In the mounting of panels, and particularly of printed circuit boards, it is often necessary or desirable to stack printed circuit boards or panels one above the other in spaced relation. The panels, and particularly printed circuit boards, should be insulated from one another. The structure used for effecting the stacking should be detachable to permit repair or replacement of the panels or boards, and in some instances it is necessary to pivot the panels or boards for access.

• Stand-off: 9.5mm
• Unique locking device provides a mechanically secure connection
• One piece design eliminates the need for screws, nuts and washers
• Manufactured from Nylon 6.6
• Colour: Natural
• Top hole: Snap lock 4mm ±0.08mm / Panel thickness: 0.79 - 1.57mm
• Bottom hole: Snap lock 4.75mm ±0.08mm / Panel thickness: 0.79 - 1.98mm
• Temperature range -40°C to +85°C
• RoHS compliant
• UL Flame rating V-2
• Supplied in packs of 25

These self-adhesive PCB supports allow the mounting of a PCB directly on to a chassis. They allow the panels, and particularly the printed circuit board, to be insulated from one another. The clip allows the board to be detached to permit repair or replacement.

• Stand-off height 19.1mm
• Eliminates the need for a mounting hole in the chassis
• Manufactured from Nylon 6.6
• Colour: Natural
• Top hole: Snap lock 4mm ±0.08mm / Panel thickness: 1.57mm
• Base width 17.8mm square
• Self adhesive double-sided foam tape
• Temperature range -40°C to +85°C
• RoHS compliant
• UL Flame rating V-2
• Supplied in packs of 25
• Essentra type LCBSB-12-01A-RT

These self-adhesive PCB supports allow the mounting of a PCB directly on to a chassis. They allow the panels, and particularly the printed circuit board, to be insulated from one another. The clip allows the board to be detached to permit repair or replacement.

• Stand-off height 6.4mm
• Eliminates the need for a mounting hole in the chassis
• Manufactured from Nylon 6.6
• Colour: Natural
• Top hole: Snap lock 4mm ±0.08mm / Panel thickness: 1.57mm
• Base width 17.8mm square
• Self adhesive double-sided foam tape
• Temperature range -40°C to +85°C
• RoHS compliant
• UL Flame rating V-2
• Supplied in packs of 25
• Essentra type LCBSB-4-01A-RT

These self-adhesive PCB supports allow the mounting of a PCB directly on to a chassis. They allow the panels, and particularly the printed circuit board, to be insulated from one another. The clip allows the board to be detached to permit repair or replacement.

• Stand-off height 12.7mm
• Eliminates the need for a mounting hole in the chassis
• Manufactured from Nylon 6.6
• Colour: Natural
• Top hole: Snap lock 4mm ±0.08mm / Panel thickness: 1.57mm
• Base width 17.8mm square
• Self adhesive double-sided foam tape
• Temperature range -40°C to +85°C
• RoHS compliant
• UL Flame rating V-2
• Supplied in packs of 25
• Essentra type LCBSB-8-01A-RT

These self-adhesive mini PCB supports allow the mounting of a PCB directly on to a chassis. They allow the panels, and particularly the printed circuit board, to be insulated from one another. The clip allows the board to be detached for repair or replacement.

• Stand-off height 4.8mm
• Eliminates the need for a mounting hole in the chassis
• Manufactured from Nylon 6.6
• Colour: Natural
• Top hole: Snap lock 3.18mm ±0.05mm / Panel thickness: 1.57mm
• Base width 12.7mm square
• Double-sided self-adhesive foam pad
• Temperature range -40°C to +85°C
• RoHS compliant
• UL Flame rating V-2
• Supplied in packs of 25
• Essentra type LCBSBM-3-01A-RT-RS50

These self-adhesive mini PCB supports allow the mounting of a PCB directly on to a chassis. They allow the panels, and particularly the printed circuit board, to be insulated from one another. The clip allows the board to be detached for repair or replacement.

• Stand-off height 6.4mm
• Eliminates the need for a mounting hole in the chassis
• Manufactured from Nylon 6.6
• Colour: Natural
• Top hole: Snap lock 3.18mm ±0.05mm / Panel thickness: 1.57mm
• Base width 12.7mm square
• Double-sided self-adhesive foam pad
• Temperature range -40°C to +85°C
• RoHS compliant
• UL Flame rating V-2
• Supplied in packs of 25
• Essentra type LCBSBM-4-01A-RT-RS50

These self-adhesive mini PCB supports allow the mounting of a PCB directly on to a chassis. They allow the panels, and particularly the printed circuit board, to be insulated from one another. The clip allows the board to be detached for repair or replacement.

