A set of quality TL35B Test leads with 2mm safety probes and crocodile clips.

The Amprobe TL35B test lead set contains two insulated lead wires with two threaded probe tips and two threaded crocodile clips. for connecting a compatible electrical test meter to a device in electrical testing applications. Compatible with multimeters, clamp meters and electrical test tools with standard input terminals. The probe tips and the included crocodile clips are threaded, allowing for a secure connection. The lead wires can be used with testing devices that have universal 4mm jacks.

• Colours: Red and Black
• Threaded Test Probes
• Threaded Crocodile Clips
• Lead Length (Approx.): 1m
• Jaw Capacity (Approx.): 16mm
• Pack Qty: 2 (1 red, 1 black)

The Cliff CL159711A is a Black 30A rated binding post from the T6 series of connectors.

One connector supplied only.

• TP6 Series
• 30A Current Rating
• Gold plated contact
• UL94HB Flammability
• 48V Voltage Rating

The Cliff CL159721A is a Red 30A rated binding post from the T6 series of connectors.

One connector supplied only.

• TP6 Series
• 30A Current Rating
• Gold plated contact
• UL94HB Flammability
• 48V Voltage Rating

The Cliff CL681560 is a Red 15A rated binding post from the SPT3 series of connectors.

One connector supplied only.

• SPT3 Series
• 15A Current Rating
• Brass with Nickel Plated Contact
• 48V Voltage Rating

The Cliff CL681561 is a Black 15A rated binding post from the SPT3 series of connectors.

One connector supplied only.

• SPT3 Series
• 15A Current Rating
• Brass with Nickel Plated Contact
• 48V Voltage Rating

The Cliff FCR19505RB is a pair of TPR/5 Series shrouded short test probes in red and black. Rated at 1KV CAT III, 10A, for use with 4mm plugs.

• TPR/5 Series
• Shrouded
• 1KV CAT III, 10A Rated
• 4mm Plug Connection
• Nylon 66 / Brass, Ni Plated

The Cliff FCR19506RB is a pair of TPR/6 Series unshrouded standard test probes in red and black rated at 1KV CAT III, 10A, for use with 4mm plugs.

• TPR/6 Series
• Unshrouded
• 1KV CAT III, 10A Rated
• 4mm Plug Connection
• Nylon 66 / Brass, Ni Plated

The Cliff FCR19507RB is a pair of TPR/7 Series shrouded standard test probes in red and black rated at 1KV CAT III, 10A, for use with 4mm plugs.

• TPR/7 Series
• Shrouded
• 1KV CAT III, 10A Rated
• 4mm Plug Connection
• Polypropylene / Brass, Ni Plated

The Cliff FCR19509RB is a pair of TPR/9 Series shrouded extended spike test probes in red and black rated at 1KV CAT III, 10A, for use with 4mm plugs.

• TPR/9 Series
• Shrouded
• 1KV CAT III, 10A Rated
• 4mm Plug Connection
• Nylon 66 / Brass, Ni Plated

SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmoulded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

• These slide-on style insulated alligator clips accept standard probe tips (red, black). SureGrip accessories are designed to improve steadiness in slippery hands. The rubber over moulded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of small, insulated, nickel plated jaws
• Blunt tip grabs round screw heads up to 9.5mm
• Recommended for use with TL222 and TL224 test leads
• CAT IV 600 V, CAT III 1000 V, 10A rating. UL listed
• One year warranty

Converts a BNC scope lead to a dual banana plug for connection to a DMM. Required when adapting a shielded BNC cable, found on high-end low current clamps such as the Fluke 80i-110s, to a DMM.

• Allows for hands-free testing in controlled voltage environments 500 VRMS maximum.
• Banana plug is nickel-plated, beryllium copper for low contact resistance
• The BNC shell is plated for tarnish resistance
• Operating temperature +50°C (+122°F) maximum

The Fluke FTP-1 is a Fused Test Probe Set with built-in replaceable fuses for additional measurement protection. If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present.

The probes have been constructed with Fluke's unique SureGrip technology, and will mount onto any standard modular test leads, for instance the Fluke TL221, TL222, or TL224.

• Connection: 4mm jack connector
• Removable tip guards for reduced probe tip exposure
• Built in fuses for additional measurement protection
• Fluke fuse part number 803293, 1000V, 11A with 20kA interrupt rating
• Probes allow indication of live voltage even with blown fuse
• 2mm threaded probe tips include removable 4mm spring contacts and removable insulated caps for probing closely spaced leads
• CAT III 1000V, CAT IV 600V, 10A rating
• Colour: 1x Black, 1x Red
• Operating temperature -20°C to 50°C
• Manufacturer's part: Fluke FTP-1

Keep your test and measurement accessories always available and untangled. This is the convenient way to store your coaxial cable assemblies, patch cords and test leads. Holders mount easily on any vertical surface. Manufactured from heavy-duty construction with mounting holes.

