The NTK 18 AL is a linear pneumatic vibrator that is especially suitable for conveying, compacting and loosening bulk material. The unit uses a freely vibrating, self reversing piston to produce a sinusoidal oscillation and the vibrator starts and stops without delay in any installed position. The frequency may be continuously adjusted by regulation of the air supply and throttling the exhaust air adjusts the amplitude. There are a variety of mounting options such as attaching the housing or the piston to a vibrating mass and additional weights are available that can be used to alter the frequency and amplitude in many different ways.

• Operating pressure 2 to 6 bar
• Nominal frequency 1600 to 2350 min^-1
• Centrifugal force range 41 to 109N
• Linear vibration
• Low noise levels
• Aluminium housing
• Drive medium compressed air or nitrogen, preferably with oil or mist

Note: A directional control valve is required for operation (not supplied).

The NTK 25 AL is a linear pneumatic vibrator that is especially suitable for conveying, compacting and loosening bulk material. The unit uses a freely vibrating, self reversing piston to produce a sinusoidal oscillation and the vibrator starts and stops without delay in any installed position. The frequency may be continuously adjusted by regulation of the air supply and throttling the exhaust air adjusts the amplitude. There are a variety of mounting options such as attaching the housing or the piston to a vibrating mass and additional weights are available that can be used to alter the frequency and amplitude in many different ways.

• Operating pressure 2 to 6 bar
• Nominal frequency 1289 to 1986 min^-1
• Centrifugal force range 107 to 269N
• Linear vibration
• Low noise levels
• Aluminium housing
• Drive medium compressed air or nitrogen, preferably with oil or mist

Note: A directional control valve is required for operation (not supplied).

The NTK 8 AL is a linear pneumatic vibrator that is especially suitable for conveying, compacting and loosening bulk material. The unit uses a freely vibrating, self reversing piston to produce a sinusoidal oscillation and the vibrator starts and stops without delay in any installed position. The frequency may be continuously adjusted by regulation of the air supply and throttling the exhaust air adjusts the amplitude. There are a variety of mounting options such as attaching the housing or the piston to a vibrating mass and additional weights are available that can be used to alter the frequency and amplitude in many different ways.

• Operating pressure 2 to 6 bar
• Nominal frequency 2440 to 3657 min^-1
• Centrifugal force range 15 to 44N
• Linear vibration
• Low noise levels
• Aluminium housing
• Drive medium compressed air or nitrogen, preferably with oil or mist

Note: A directional control valve is required for operation (not supplied).

The NTS 120H F is a linear, non-impacting pneumatic turbine vibrator with a nominal frequency of 6280 to 8960 min^-1 and a centrifugal force range of 40 to 81N. The unit uses a freely vibrating, self reversing piston to produce a sinusoidal oscillation that supports, expedites or enables a variety of applications. The vibrator starts and stops without delay in any installed position, with a built-in pressure spring providing a reliable method of start-up. An increase of the supply pressure causes a higher frequency. Suitable applications include conveying, compacting and loosening bulk material, filling, maintaining material flow, container discharging aid, etc.

• Operating pressure 2 to 6 bar
• Linear vibration
• Aluminium housing
• Resistant to aggressive environmental conditions
• Drive medium compressed air or nitrogen, preferably with oil or mist

Note: A directional control valve is required for operation (not supplied).

The NTS 250 HF is a linear, non-impacting pneumatic turbine vibrator with a nominal frequency of 3654 to 5773 min^-1 and a centrifugal force range of 111 to 346N. The unit uses a freely vibrating, self reversing piston to produce a sinusoidal oscillation that supports, expedites or enables a variety of applications. The vibrator starts and stops without delay in any installed position, with a built-in pressure spring providing a reliable method of start-up. An increase of the supply pressure causes a higher frequency. Suitable applications include conveying, compacting and loosening bulk material, filling, maintaining material flow, container discharging aid, etc.

• Operating pressure 2 to 6 bar
• Linear vibration
• Aluminium housing
• Resistant to aggressive environmental conditions
• Drive medium compressed air or nitrogen, preferably with oil or mist

Note: A directional control valve is required for operation (not supplied).