Nickel-plated, with strong spring, connection by solder lug, with soft PVC insulation.

• 5A
• Black

A two lead test set from Cliff featuring unfused probes to 90° 4mm plugs, CAT III probe adaptors and crocodile clips (10A 1000V CAT II, 600V CAT III).

Kit comprises: 1x red lead assembly1x black lead assembly 1x red CAT III probe adaptor (fitted)1x black CAT III probe adaptor (fitted) 1x red extended push-fit crocodile clip1x black extended push-fit crocodile clip

• TPR1C unfused probe
• 1kV CAT II without probe adaptor cap
• 1kV CAT III with probe adaptor cap fitted
• Wire insulation material: silicone
• Length: 1.5m
• Packed in plastic wallet
• Manufacturer's part CIH29890

A two lead test set from Cliff featuring fused probes to 90° 4mm plugs and crocodile clips (10A 1000V CAT II, 600V CAT III).

Kit includes: 1x red lead assembly1x black lead assembly 1x red screw-fit crocodile clip 1x black screw-fit crocodile clip

• 1kV CAT III probe, 600V CAT III clip
• Fused: 500mA FF, 1kV HBC 50kA
• 4mm 90° plug
• Length: 1.5m
• Packed in plastic wallet
• Manufacturer's part CIH3007

A green crocodile clip from Cliff. The 4mm rear socket accepts a shrouded plug, while the front tongue catches small wires or conductor pins.

• Colour: green
• Safety rating: CAT III, (1000V CAT II)
• Fully insulated
• Jaws open to 25mm
• Nominal current: 10A
• Shaft length: 34mm
• Jack diameter: 4mm
• Nominal voltage: 1000V
• Size: 83 x 25 x 37mm (L x W x H)
• Manufacturer's part FCR7942

A blue crocodile clip from Cliff. The 4mm rear socket accepts a shrouded plug, while the front tongue catches small wires or conductor pins.

• Colour: blue
• Safety rating: CAT III, (1000V CAT II)
• Fully insulated
• Jaws open to 25mm
• Nominal current: 10A
• Shaft length: 34mm
• Jack diameter: 4mm
• Nominal voltage: 1000V
• Size: 83 x 25 x 37mm (L x W x H)
• Manufacturer's part FCR7943

A brown crocodile clip from Cliff. The 4mm rear socket accepts a shrouded plug, while the front tongue catches small wires or conductor pins.

• Colour: brown
• Safety rating: CAT III, (1000V CAT II)
• Fully insulated
• Jaws open to 25mm
• Nominal current: 10A
• Shaft length: 34mm
• Jack diameter: 4mm
• Nominal voltage: 1000V
• Size: 83 x 25 x 37mm (L x W x H)
• Manufacturer's part FCR7944

SureGrip accessories are designed to improve steadiness in slippery hands. The rubber over moulded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of large alligator clips with nickel-plated steel jaws.

• Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt
• Recommended for use with TL222 and TL224 test leads
• CAT IV 600 V; CAT III 1000 V, 10 A rating
• One year warranty

A set of insulated nickel-plated steel alligator leads.

• Includes 2 each: black, red, yellow, green & white
• Suitable for hands-free testing to 300V, 7A
• Length: 460mm (18in.)
• Wire: #22 copper
• PVC insulated
• Mueller type BU-00287

A flexible, black PVC insulator for Mueller BU-21 series crocodile clips.

• Length 127mm
• Colour: black
• Mueller type BU-23-0

A general-purpose zinc-plated steel crocodile clip with a current rating of 20A.

• Material: zinc-plated steel
• Crimp or screw connection
• Length 61.9mm (2.44in.)
• Jaw opening 15.9mm (0.63in.) max.
• Current rating 20A
• Mueller type BU-27

A general-purpose solid copper crocodile clip with a current rating of 40A.

• Material: solid copper
• Crimp or screw connection
• Length 61.9mm (2.44in.)
• Jaw opening 15.9mm (0.63in.) max.
• Current rating 40A
• Mueller type BU-27C

A general-purpose solid copper crocodile clip with curved jaws and a current rating of 40A.

• Material: solid copper
• Crimp or screw connection
• Length 61.9mm (2.44in.)
• Jaw opening 15.9mm (0.63in.) max.
• Current rating 40A
• Mueller type BU-27CGW

A flexible black PVC insulator for use with Mueller 27 series crocodile clips.