• Holder has 10 slots for wires up to 8 mm in diameter
• Over-all dimensions: 27.9(L) x 8.9(W) x 3.2(H) cm
• One year warranty

Attach this small, rugged light to any Fluke test probe and see exactly what you are trying to probe.

• Small, rugged light easily attaches to any Fluke test probe
• Bright white LED illuminates contact area
• Frees both hands for work
• 120 hours of battery life
• Uses 2 3V watch batteries

When you attach these probe extenders to your SureGrip test probes you will move your hands 12 inches from the contact point. A probe light is included to illuminate hard-to-see contact points.

• L210 Probe light + probe extenders
• Includes L200 probe light and TP280 test probe extenders
• Bright white LED illuminates contact area
• 8 inch probe extenders keep hands away from live circuits
• Extender fits between modular test probe and test lead
• Small, rugged light frees both hands for work
• 120 hours of battery life
• Uses 2 3V watch batteries

The L215 Kit is ideal for those in high-energy environments. Be prepared with a modular test lead set that includes 8 inch probe extenders and a light to illuminate those hard-to-reach spaces.

• L200 Probe LightTP280 20 cm t
• L200 Probe Light
• TP280 20 cm test probe extenders
• TP220 SureGrip test probes
• TL224 SureGrip silicone test lead set
• Foldable soft pouch with six pockets and hook-and-loop

The Fluke PV350 measures gauge pressure; the difference between atmospheric (barometric) pressure and the pressure (or vacuum) applied to the pressure port on the transducer. It then converts that measurement to 1mV dc per unit. The PV350 is compatible with Industrial gases and liquids that are compatible with 316 stainless steel. The DMM has to have input impedance of 10MΩ.

• Compatible with all Fluke and most popular DMMs
• Digital pressure and vacuum measurements in a single module
• Transducer sealed in 316 stainless steel compatible with variety of liquids and gases
• Measures vacuum to 76cm Hg
• Displays results in English (psig of Hg) or metric (kPa or cm Hg) units
• Measures pressure to 3447kPa (500psig)

This kit has been designed for all electrical and electronics testing in today's industrial environment.

• Ideal starter kit for industrial applications
• Handy all-in-one kit that includes: AC220 SureGrip alligator clip set
• TP220 SureGrip test probe set
• TL222 SureGrip silicone test lead set (right to right)
• One year warranty

SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmoulded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of silicone insulated leads with straight connectors on both ends.

• Reinforced strain relief
• Includes one pair (red, black) of female couplers
• Extends test leads by 1.5m
• 600V CAT IV, 1000V CAT III, 10A rating. UL listed
• One year warranty

SureGrip accessories are designed to improve steadiness in slippery hands. The rubber over moulded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. DMM test leads (red, black) with safety shrouded, standard diameter banana plugs

• Right angle connector on both ends
• Reinforced strain relief
• 1.5m silicone-insulated wire resists heat and cold
• CAT IV 600V, CAT III 1000V, 10A rating. UL listed
• One year warranty

SureGrip accessories are designed to improve steadiness in slippery hands. The rubber over moulded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. DMM test leads (1x red, 1x black) with safety shrouded, standard diameter banana plugs.

• Right angle connector on one end and straight connector on the other
• Reinforced strain relief
• 1.5m silicone-insulated wire resists heat and cold
• CAT IV 600V, CAT III 1000V, 10A rating, UL listed
• One year warranty

Electricians know that when you are measuring electrical installations there often appears to be a voltage, even if you know the wires are non energized. This is called stray or ghost voltages and is caused by the capacity between wires. Because of the very high impedance input of the meter, this stray voltage has nowhere to go which will lead to an incorrect reading on the meter. The solution is to make sure there is a lower impedance across the input terminals of the meter. However, this is not as easy as it seems since it is vital that the safety of the electrician is not compromised.

• It makes sure the meter has a low input impedance that eliminates stray voltages.
• On energized wires, the meter will indicate the real voltage.
• On non-energised circuits the meter will read close to zero (even if there are stray voltages).
• It can be used with all modern meters with standard input spacing.
• Rated CAT III 1000 V, CAT IV 600 VThe kit includes:
• SV225 Stray voltage eliminator
• TL224 SureGrip silicone test lead set (right to straight)
• TP220 SureGrip test probe set
• C75 Accessory case

An accessory kit especially designed for working in high-energy environments. The SureGrip test probe has only 4 mm of exposed metal at the tip. Test probes with less exposed metal help reduce the risk of inadvertent shorts between each other and other metal surfaces that could result in an arc flash explosion. Probe extenders fit between modular test leads and test probes, increasing the distance between you and a live circuit by 20.5cm.

