A push-fit, two-way 8mm divider from the DM-Fit ATWD-M series.

The dividers are manufactured from safe, non-toxic materials meeting the requirements of the US FDA, WRAS, ANSI/NSF-51, 61 and SK Zert. They are widely used in water purification, food/beverage and pneumatic systems.

• Inlet and outlets take 8mm outside diameter tube
• Quick and convenient assembly
• Unique oval collet design
• Can be used with water, food, air, gases, vacuum and liquids
• Can be assembled and disassembled repeatedly
• Operating pressure (max.): 10 bar
• Material: Acetal copolymer
• Colour: black
• DM-Fit type ATWD0808-M

A push-fit, two-way 10mm divider from the DM-Fit ATWD-M series.

The dividers are manufactured from safe, non-toxic materials meeting the requirements of the US FDA, WRAS, ANSI/NSF-51, 61 and SK Zert. They are widely used in water purification, food/beverage and pneumatic systems.

• Inlet and outlets take 10mm outside diameter tube
• Quick and convenient assembly
• Unique oval collet design
• Can be used with water, food, air, gases, vacuum and liquids
• Can be assembled and disassembled repeatedly
• Operating pressure (max.): 10 bar
• Material: Acetal copolymer
• Colour: black
• DM-Fit type ATWD1010-M

A nipple adaptor with G1/8 to G3/8 parallel threads. The adaptor is manufactured from nickel plated brass and is suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

An expanding adaptor that has a G3/8 external thread expanding to a G1/2 internal thread. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

A parallel extender with G1/8 internal and external threads and 42mm length. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

A 6mm diameter hose barb to R1/8 external thread adaptor. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

A 9mm diameter hose barb to R1/4 external thread adaptor. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

A 7mm diameter hose barb to G1/8 external thread adaptor. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

A 7mm diameter hose barb to G1/4 external thread adaptor. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

A 12mm diameter hose barb to G1/4 external thread adaptor. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

A 6mm diameter hose barb to G1/8 internal thread adaptor. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

A 7mm diameter hose barb to G1/8 internal thread adaptor. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

A T connector with tapered R1/2 external threads. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

An elbow adaptor with an G3/8 external thread and an R3/8 internal thread. Manufactured from nickel plated brass and suitable for use in compressed air systems.

• Corrosion resistant
• Max. pressure 60 bar
• Max. ambient temperature 150°C

A hose adaptors with R3/8 threads and 12mm barb diameter. Manufactured from blue plastic and suitable for use in compressed air systems.

• Corrosion resistant
• Max. media temperature 100°C

This union Y is from the Pneufit C range of metric push-in fittings. it is ready to use straight from the box, offering fast assembly without the need for tools. Features releasable stainless steel grab-rings to grip PA or PUR hose types (85 or 95 durometer). The fitting is manufactured using nickel plated brass components that provide corrosion and contamination resistance over an extended life.

• Hose diameter mm
• For use with compressed air systems
• Reliable and corrosion resistant
• Operating pressure 10 bar
• Vacuum 750mm of Hg
• Ambient/media temperature -20°C to +60°C