• Material: black flexible PVC
• Dielectric strength: 5kV at thinnest cross section
• Operating temperature: ‐30°C (‐20°C) to 171°C (60°F)
• Length: 89mm (3.5in.)
• Large ID: 15mm (0.6in.)
• Wire end ID: 5.6mm (0.22in.)
• Mueller type BU-29-0

A flexible red PVC insulator for use with Mueller 27 series crocodile clips.

• Material: red flexible PVC
• Dielectric strength: 5kV at thinnest cross section
• Operating temperature: -30°C (-20°C) to 171°C (60°F)
• Length: 89mm (3.5in.)
• Large ID: 15mm (0.6in.)
• Wire end ID: 5.6mm (0.22in.)
• Mueller type BU-29-0

A miniature steel alligator clip with a current rating of 5A.

• Mini steel alligator clip
• Can be attached by solder or crimp connection
• Material: nickel-plated steel
• Rating: 5A
• Length 27.8mm (1.09in.)
• Width 4mm (0.16in.)
• Height 7.94mm (0.31in.)
• Jaw opening 4.8mm (0.19in.) max.
• Mueller type BU-30

A miniature copper alligator clip with a current rating of 5A.

• Mini copper alligator clip
• Can be attached by solder or crimp connection
• Material: copper
• Rating: 5A
• Length 27.8mm (1.09in.)
• Width 4mm (0.16in.)
• Height 7.94mm (0.31in.)
• Jaw opening 4.8mm (0.19in.) max.
• Mueller type BU-30C

Gold plated steel miniature alligator clip.

• Length: 27.78mm
• Jaw opening: 4.8mm
• Crimp or solder connection
• Uses insulators BU-32

A flexible black PVC insulator for use with Mueller BU-30 series crocodile clips.

• Material: flexible PVC
• Dielectric strength: 3kV at thinnest cross section
• Operating temperature: -30°C (-20°F) to 71°C (160°F)
• Length: 30mm (1.2in.)
• Large ID: 8mm (0.3in.)
• Wire end ID: 3mm (0.1in.)
• Mueller type BU-32-0

A flexible red PVC insulator for use with Mueller BU-30 series crocodile clips.

• Material: flexible red PVC
• Dielectric strength: 3kV at thinnest cross section
• Operating temperature: -30°C (-20°F) to 71°C (160°F)
• Length: 30mm (1.2in.)
• Large ID: 8mm (0.3in.)
• Wire end ID: 3mm (0.1in.)
• Mueller type BU-32-2

Mini Alligator clip with smooth jaws, nickel plated steel.

• Solder or crimp connection
• 5 Amp Rating
• Uses insulators BU-36

Mini alligator clip with smooth jaws. Solid copper.

• Solder or crimp connection
• 5 Amp Rating
• Uses insulators BU-36

The micro alligator clip BU-34M, was designed to thrive in coastal / marine environments. The solid copper and stainless steel construction provides excellent corrosion resistance.

• Rating: 5A
• Length: 28mm
• Jaw opening: 5.6mm
• Clip: Solid copper
• Spring & Rivet: 302 Stainless Steel
• Solder connection
• Uses Insulators BU36

Stainless Steel mini-alligator clip with smooth jaws.

• 304 Stainless Steel
• Jaw opening: 5.6mm
• Length: 27.78mm
• Nose width: 1.7mm
• Rating: 5A
• Solder or Crimp connection
• Uses Insulators BU-36

A steel micro-plier type crocodile clip with black insulators and a rating of 15A.

• Insulator colour: black
• Length: 58mm (2.3in.)
• Width: 10mm (0.4in.)
• Height: 46mm (1.8in.)
• Jaw opens to: 19mm (0.75in.)
• Connection via solder or crimp
• Clip material; nickel-plated steel
• Insulator material: flexible PVC
• Rating: 15A
• Mueller type BU-40A-0

A steel micro-plier type crocodile clip with red insulators and a rating of 15A.

• Insulator colour: red
• Length: 58mm (2.3in.)
• Width: 10mm (0.4in.)
• Height: 46mm (1.8in.)
• Jaw opens to: 19mm (0.75in.)
• Connection via solder or crimp
• Clip material; nickel-plated steel
• Insulator material: flexible PVC
• Rating: 15A
• Mueller type BU-40A-2

A copper micro-plier type crocodile clip with black insulators and a rating of 20A.