• The kit includes: TP238 SureGrip insulated test probe set
• TP280 SureGrip test probe extender
• TL224 SureGrip silicone right angle/straight test lead set

This high protection fused lead set is compatible with all 4mm standard inputs (multimeters and clamp meters etc). The set uses conventional red and black colours to be compatible with all existing multimeters and similar products.

• High quality
• Leads are made of fine, multi-stranded copper wire for maximum flexibility
• Suitable for use with most multimeters
• DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
• Heavy duty EPDM insulation
• Length 1.5m
• CAT III 1000V, 10A rating. UL listed
• One year warranty

Large jaws, long leads and a piercing probe. Solid, spring-loaded copper clips with a wide 12.7mm jaw opening and serrated teeth. Large piercing needle for penetrating larger gauge wires. 1.5m, silicone-insulated leads, useable from -80°C to +150°C (-112°F to +302°F). Rated for 30 V, 10 A. One red, one black.

• Flexible silicone insulated leads are heat and cold resistant
• CAT I 30V, 10A

A set of comfort-grip probes with silicone-insulated test leads, with integral strain relief. Recommended for µV measurements.

• One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads
• Recommended for µV measurements
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed

This pair of extremely hard economical PVC insulated leads have alloy tips that will resist wear and tear. The distinctive comfort grip probes are ideal for all general measurements.

• One pair (red, black) of comfort grip probes
• 48 inches (1.22 m) PVC insulated test leads with right-angle shrouded banana plugs
• Recommended for general purpose measurements
• CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed
• One year warranty

This basic electronic test lead set has one-meter long silicone test leads, alligator clip and probe tip all neatly packed in to a soft carrying case.

• One pair (red, black) each 1 m long silicone test lead set, alligator clip and probe tip extender
• C75 soft carrying case
• CAT II 300 V. UL listed
• One year warranty

This value SureGrip set is ideal for all electrical applications.

• Very small 1 mm tips to access hard to reach test points
• Probe tip length up to 100mm, test lead length: 1m
• Included: 3 sets of spring loaded gold tips and 2 sets of stainless steel tips
• CAT IV 600V, CAT II 1000V, 3A rating
• One year warranty

Kit includes all the SureGrip leads and probes in a handy roll-up pouch:

Kit includes all the SureGrip leads and probes in a handy roll-up pouch:

• AC220 SureGrip alligator clip set
• AC280 SureGrip hook clip set
• AC283 SureGrip pincer clip set
• AC285 SureGrip large jaw alligator clip set
• TP220 SureGrip test probe set
• TL224 SureGrip silicone test lead set
• Six-pocket storage pouch

Complete set of test and measurement accessories designed especially for automotive specialists. Use the sharp stainless steel probes to contact the wire conductor or pinpoint tests on a circuit or relay, and the large jaw alligator clips to get a good ground on the engine or to connect to the battery terminals. An extra long set of alligator clips easily grip to the alternator BAT terminal or the S terminals. The set comes with silicone test leads and a case to keep everything organised.

The kit contains the following items:

• TP81 Insulation piercing clip set
• TL224 Suregrip silicone test lead set
• TP220 Suregrip test probe set
• AC220 Suregrip alligator clip set
• AC285 Suregrip large jaw alligator clip set
• Soft case

Everything you can find in the TLK281 automotive test lead kit, plus a few extras. Use the back probe pins to slide into weather pack connectors on fuel injectors, TPS and MAP sensors. A hook probe with plunger actuation allows quick connection to pins or exposed conductors.

• Tested to 60V DCThe kit contains the following items:
• TP81 Insulation piercing clip set
• TP40 Automotive back probe pins (five)
• TL224 Suregrip silicone test lead set
• TP220 Suregrip test probe set
• AC220 Suregrip alligator clip set
• AC285 Suregrip large jaw alligator clip set
• AC280 Suregrip hook clip set
• Soft case

Designed for electrical and electronics test in today's industrial environment.

• The kit includes:
• TL224 Test lead set, AC285 SureGrip alligator clips, AC220 SureGrip alligator clips, AC280 SureGrip hook clips and TP220 SureGrip industrial test probes for dependable contact with a variety of test points
• TPAK ToolPak Magnetic hanger for convenient suspension of your DMM from a metal surface
• 80BK-AK- Type thermocouple temperature probe for direct temperature measurement with your DMM?s temperature measurement functions
• C116 Protective soft case for your DMM and all its accessories

SureGrip accessories are designed to improve steadiness in slippery hands. Rubber over moulded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.

