Draper 38371 Multi Directional Hose Clamp Pliers
|
|
![](images/trans_pixel.gif) |
Spring loaded pliers for gripping hose clamps. Perfect when removing or replacing radiator pipes on cars and commercial vehicles. The notched jaws clasp on two sides. Designed for standard hose clamps and VAG Group fuel line/ventilation pipe clamps. Manufactured from hardened steel with soft grip handles. Display packed. |
|
Price |
|
Rapid Electronics Code |
£35.89 |
|
91-9499 |
|
|
More info / buy
|
|
|
Draper 55591 8mm Wide Hose Clamp Set
|
|
![](images/trans_pixel.gif) |
This set contains 8 tensioning clamps and 3m of banding, allowing you to make hose clamps to your exact required size. - Banding width: 8mm
- 3m length of banding
- 8 tensioning clamps
- Draper type 55591
|
|
Price |
|
Rapid Electronics Code |
£9.73 |
|
91-1214 |
|
|
More info / buy
|
|
|
Draper 55592 12mm Wide Hose Clamp Set
|
|
![](images/trans_pixel.gif) |
This set contains 8 tensioning clamps and 3m of banding, allowing you to make hose clamps to your exact required size. - Banding width: 12mm
- 3m length of banding
- 8 tensioning clamps
- Draper type 55592
|
|
Price |
|
Rapid Electronics Code |
£15.62 |
|
91-1215 |
|
|
More info / buy
|
|
|
Draper 84149 Hose Clip Driver (7mm)
|
|
![](images/trans_pixel.gif) |
Flexi-shaft hose clip drivers fitted with a 8mm diameter spring steel flexible shaft. Attached with 1/4" square drive male end and a bi-material soft grip handle providing user comfort even when used for prolonged periods. Supplied with a 7mm socket. |
|
Price |
|
Rapid Electronics Code |
£8.15 |
|
91-9503 |
|
|
More info / buy
|
|
|
Draper 84155 Hose Clip Driver (7mm)
|
|
![](images/trans_pixel.gif) |
Flexi-shaft hose clip drivers fitted with a 8mm diameter spring steel flexible shaft. Attached with 1/4" square drive male end and a bi-material soft grip handle providing user comfort even when used for prolonged periods. Supplied with a 7mm socket. |
|
Price |
|
Rapid Electronics Code |
£13.66 |
|
91-9504 |
|
|
More info / buy
|
|
|
Draper Expert 38386 40mm Capacity Hose Clamp Pliers
|
|
![](images/trans_pixel.gif) |
Expert Quality, single-handed hose clamp pliers with locking mechanism. Manufactured from reinforced nylon with parallel closing smooth rounded 90� jaws designed to avoid clamp creep. Compared to conventional straight pliers the 90� jaws provide less deformation to clamped pipe preventing accidental damage. Display packed. |
|
Price |
|
Rapid Electronics Code |
£14.40 |
|
91-9502 |
|
|
More info / buy
|
|
|
Draper Expert 75305 Hose Clip Driver (6mm and 7mm)
|
|
![](images/trans_pixel.gif) |
Expert Quality, for use on hose clips. Spring steel flexible shaft with 6mm and 7mm (reversible socket) hexagon adaptor to undo radiator hose clips. Polymer vulcanized 'soft grip' rubber handles, providing excellent grip which helps deliver higher torque. Display packed. |
|
Price |
|
Rapid Electronics Code |
£15.79 |
|
91-9505 |
|
|
More info / buy
|
|
|
Draper Expert 89791 180mm Clic and Clic-r Hose Clamp Tool
|
|
![](images/trans_pixel.gif) |
A plier-type tool designed for releasing and refitting reusable Clic and Clic-R type metal hose clips as fitted to many engines. - Spring-loaded forged handles
- PVC dipped grips
- Length: 180mm
- Draper type 89791
|
|
Price |
|
Rapid Electronics Code |
£16.58 |
|
91-1216 |
|
|
More info / buy
|
|
|
Draper Expert 89793 230mm Flexible Ratchet Hose Clamp Pliers
|
|
![](images/trans_pixel.gif) |
Pliers for the removal and replacement of metal or plastic spring-loaded self-tightening hose clamps. Flexible long reach mechanism allows the pliers to release and lock hose clamps in the opened position. - Ideal for working in confined engine bays
- Fitted with 700mm long cable
- For clamp diameters from 18mm to 54mm (approx.)
