Single-sided laminated paper circuit board from Bungard, available in a range of sizes.

The Bungard name represents the excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production.

The basic material complies with all international standards and approvals, as summarised in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Length 300mm
• Width 200mm
• Thickness 1.5mm
• Copper coating thickness 35µm
• Manufacturer's part 030306E35

Single-sided laminated paper circuit board from Bungard, available in a range of sizes.

The Bungard name represents the excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production.

The basic material complies with all international standards and approvals, as summarised in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Length 200mm
• Width 150mm
• Thickness 1.5mm
• Copper coating thickness 35µm
• Manufacturer's part 030306E38

Single-sided laminated paper circuit board from Bungard, available in a range of sizes.

The Bungard name represents the excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production.

The basic material complies with all international standards and approvals, as summarised in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Length 100mm
• Width 50mm
• Thickness 1.5mm
• Copper coating thickness 35µm
• Manufacturer's part 030306E70

High quality single-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Natural backing
• Length 160mm
• Width 100mm
• Thickness 0.2mm
• Copper cladding thickness 35µm
• Maximum spectral sensitivity is in the range of 350 to 450nm
• Optical resolution of the resist better than 30μm
• Supplied in pack of 35
• Manufacturer's part 120026E33

High quality single-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Natural backing
• Maximum spectral sensitivity is in the range of 350 to 450nm
• Optical resolution of the resist better than 30μm
• Manufacturer's part 120106E33

High quality double-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Length 160mm
• Width 100mm
• Thickness 0.5mm
• Copper cladding thickness 35µm
• Manufacturer's part 120106Z33

High quality single-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Natural backing
• Maximum spectral sensitivity is in the range of 350 to 450nm
• Optical resolution of the resist better than 30μm
• Length 160mm
• Width 100mm
• Thickness 1mm
• Copper cladding thickness 35µm
• Manufacturer's part 120206E33

High quality double-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Length 160mm
• Width 100mm
• Thickness 1mm
• Copper cladding thickness 35µm
• Manufacturer's part 120206Z33

High quality single-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Natural backing
• Length 160mm
• Width 100mm
• Thickness 1.5 mm
• Copper cladding thickness 35µm
• Maximum spectral sensitivity is in the range of 350 to 450nm
• Optical resolution of the resist better than 30μm
• Manufacturer's part 120306E33

High quality single-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Natural backing
• Length 160mm
• Width 100mm
• Thickness 1.5 mm
• Copper cladding thickness 35µm
• Maximum spectral sensitivity is in the range of 350 to 450nm
• Optical resolution of the resist better than 30μm
• Supplied in pack of 10
• Manufacturer's part 120306E33-10

High quality single-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Natural backing
• Length 200mm
• Width 150mm
• Thickness 1.5 mm
• Copper cladding thickness 35µm
• Maximum spectral sensitivity is in the range of 350 to 450nm
• Optical resolution of the resist better than 30μm
• Manufacturer's part 120306E38

High quality single-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Natural backing
• Length 100mm
• Width 60mm
• Thickness 1.5 mm
• Copper cladding thickness 35µm
• Maximum spectral sensitivity is in the range of 350 to 450nm
• Optical resolution of the resist better than 30μm
• Manufacturer's part 120306E50

High quality single-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Natural backing
• Length 250mm
• Width 250mm
• Thickness 1.5 mm
• Copper cladding thickness 35µm
• Maximum spectral sensitivity is in the range of 350 to 450nm
• Optical resolution of the resist better than 30μm
• Manufacturer's part 120306E53

High quality double-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Length 160mm
• Width 100mm
• Thickness 1.5mm
• Copper cladding thickness 35µm
• Manufacturer's part 120306Z33

High quality double-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Length 160mm
• Width 100mm
• Thickness 1.5mm
• Copper cladding thickness 35µm
• Supplied in pack of 10
• Manufacturer's part 120306Z33

High quality double-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Length 200mm
• Width 150mm
• Thickness 1.5mm
• Copper cladding thickness 35µm
• Manufacturer's part 120306Z38

High quality double-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Length 250mm
• Width 250mm
• Thickness 1.5mm
• Copper cladding thickness 35µm
• Manufacturer's part 120307Z53

High quality single-sided epoxy printed circuit board from Bungard with copper cladding and a positive photo resist coating.

Bungard represents excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The base material conforms to all international standards and releases, as listed in summary in the standard IPC 4101 A.

• Lacquer coat absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged, ensuring a very long storage time
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Natural backing
• Length 160mm
• Width 100mm
• Thickness 1.5 mm
• Copper cladding thickness 70µm
• Maximum spectral sensitivity is in the range of 350 to 450nm
• Optical resolution of the resist better than 30μm
• Manufacturer's part 120307E33

Single-sided photo resist printed circuit board from Bungard made with laminated paper. The Bungard name represents the excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The basic material complies with all international standards and approvals, as summarised in the standard IPC 4101 A.