• Stand-off height 9.5mm
• Eliminates the need for a mounting hole in the chassis
• Manufactured from Nylon 6.6
• Colour: Natural
• Top hole: Snap lock 3.18mm ±0.05mm / Panel thickness: 1.57mm
• Base width 12.7mm square
• Double-sided self-adhesive foam pad
• Temperature range -40°C to +85°C
• RoHS compliant
• UL Flame rating V-2
• Supplied in packs of 25
• Essentra type LCBSBM-6-01A-RT-RS50

These snap-in nylon blind-hole supports are pushed through the hole in the panel or chassis, which then closes and snaps open on the opposite side to give a mechanical and secure lock. To remove, simply squeeze the locking device of the spacer/support.

This PCB support will allow the mounting of a PCB directly on to the chassis. It will allow the panels, and particularly the printed circuit board to be insulated from one another. The structure used for effecting the stacking allows the board to be detached to permit repair or replacement of the panels or boards.

• Stand-off height: 12.7mm
• Easily dismantled for change or repair
• Provides an extremely strong hold to the chassis
• Snap lock 4mm ±0.08mm / panel thickness: 1.57mm
• Fixing hole requires a No. 6 / M3.5mm self-tapping screw
• Manufactured from Nylon 6.6
• Colour: Natural
• Temperature range -40°C to +85°C
• RoHS compliant
• UL Flame rating V-2
• Supplied in packs of 25

This PCB Spacer from PB Fastener & Components has been designed for a 4mm PCB hole and is equipped with a 5mm spacer body. Manufactured using a durable, lightweight plastic which provides a strong dependable grip, secured by means of a self-tapping screw

• White colour
• 1.6mm PCB thickness
• M3 thread
• Ideal for PCB's
• Plastic material
• Manufacturer's part 449.06.05

This PCB Spacer from PB Fastener & Components has been designed for a 4mm PCB hole and is equipped with a 10mm spacer body. Manufactured using a durable, lightweight plastic which provides a strong dependable grip, secured by means of a self-tapping screw

• White colour
• 1.6mm PCB thickness
• M3 thread
• Ideal for PCB's
• Plastic material
• Manufacturer's part 449.06.10

This Black PCB Spacer 5mm from PB Fastener & Components is a dome-shaped spacer designed for a 3.2mm PCB hole with 5mm chassis. No tools, nuts or bolts are needed to use this plastic spacer, which provides a strong dependable grip.

• Black colour
• Ideal for PCB's
• Durable and lightweight
• Material thicknesses: circuit board 1.6mm, chassis 3.0mm
• Manufacturer's part 571.06.05

This Self-Adhesive PCB Spacer from PB Fastener & Components is a dome-shaped spacer designed for a 4mm PCB hole and equipped with a 6.4mm spacer body with self-adhesive square panel. Manufactured using a durable, lightweight plastic which provides a strong dependable grip and remains compatible with a 1.6mm thick printed circuit board.

This Self-Adhesive PCB Spacer from PB Fastener & Components is a dome-shaped spacer designed for a 4mm PCB hole and equipped with a 9.5mm spacer body with self-adhesive square panel. Manufactured using a durable, lightweight plastic which provides a strong dependable grip and remains compatible with a 1.6mm thick printed circuit board.

Standard PCB pillars in natural coloured nylon 66, ideal for mounting PCBs on to a chassis.

• Effective height: 4.9mm
• Overall length: 13.3mm
• Chassis fixing: No. 6 self-tapping screw
• Fixing hole for PCB: 4mm
• Fixing hole for chassis: 3mm
• PCB thickness: 2mm
• Material: UL approved Nylon 66, 94-V2
• Halogen-free
• Supplied in packs of 25

Standard PCB pillars in natural coloured nylon 66, ideal for mounting PCBs on to a chassis.

• Effective height: 9.6mm
• Overall length: 17.4mm
• Chassis fixing: No. 6 self-tapping screw
• Fixing hole for PCB: 4mm
• Fixing hole for chassis: 3mm
• PCB thickness: 2mm
• Material: UL approved Nylon 66, 94-V2
• Halogen-free
• Supplied in packs of 25

Standard PCB pillars in natural coloured nylon 66, ideal for mounting PCBs on to a chassis.

• Effective height: 12.7mm
• Overall length: 20.6mm
• Chassis fixing: No. 6 self-tapping screw
• Fixing hole for PCB: 4mm
• Fixing hole for chassis: 3mm
• PCB thickness: 2mm
• Material: UL approved Nylon 66, 94-V2
• Halogen-free
• Supplied in packs of 25

Flexible nylon mounting brackets that allow PCBs to be hinged for easy fault-finding or repair work.

• Overall length: 25mm
• Width: 7mm
• Distance between pillars: 17.2mm
• PCB hole diameter: 4mm
• PCB thickness: 1.6mm
• Material: UL approved Nylon 66, 94-V2
• Halogen-free
• Colour: natural
• Supplied in packs of 100

Miniature support posts for mounting PCBs, etc., to a chassis or another PCB.

One end of the post is designed to lock in place for a permanent fixing to a chassis and the other to push-fit into the PCB, but still allow removal for maintenance without the use of a tool.

