Ambersil Industrial Degreaser FG is an innovative blend of solvents that is ideal for applications where fast cleaning is necessary and where it is safe to use low flash point solvents.

It dissolves and removes greases, oils, lubricants, adhesives and contaminants from equipment, machinery, motors and metal parts.

• NSF A8 and K1 registered (N° 140255 and 140250) for use in food industry
• Quickly cuts through dirt and grease
• Fast evaporation minimises downtime and leaves no residues
• Easy 'in-situ' cleaning with minimal odour
• Non-corrosive and non-staining
• Safe on most plastics, coatings and rubbers (test prior to use)
• Aerosol fitted with 360° spray for use at all angles, even upside down
• Ideal for electric motors, mechanical brakes and clutches, air tools, pumps, material handling equipment, dies, generators, air conditioners and compressors, wire ropes, sprockets, moulds, chains, bearings, general degreasing, oil removal, etc.
• Ambersil type 30251-AA

This solvent degreaser from Ambersil is a powerful, low odour solvent, which contains no CFCs or other chlorinated solvents and is not affected by the Montreal Protocol. It is an ideal alternative to 1,1,1-trichloroethane.

A highly effective low odour, degreasing agent widely used in aviation and aerospace servicing applications, where its excellent material compatibility, particularly on plastics is a distinct advantage over other solvent cleaners. For use in numerous industries including: aviation and aerospace, PCBs and electronics, optical devices, automotive, precision equipment, printing, agriculture, light and heavy engineering, moulding, offshore and marine. Efficiently cleans plastics, ferrous and non-ferrous metals, evaporating to leave a clean, dry surface.

• Appearance: clear, colourless liquid
• Odour: aliphatic hydrocarbon
• SG @ 25°C: 0.73
• Pressure @ 25°C: 2 Bar
• Discharge rate: 3.1 g/sec
• Kb value: 35
• Initial boiling point: 100°C
• Freezing point: -20°C
• Evaporation rate: 3.2 (with respect to Butyl Acetate)
• Flammability: classified as extremely flammable under current
• EC Regulations
• Flashpoint : not applicable in sealed aerosol
• Packaging : 400ml aerosol
• Manufacturer's part 6130002700

Specification/Approvals: meets US Federal Specification TT- N-95B Type II. Listed in British Airways Standard Practice Manual.

Janitol Original is a multi-purpose, low-odour degreasing detergent suitable for use on animal, vegetable and mineral greases and oils. It is non-caustic, non-perfumed, non-flammable and is suitable for cleaning hard surfaces without fear of tainting.

• Multi-purpose, low-odour degreasing detergent
• Suitable for use on animal, vegetable and mineral greases and oils
• Non-caustic, non-perfumed and non-flammable
• Cleans hard surfaces without fear of tainting
• Concentrated formula, for dilution as required
• Supplied in a 5 Litre bottle

Janitol Plus is a heavy-duty surface degreaser ideal for removing ground-in dirt and burnt-on food. It is a non-caustic, low-odour detergent that can be used on any surface without fear of damage or taint. Janitol Plus is supplied as a concentrate for diluting to the required strength. It mixes readily with water, has water-softening capabilities and is free-rinsing.

• Heavy-duty surface degreaser
• Ideal for removing ground-in dirt and burnt-on food
• Non-caustic, low-odour
• Can be used on any surface without fear of damage or taint
• Supplied in 5 Litre bottles

PlastiKote Trade Degreaser Spray is ideal for removing dirt, grease, oil, silicones, wax, tar, adhesives etc. This strengthens the adhesion of subsequent coating layers.

Universal maintenance fluid. Protects all metals. Displaces moisture and contains rust inhibitor. Cleans, lubricates and degreases target area. Silicon free formula suitable for bodyshop use. Ideal for using with small spray trigger bottles.

• Universal maintenance fluid.
• Displaces moisture and contains a protective rust inhibitor.
• Protects all metals.
• Contains PTFE.
• Cleans, lubricates and degreases target area
• Silicon free formula suitable for bodyshop use.
• Ideal for using with small spray trigger bottles.
• Model No. SCS0105

Swarfega Jizer is a water-rinsable parts degreaser that quickly dissolves heavy deposits of mineral oil, grease, tar, bitumen and waxes. It can be used for removing oil and grease marks from many floor surfaces, tar spots and oil from body work and cleaning paint brushes as well as being used as a general-purpose surface cleaner.

• Removes oil, grease and tar
• Suitable for general, heavy industrial and vehicle maintenance applications
• Ideal for cleaning paint brushes
• General-purpose surface cleaner
• Supplied in a 5 Litre can

The Swarfega® Jizer Degreaser is a parts degreaser which quickly dissolves heavy deposits of mineral oil, grease, tar, bitumen and waxes.

Can be used for removing oil and grease marks from many floor surfaces, tar spots and oil from bodywork and cleaning paint brushes. It is also water rinseable.

Size: 25L

Degreasing your bike chain can be a time-consuming process, time you'd rather spend out riding. Our WD-40 Specialist BIKE Degreaser formula is perfect for quickly and easily removing grease, grime, dirt, oil and other residues from chains, derailleurs, cassette sprockets and even cogsets with minimal effort, so you can get out of the garage and enjoying your ride.

To use, simply spray on the fast-acting formula, letting it work into tight spaces and difficult angles, before wiping away excess dirty fluid with a cloth. Repeat as necessary until all dirt, grease and grime has been removed.

The excess formula dries to leave no residue, and will remain on components to protect and maintain, extending the life of your bike.

• Removes grease, grime, dirt and oil from all moving parts
• Extends the life of your bike components
• Fast-acting with no residue
• Supplied as a 400ml aerosol
• Manufacturers part number 44704

WD-40® Specialist Degreaser Aerosol is a fast acting and solvent based formula that quickly removes grease, oil, dirt and grime, without leaving any residue. It works immediately on contact and is easy to rinse away. Can be used on a variety of surfaces including, metal, exhaust hoods and flooring.

Smartstraw application: Shake can thoroughly before use. Hold upright, and spray directly onto the tool and component.

Size: 500ml