• Insulator colour: black
• Length: 58mm (2.3in.)
• Width: 10mm (0.4in.)
• Height: 46mm (1.8in.)
• Jaw opens to: 19mm (0.75in.)
• Connection via solder or crimp
• Clip material; nickel-plated solid copper
• Insulator material: flexible PVC
• Rating: 20A
• Mueller type BU-40C-0

Large 200A battery clip with red insulators.

• Rating: 200A
• Connection made by crimp or solder with up to 1 AWG wire
• Length: 153mm
• Jaw opening: 38mm
• Material: Copper plated steel
• Insulators: PVC

A small copper crocodile clip, often referred to as a 'Pee-Wee' clip with a rating of 10A.

• Copper Pee-Wee clip
• Screw or crimp connection
• Jaw opens 7.9mm (0.31in.) max.
• Material: solid copper
• Length: 38.89mm (1.53in.)
• Federal spec: CID AA59466-006
• Rating: 10A
• Mueller type BU-45C

A black PVC insulator for Mueller BU-46 clips.

• Colour: black
• Material: PVC

Miniature battery clip with long black Insulators.

• Rating: 50A
• Length: 79mm
• Jaw opening: 29mm
• Copper plated steel
• PVC Insulators
• Solder or Crimp connection

Small insulated red battery clip. ************ Do not approve - wrong image

• Copper plated steel
• Rating: 50A
• Length: 79mm
• Jaw opening: 28.5mm
• Solder or Crimp connection

Miniature battery clip with black Insulators.

• Rating: 75A
• Length: 74mm
• Jaw opening: 29mm
• Solid copper
• PVC Insulators
• Solder or crimp connection

Solid copper miniature battery clip with red insulators.

• Length: 74mm
• Jaw opening: 29mm
• Rating: 75A
• Solder or crimp connection

Solid copper automotive Analyser clip,

• Rating: 20A
• Length: 50.5mm
• Jaw opening: 12.7mm
• Mesh teeth on 3 sides of jaw
• Crimp or screw connection
• Uses insulators BU-49

Mueller's BU-60 is a most common and versatile steel Alligator clip.

• Compatible with all shrouded, unshrouded and retractable 4mm (0.16in.) banana plugs
• Can also be attached by solder or crimp connection
• Length: 50.1mm (2in.)
• Jaw opens to: 7.8mm (0.31in.)
• Material: nickel-plated steel
• Rating: 10A
• Can be used with BU-62 series PVC insulators
• Mueller type BU-60

Mueller's BU-60C is a most common and versatile copper Alligator clip.

• Compatible with all shrouded, unshrouded and retractable 4mm (0.16in.) banana plugs
• Can also be attached by solder or crimp connection
• Length: 50.1mm (2in.)
• Jaw opens to: 7.8mm (0.31in.)
• Material: solid copper
• Rating: 10A
• Can be used with BU-62 series PVC insulators
• Mueller type BU-60C

Mueller's BU-60CS is a most common and versatile copper Alligator clip.

• Compatible with all shrouded, unshrouded and retractable 4mm (0.16in.) banana plugs
• Can also be attached by solder, crimp connection, or the installed #6 screw
• Material: solid copper
• Length: 50.1mm (2in.)
• Jaw opens to 7.9mm (0.31in.)
• Rating: 10A
• Can be used with BU-62 PVC insulators
• Mueller type BU-60CS

Mueller's BU-60X is a most common and versatile stainless steel Alligator clip.

• Compatible with all shrouded, unshrouded and retractable 4mm (0.16in.) banana plugs
• Can also be attached by solder or crimp connection
• Material: stainless steel (including spring and rivet)
• Rating: 10A
• Length: 50.1mm (1.97in.)
• Can be used with BU-62 series PVC insulators
• Mueller type BU-60X

A black, flexible PVC insulator for use with Mueller's BU-60 alligator clips.

• Material: flexible PVC
• Dielectric strength: 3kV at thinnest cross section
• Operating temperature: -30°C (-20°F) to 71°C (160°F)
• Length: 48mm (1.9in.)
• Large ID: 13.7mm (0.54in.)
• Wire end ID: 7.4mm (0.29in.)
• Mueller type BU-62-0

A red, flexible PVC insulator for use with Mueller's BU-60 alligator clips.

