal cutting lubricant consisting of a concentrate of extreme pressure additives.

• Suitable for the most severe cutting operations
• Ideal for use where accessibility is a problem
• Can be applied directly to moving tools
• NATO stock number: 541-7134
• Supplied in 400ml container
• Manufacturer's part 53011

RTD Compound from Rocol is a soft paste for use in reaming, tapping and drilling and other metal cutting operations.

• Suitable for the most severe cutting operations
• Soft low melting-point paste
• Formulated to cling to the tool providing excellent cutting performance
• Application by brush – economical in use
• Rolls Royce approved – Spec CSS 137
• NATO stock number: 464-6766
• Supplied in 50g tube
• Manufacturer's part 53020

RTD Compound from Rocol is a soft paste for use in reaming, tapping and drilling and other metal cutting operations.

• Suitable for the most severe cutting operations
• Soft low melting-point paste
• Formulated to cling to the tool providing excellent cutting performance
• Application by brush – economical in use
• Rolls Royce approved – Spec CSS 137
• NATO stock number: 464-6766
• Supplied in 500g tub
• Manufacturer's part 53023

RTD Compound from Rocol is a soft paste for use in reaming, tapping and drilling and other metal cutting operations.

• Suitable for the most severe cutting operations
• Soft low melting-point paste
• Formulated to cling to the tool providing excellent cutting performance
• Application by brush – economical in use
• Rolls Royce approved – Spec CSS 137
• NATO stock number: 464-6766
• Supplied in 5kg tub
• Manufacturer's part 53026

This RTD Foamcut from Rocol is a metal cutting lubricant specially formulated to provide extreme pressure cutting performance in an economical-to-use foaming aerosol.

• Suitable for severe cutting operations
• Clean low-odour foaming spray
• Foaming action adheres to the tool
• Can be applied directly to moving tools
• Supplied in 300ml container
• Manufacturer's part 53041

RTD Cleancut from Rocol is a specially formulated, hand-applied cutting lubricant designed to improve all day-to-day machining operations – whatever the metal being worked.

• Sulphur and chlorine free
• Water washable
• Suitable for aerospace and nuclear applications
• Low viscosity, water soluble lubricant
• Non-fuming, low odour characteristics
• Non-staining on yellow metals, aluminium and brass
• Available in a plastic squeeze bottle of 350g
• Manufacturer's part 53062

RTD Cleancut from Rocol is a specially formulated, hand-applied cutting lubricant designed to improve all day-to-day machining operations – whatever the metal being worked.

• Sulphur and chlorine free
• Water washable
• Suitable for aerospace and nuclear applications
• Low viscosity, water soluble lubricant
• Non-fuming, low odour characteristics
• Non-staining on yellow metals, aluminium and brass
• Available in a5 litre container
• Manufacturer's part 53066

This RTD liquid from Rocol really is a drill's best friend. This high performance reaming, tapping and drilling fluid has been designed to double tool life and increase productivity and efficiency. It is suitable for all metals including hardened steels, titanium and nimonics. This product significantly reduces friction giving superb cutting performance. RTD Liquid can also be added to ordinary mineral cutting oil for the most severe cutting operations.

• Minimises tool/tap breakages
• Reduced friction and increased wear resistance
• Excellent surface finish
• Excellent EP performance
• Dimensional accuracy and repeatability
• Allows greater feeds and speeds
• Increases productivity and efficiency
• Multi metal compatability
• Supplied in 400g
• Manufacturer's part 53072

This RTD liquid from Rocol really is a drill's best friend. This high performance reaming, tapping and drilling fluid has been designed to double tool life and increase productivity and efficiency. It is suitable for all metals including hardened steels, titanium and nimonics. This product significantly reduces friction giving superb cutting performance. RTD Liquid can also be added to ordinary mineral cutting oil for the most severe cutting operations.

• Minimises tool/tap breakages
• Reduced friction and increased wear resistance
• Excellent surface finish
• Excellent EP performance
• Dimensional accuracy and repeatability
• Allows greater feeds and speeds
• Increases productivity and efficiency
• Multi metal compatability
• Supplied in 5 litres
• Manufacturer's part 53076

Suitable for lubricating and cooling drill bit or blade and workpiece when cutting mild steel. Improves cutting and prolongs tool life.

Suitable for lubricating and cooling drill bit or blade and workpiece when cutting mild steel. Improves cutting and prolongs tool life.

High quality tapping and cutting fluid. Suitable for a wide range of machining and drilling operations. High viscosity with excellent lubricating properties.

• High quality tapping and cutting fluid.
• Suitable for a wide range of machining and drilling operations.
• High viscosity with excellent lubricating properties.
• Model No. SCSCF400