• Effective height: 3.2mm
• Chassis fixing hole diameter: 4mm
• Chassis thickness: 1.6mm
• PCB fixing hole diameter: 4mm
• PCB thickness: 1.6mm
• Overall length: 10.8mm
• Material: UL approved Nylon 66, 94-V2
• Halogen-free
• Colour: natural
• Supplied in packs of 100

Miniature support posts for mounting PCBs, etc., to a chassis or another PCB.

One end of the post is designed to lock in place for a permanent fixing to a chassis and the other to push-fit into the PCB, but still allow removal for maintenance without the use of a tool.

• Effective height: 6.3mm
• Chassis fixing hole diameter: 4mm
• Chassis thickness: 1.6mm
• PCB fixing hole diameter: 4mm
• PCB thickness: 1.6mm
• Overall length: 13.9mm
• Material: UL approved Nylon 66, 94-V2
• Halogen-free
• Colour: natural
• Supplied in packs of 100

Miniature support posts for mounting PCBs, etc., to a chassis or another PCB.

One end of the post is designed to lock in place for a permanent fixing to a chassis and the other to push-fit into the PCB, but still allow removal for maintenance without the use of a tool.

• Effective height: 10.5mm
• Chassis fixing hole diameter: 4mm
• Chassis thickness: 1.6mm
• PCB fixing hole diameter: 4mm
• PCB thickness: 1.6mm
• Overall length: 18.1mm
• Material: UL approved Nylon 66, 94-V2
• Halogen-free
• Colour: natural
• Supplied in packs of 100

Miniature support posts for mounting PCBs, etc., to a chassis or another PCB.

One end of the post is designed to lock in place for a permanent fixing to a chassis and the other to push-fit into the PCB, but still allow removal for maintenance without the use of a tool.

• Effective height: 15.9mm
• Chassis fixing hole diameter: 4mm
• Chassis thickness: 1.6mm
• PCB fixing hole diameter: 4mm
• PCB thickness: 1.6mm
• Overall length: 27.1mm
• Material: UL approved Nylon 66, 94-V2
• Halogen-free
• Colour: natural
• Supplied in packs of 100

Miniature support posts for mounting PCBs, etc., to a chassis or another PCB.

One end of the post is designed to lock in place for a permanent fixing to a chassis and the other to push-fit into the PCB, but still allow removal for maintenance without the use of a tool.

• Effective height: 22.2mm
• Chassis fixing hole diameter: 4mm
• Chassis thickness: 1.6mm
• PCB fixing hole diameter: 4mm
• PCB thickness: 1.6mm
• Overall length: 33.4mm
• Material: UL approved Nylon 66, 94-V2
• Halogen-free
• Colour: natural
• Supplied in packs of 100

A Nylon 66 snap-fit PCB support pillar that provides an easy and speedy method of mounting a PCB on a chassis or panel.

• Effective spacing height: 6.3mm
• Support snap-fits into 4.8mm hole in chassis
• PCB snaps into position via 4mm holes drilled into the board
• Overall length: 14.4mm
• Material: UL approved Nylon 66, 94-V2
• Colour: natural
• Supplied in packs of 50

A Nylon 66 snap-fit PCB support pillar that provides an easy and speedy method of mounting a PCB on a chassis or panel.

• Effective spacing height: 12.5mm
• Support snap-fits into 4.8mm hole in chassis
• PCB snaps into position via 4mm holes drilled into the board
• Overall length: 20.6mm
• Material: UL approved Nylon 66, 94-V2
• Colour: natural
• Supplied in packs of 50

These 5.5mm high PCB pillars have a self-adhesive backed base which provides a fast, effective, positive support for PCBs where chassis holes are not possible, for example inside front or rear panels, or on extra thick panels.

• Effective height: 5.5mm
• Self-adhesive base
• PCB snaps into position via 4mm holes drilled into the board
• Suitable for 1.6 to 2mm thick PCBs
• Base dimensions: 18 x 18mm
• Material: Nylon 6.6
• Colour: natural
• UL94-V2 rated
• Supplied in packs of 50

These 9.6mm high PCB pillars have a self-adhesive backed base which provides a fast, effective, positive support for PCBs where chassis holes are not possible, for example inside front or rear panels, or on extra thick panels.

• Effective height: 9.6mm
• Self-adhesive base
• PCB snaps into position via 4mm holes drilled into the board
• Suitable for 1.6 to 2mm thick PCBs
• Base dimensions: 18 x 18mm
• Material: Nylon 6.6
• Colour: natural
• UL94-V2 rated
• Supplied in packs of 50

These 12.8mm high PCB pillars have a self-adhesive backed base which provides a fast, effective, positive support for PCBs where chassis holes are not possible, for example inside front or rear panels, or on extra thick panels.

• Effective height: 12.8mm
• Self-adhesive base
• PCB snaps into position via 4mm holes drilled into the board
• Suitable for 1.6 to 2mm thick PCBs
• Base dimensions: 18 x 18mm
• Material: Nylon 6.6
• Colour: natural
• UL94-V2 rated
• Supplied in packs of 50