• One pair (red, black) of Industrial test probes
• Sharp, 12mm stainless steel tip provides reliable contact
• Flexible finger barrier improves grip
• Recommended for use with TL222 and TL224 test leads
• CAT IV 600V; CAT III 1000V, 10A rating. UL listed

One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals

• Hard stainless steel probe tips
• Insulated probe tip (Designed To Meet GS38 specs for United Kingdom)
• CAT IV 600V, CAT III 1000V, 10A rating. UL listed
• One year warranty

Recommended for use with TL222 and TL224. One pair (1x red, 1x black)

• IC insulated cap prevents shortening of IC legs for probing high density components or boards
• CAT III 1000V, 10A rating. UL listed
• One year warranty

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. The TP81 connects to banana jack leads (such as Fluke's TL224).

• Banana jack accepts all DMM and banana jack leads
• Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead
• For use with test leads with 4 mm banana plugs
• Tested to 60V DC

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design.

• Banana jack accepts all DMM and banana jack leads
• Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead
• For use with test leads with 2 mm probes
• Tested to 60V DC

Better than a test probe alone - these two inch long rigid back probe pins easily pass between the weather pack seal and wire. A sharp point ensures good contact to the electrical connector, and the pin's insulation protects it from shorting to other wires.

• Slides onto test probes measuring 2mm
• Tested to 60V DC

Set of push-on adaptors for TL71 and TL75 test probes

• IC test adaptors, extended probe tips, medium alligator clips (max. opening 7.6mm)
• CAT III 300V, 3A rating
• One year warranty

Professional quality black rigid probes from PJP with finger guard and rear 4mm socket.

• Probe tips include a 4mm plug section
• Rated voltage 1500V
• Maximum current rating 36A
• Dimensions 122mm long x 8mm diameter
• PJP type 404IEC

Professional quality red rigid probes from PJP with finger guard and rear 4mm socket.

• Probe tips include a 4mm plug section
• Rated voltage 1500V
• Maximum current rating 36A
• Dimensions 122mm long x 8mm diameter
• PJP type 404IEC

A pair of high quality multimeter test leads from PJP suitable for meters with shrouded type 4mm connectors.

• Ideal accessory for measuring devices and equipment
• Supplied with 2x test leads 103cm, 2x 2mm tips, 2x fixed shaft 4mm probes with protective probe covers
• Each lead supplied in red and black
• CE approved

This precision kit has been designed for the testing of surface mount and high density circuits.

• All extension barrels are insulated for added protection
• Ideal for oscilloscopes
• CE approved

Kit contents: 2 x unscrewable 4mm test probes, 2 x 2mm tips, 2 x tip protectors, 2 x safety fixed sheathed leads, 2 x safety flexible test clips.

A set of test leads from PJP designed to meet the IEC 1010-2 safety standard, suitable for use up to 1000V. The kit is completely modular in format allowing the user to assemble test lead variations as required. The test lead cable employed is a double insulated 10A silicone rubber which is extremely flexible and resistant to heat and chemical attack.

• 2x Shrouded 4mm to 4mm plug silicone rubber leads
• 2x Flexible shaft spring release probes
• 2x Fixed shaft 4mm probes with protective probe covers
• 2x 2mm tips suitable for above

Professional grade black test lead from PJP employing 1m of highly flexible 384/0.05mm silicone cable terminated at one end with a rigid shrouded probe and a fixed sheath shrouded 4mm plug at the other.

• Fitted with insulated tip to provide additional safety
• Rated 12A
• Test voltage 1000V rms
• PJP type 4311

High quality fused test probe set from PJP.

• Test probes maximum voltage 600V
• Test clips and crocodile clips maximum voltage 1000V
• Test probes have retractable shrouds
• Supplied in a tough plastic carry case
• PJP type 44200-IP2X

Kit contents: 2x test probes, 2x rigid crocodile clips, 2x flexible test clips, 2x rigid test clips.

These safety test probe clips from PJP have an insulated flexible shaft.

• Black colour
• Rated current 6A
• Connection via 4mm insulated sockets
• Rated voltage 1000V Cat3
Polypropylene and Santoprene insulation material

These safety test probe clips from PJP have an insulated flexible shaft.

• Red colour
• Rated current 6A
• Connection via 4mm insulated sockets
• Rated voltage 1000V Cat3
Polypropylene and Santoprene insulation material

The R-TECH 524601 4mm Test Probe, CAT II, 1000V, 32A, Black is a test probe with a spring loaded tip and a 4mm socket extension, which allows connection to other 4mm test equipment leads.

Designed for use with the R-TECH ranges of 4mm stackable plug leads & retractable shroud stackable plug leads. The probe will also accept other shrouded or unshrouded 4mm banana plug devices.The probe features a spring loaded probe tip, with multi-lam cage to ensure a secure fit into any 4mm socket. The probe also comes with a protective cap, which provides flexibility of use and prevents accidental probe shorting.

Ideal for connections between a circuit under test and the measuring equipment.

• Colour: Black
• Socket Connection: 4mm
• Overall Length: 104.5mm
• Probe Tip Length: 20mm
• Pack Qty: 1