The photoresist is characterised by accurate detail rendering, high contrast steepness/parameter and short process times. However, particular attention should be drawn to its completely compliant characteristics in relation to processing tolerances. The only requirement is not to have the light exposure too short in order to have "guaranteed" results.

• Lacquer coat is absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged to ensure long storage time of over 1 year
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Size 100 x 75mm
• Thickness 1.5mm
• Copper thickness 35µm
• Manufacturer's part 130306E30

Single-sided photo resist printed circuit board from Bungard made with laminated paper. The Bungard name represents the excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The basic material complies with all international standards and approvals, as summarised in the standard IPC 4101 A.

The photoresist is characterised by accurate detail rendering, high contrast steepness/parameter and short process times. However, particular attention should be drawn to its completely compliant characteristics in relation to processing tolerances. The only requirement is not to have the light exposure too short in order to have "guaranteed" results.

• Lacquer coat is absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged to ensure long storage time of over 1 year
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Size 160 x 100mm
• Thickness 1.5mm
• Copper thickness 35µm
• Manufacturer's part 130306E33

Single-sided photo resist printed circuit board from Bungard made with laminated paper. The Bungard name represents the excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The basic material complies with all international standards and approvals, as summarised in the standard IPC 4101 A.

The photoresist is characterised by accurate detail rendering, high contrast steepness/parameter and short process times. However, particular attention should be drawn to its completely compliant characteristics in relation to processing tolerances. The only requirement is not to have the light exposure too short in order to have "guaranteed" results.

• Lacquer coat is absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged to ensure long storage time of over 1 year
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Size 300 x 200mm
• Thickness 1.5mm
• Copper thickness 35µm
• Manufacturer's part 130306E35

Single-sided photo resist printed circuit board from Bungard made with laminated paper. The Bungard name represents the excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The basic material complies with all international standards and approvals, as summarised in the standard IPC 4101 A.

The photoresist is characterised by accurate detail rendering, high contrast steepness/parameter and short process times. However, particular attention should be drawn to its completely compliant characteristics in relation to processing tolerances. The only requirement is not to have the light exposure too short in order to have "guaranteed" results.

• Lacquer coat is absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged to ensure long storage time of over 1 year
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Size 200 x 150mm
• Thickness 1.5mm
• Copper thickness 35µm
• Manufacturer's part 130306E38

Single-sided photo resist printed circuit board from Bungard made with laminated paper. The Bungard name represents the excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The basic material complies with all international standards and approvals, as summarised in the standard IPC 4101 A.

The photoresist is characterised by accurate detail rendering, high contrast steepness/parameter and short process times. However, particular attention should be drawn to its completely compliant characteristics in relation to processing tolerances. The only requirement is not to have the light exposure too short in order to have "guaranteed" results.

• Lacquer coat is absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged to ensure long storage time of over 1 year
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Size 100 x 60mm
• Thickness 1.5mm
• Copper thickness 35µm
• Manufacturer's part 130306E50

Single-sided photo resist printed circuit board from Bungard made with laminated paper. The Bungard name represents the excellent quality and reliability of the materials and equipment used in producing circuit boards for prototypes and limited series production. The basic material complies with all international standards and approvals, as summarised in the standard IPC 4101 A.

The photoresist is characterised by accurate detail rendering, high contrast steepness/parameter and short process times. However, particular attention should be drawn to its completely compliant characteristics in relation to processing tolerances. The only requirement is not to have the light exposure too short in order to have "guaranteed" results.

• Lacquer coat is absolutely dust-free with straight edges
• Photo lacquer is burnt in and artificially aged to ensure long storage time of over 1 year
• Only original Bungard circuit boards have a special, blue-dyed light-protective film
• Size 250 x 250mm
• Thickness 1.5mm
• Copper thickness 35µm
• Manufacturer's part 130306E53

Bungard Through-Contacting Rivets are used to join copper tracks on opposite sides of double-sided circuit boards.

• 0.6mm diameter
• Alternative to through-plated circuit boards
• Supplied in packs of 1000

Bungard Through-Contacting Rivets are used to join copper tracks on opposite sides of double-sided circuit boards.

• 0.8mm diameter
• Alternative to through-plated circuit boards
• Supplied in packs of 1000

Bungard Through-Contacting Rivets are used to join copper tracks on opposite sides of double-sided circuit boards.

• 1mm inner diameter
• Alternative to through-plated circuit boards
• Supplied in packs of 1000

Bungard Through-Contacting Rivets are used to join copper tracks on opposite sides of double-sided circuit boards.

• 1.2mm diameter
• Alternative to through-plated circuit boards
• Supplied in packs of 1000

Photo-positive front plate consisting of two-sided black anodised aluminium with photo-positive coating. These are exposed and processed in exactly the same way as the Bungard PCB material. During processing, however, a sponge or solid brush is used. The black sections of the image are also black on the front plate while the illuminated areas are natural aluminium colour after processing. Both sides of the plate can be used but the back is slightly coarser / rougher. The protective film is therefore marked on the front.