• Material: flexible PVC
• Dielectric strength: 3kV at thinnest cross section
• Operating temperature: -30°C (-20°F) to 71°C (160°F)
• Length: 48mm (1.9in.)
• Large ID: 13.7mm (0.54in.)
• Wire end ID: 7.4mm (0.29in.)
• Mueller type BU-62-2

This Mueller BU-65 series black alligator clip is fully insulated and is UL listed. Connection to the clip is by means of a 4mm banana plug. The clip is compatible with shrouded, unshrouded or retractable plug types.

• Insulation colour: black
• Length: 84mm (3.3in.)
• Width: 13mm (0.5in.)
• Height: 35mm (1.4in.)
• Jaw opens to: 19mm (0.75in.)
• Clip material: nickel-plated steel
• Housing material: nylon
• Rating: 30A
• 1000V
• IEC 61010 compliant
• UL listed
• Mueller type BU-65-0

This Mueller BU-65 series red alligator clip is fully insulated and is UL listed. Connection to the clip is by means of a 4mm banana plug. The clip is compatible with shrouded, unshrouded or retractable plug types.

• Insulation colour: red
• Length: 84mm (3.3in.)
• Width: 13mm (0.5in.)
• Height: 35mm (1.4in.)
• Jaw opens to: 19mm (0.75in.)
• Clip material: nickel-plated steel
• Housing material: nylon
• Rating: 30A
• 1000V
• IEC 61010 compliant
• UL listed
• Mueller type BU-65-2

Solid copper alligator clip with short crimp tail.

• Rating: 10A
• Length: 42.86mm
• Jaw opening: 7.9mm
• Solder or Crimp connection
• Uses insulators BU-72

A copper alligator clip with screw and a current rating of 10A.

• Alligator clip with screw
• 6-40 screw or crimp connection
• Jaw opens to 7.9mm (0.313in. max.
• Material: solid copper
• Length: 42.86mm (1.69in.)
• Federal spec: AA59466-0017
• Rating: 10A
• Mueller type BU-70CS

A Kelvin or Kelvinized clip has jaws, teeth or contacts that are electrically isolated from each other. In practice one jaw will carry the current and the other jaw will be used to sense the voltage. When used properly, Kelvin clips provide a much more accurate reading at low voltages compared to a single wire clip.

The Mueller BU-75K is the most popular miniature Kelvin clip on the market. Its gold-plated contacts offer outstanding connections with minimal resistance.

• Wires are connected to each jaw with screws
• Length: 41.3mm (1.63in.)
• Height: 31mm (1.2in.)
• Width: 8.9mm (0.35in.)
• Jaw width: 3mm (0.12in.)
• Jaw opening 8mm (0.32in.) max.
• Contact material: gold-plated brass
• Housing material: nylon
• Rating: 10A
• Mueller type BU-75K

The JP-25182 is a small Telecom clip with a 'bed of nails' for piercing the wire insulation. It is a smaller version of the JP-8783 (17-1591)and is ideal for applications that do not require the single insulation-piercing spike.

• Uses bed of nails to pierce wire insulation
• Length: 59.4mm (2.34in.)
• Jaw opens to 25.4mm (1in.)
• Clip material: nickel silver
• Hardware: brass
• Wire mounting hardware included
• Mueller type JP-25182

This professional quality 4mm safety test lead from PJP fully satisfies the safety requirements of IEC1010 Category 3 1000V.

• Colour: green
• Fixed shroud straight 4mm plugs moulded to 1m of 1.0mm² PVC double insulated cable
• Voltage rating 1000V
• Current rating 20A

A pair of tweezers from PJP with colour coded red and black probes for connection to surface mount components.

• Gold plated tips ensure good electrical connection to the component
• Connecting lead is RG174 low loss coaxial cable, 1m in length, terminated to two gold plated 4mm plugs
• Rated 400V rms. 3A max

Professional quality miniature white probe hook from PJP.

• Rated current 2A
• Maximum voltage 70V
• Diameter 11mm
• Solder termination

Professional quality miniature blue probe hook from PJP.

• Rated current 2A
• Maximum voltage 70V
• Diameter 11mm
• Solder termination