• 215 x 66 x 1.5mm

Photo-positive front plate consisting of two-sided black anodised aluminium with photo-positive coating. These are exposed and processed in exactly the same way as the Bungard PCB material. During processing, however, a sponge or solid brush is used. The black sections of the image are also black on the front plate while the illuminated areas are natural aluminium colour after processing. Both sides of the plate can be used but the back is slightly coarser / rougher. The protective film is therefore marked on the front.

• 213.4 x 132.5 x 1.5mm

160 x 100mm double-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 160 x 100mm double-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

Click here for processing instructions.

203 x 114mm double-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 203 x 114mm double-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

Click here for processing instructions.

220 x 100mm double-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 220 x 100mm double-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

Click here for processing instructions.

233.4 x 160mm double-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 233.4 x 160mm double-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

Click here for processing instructions.

233.4 x 220mm double-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 233.4 x 220mm double-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

Click here for processing instructions.

450 x 300mm double-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 457 x 305mm double-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

Click here for processing instructions.

160 x 100mm single-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 160 x 100mm single-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

Click here for processing instructions.

203 x 114mm single-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 203 x 114mm single-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

Click here for processing instructions.

220 x 100mm single-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 220 x 100mm single-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

Click here for processing instructions.

233.4 x 160mm single-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 233.4 x 160mm single-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

Click here for processing instructions.

233.4 x 220mm single-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 233.4 x 220mm single-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film

Click here for processing instructions.

Microtrack FR4 boards require a developer strength of 10 to 1. (Not 20 to 1 as with other products it replaces.)Exposure time is typically 2.5 to 3.5 minutes.

450 x 300mm single-sided copper-clad fibreglass PCB laminate photo-etch board coated with a high resolution photo-resist.

Microtrak laminates consist of FR4 epoxy-glass laminate sheets, dip-coated with a positive working photo-resist. The photo-resist contains a dye that provides a good contrast against the copper and allows boards to be easily inspected at the developing stage. Boards are protected by a specially designed light-proof blue film which allows them to be guillotined without the risk of fracturing the photo-resist.

• 457 x 305mm single-sided FR4 fibreglass laminate
• Thickness 1.5mm
• Copper thickness 35 micron
• High resolution positive photo-resist
• Supplied covered with blue light-proof film
• Exposure time is typically 2.5 to 3.5 minutes

Microtrack FR4 boards require a developer strength of 10 to 1 (not 20 to 1 as with other products it replaces)

This single-sided fibreglass board is high quality 305g/m copper clad board made from epoxy glass material.

• 203 x 95mm
• Single-sided
• Grade: FR4
• Fibreglass board
• Thickness: 1.6mm
• 35 micron copper thickness
• Suitable etchant: ferric chloride solution

This single-sided fibreglass board is high quality 305g/m copper clad board made from epoxy glass material.

• 305 x 203mm
• Single-sided
• Grade: FR4
• Fibreglass board
• Thickness: 1.6mm
• 35 micron copper thickness
• Suitable etchant: ferric chloride solution

This single-sided fibreglass board is high quality 305g/m copper clad board made from epoxy glass material.

• 160 x 100mm
• Single-sided
• Grade: FR4
• Fibreglass board
• Thickness: 1.6mm
• 35 micron copper thickness
• Suitable etchant: ferric chloride solution

This single-sided fibreglass board is high quality 305g/m copper clad board made from epoxy glass material.

• 233.4 x 160mm
• Single-sided
• Grade: FR4
• Fibreglass board
• Thickness: 1.6mm
• 35 micron copper thickness
• Suitable etchant: ferric chloride solution

This single-sided fibreglass board is high quality 305g/m copper clad board made from epoxy glass material.

• 220 x 100mm
• Single-sided
• Grade: FR4
• Fibreglass board
• Thickness: 1.6mm
• 35 micron copper thickness
• Suitable etchant: ferric chloride solution

This single-sided fibreglass board is high quality 305g/m copper clad board made from epoxy glass material.

• 233.4 x 220mm
• Single-sided
• Grade: FR4
• Fibreglass board
• Thickness: 1.6mm
• 35 micron copper thickness
• Suitable etchant: ferric chloride solution

This double-sided fibreglass board is high quality 305g/m copper clad board made from epoxy glass material.

• 160 x 100mm
• Double-sided
• Grade: FR4
• Fibreglass board
• Thickness: 1.6mm
• 35 micron copper thickness
• Suitable etchant: ferric chloride solution

This double-sided fibreglass board is high quality 305g/m copper clad board made from epoxy glass material.

• 233.4 x 160mm
• Double-sided
• Grade: FR4
• Fibreglass board
• Thickness: 1.6mm
• 35 micron copper thickness
• Suitable etchant: ferric chloride solution