- Plier length: 230mm
- Draper type 89793
|
|
Price |
|
Rapid Electronics Code |
£36.32 |
|
91-1217 |
|
|
More info / buy
|
|
|
Faithfull 1 Hose Clip - Zinc MSZP 25 - 35mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 1.Adjustment: 25 - 35mm. |
|
Price |
|
Rapid Electronics Code |
£1.22 |
|
95-9746 |
|
|
More info / buy
|
|
|
Faithfull 1 Stainless Steel Hose Clip 25 - 35mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 1.Adjustment: 25 - 35mm. |
|
Price |
|
Rapid Electronics Code |
£2.23 |
|
95-9286 |
|
|
More info / buy
|
|
|
Faithfull 12.5 Hose Clip - Zinc MSZP 286 - 318mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. The Faithfull FAIHC125B MSZP hose clip comes in the following:Size: 12.5.Adjustment: 286 - 318mm. |
|
Price |
|
Rapid Electronics Code |
£2.72 |
|
95-9744 |
|
|
More info / buy
|
|
|
Faithfull 1A Hose Clip - Zinc MSZP 22 - 30mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 1A. Adjustment: 22 - 30mm. |
|
Price |
|
Rapid Electronics Code |
£1.02 |
|
95-9745 |
|
|
More info / buy
|
|
|
Faithfull 1A Stainless Steel Hose Clip 22 - 30mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 1A.Adjustment: 22 - 30mm. |
|
Price |
|
Rapid Electronics Code |
£2.23 |
|
95-9284 |
|
|
More info / buy
|
|
|
Faithfull 1M Hose Clip - Zinc MSZP 32 - 45mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 1M.Adjustment: 32 - 45mm. |
|
Price |
|
Rapid Electronics Code |
£1.13 |
|
95-9747 |
|
|
More info / buy
|
|
|
Faithfull 1M Stainless Steel Hose Clip 32 - 45mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. The Faithfull FAIHC1MSSB Stainless Steel Hose Clip comes in the following:Size: 1M.Adjustment: 32 - 45mm. |
|
Price |
|
Rapid Electronics Code |
£2.50 |
|
95-9285 |
|
|
More info / buy
|
|
|
Faithfull 1X Hose Clip - Zinc MSZP 30 - 40mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 1X.Adjustment: 30 - 40mm. |
|
Price |
|
Rapid Electronics Code |
£1.11 |
|
95-9748 |
|
|
More info / buy
|
|
|
Faithfull 1X Stainless Steel Hose Clip 30 - 40mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 1X.Adjustment: 30 - 40mm. |
|
Price |
|
Rapid Electronics Code |
£2.23 |
|
95-9287 |
|
|
More info / buy
|
|
|
Faithfull 2 Hose Clip - Zinc MSZP 40 - 55mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 2. Adjustment: 40 - 55mm. |
|
Price |
|
Rapid Electronics Code |
£1.20 |
|
95-9750 |
|
|
More info / buy
|
|
|
Faithfull 2A Hose Clip - Zinc MSZP 35 - 50mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 2A. Adjustment: 35 - 50mm. |
|
Price |
|
Rapid Electronics Code |
£0.27 |
|
95-9749 |
|
|
More info / buy
|
|
|
Faithfull 2A Stainless Steel Hose Clip 35 - 50mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. The Faithfull FAIHC2ASSB Stainless Steel Hose Clip comes in the following:Size: 2A.Adjustment: 35 - 50mm. |
|
Price |
|
Rapid Electronics Code |
£2.50 |
|
95-9288 |
|
|
More info / buy
|
|
|
Faithfull 2A W/S 50 Wing Screw Hose Clip 32 - 50mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. This user friendly product features a comfortable, plastic, easy-grip wing screw that allows tool-free tightening or loosening of the clips. The wing screw hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. Size: 2A.Adjustment: 32 - 50mm. |
|
Price |
|
Rapid Electronics Code |
£1.55 |
|
95-9668 |
|
|
More info / buy
|
|
|
Faithfull 2X Hose Clip - Zinc MSZP 45 - 60mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 2X.Adjustment: 45 - 60mm. |
|
Price |
|
Rapid Electronics Code |
£0.70 |
|
95-9751 |
|
|
More info / buy
|
|
|
Faithfull 2X Stainless Steel Hose Clip 45 - 60mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. The Faithfull FAIHC2XSSB Stainless Steel Hose Clip comes in the following:Size: 2X.Adjustment: 45 - 60mm. |
|
Price |
|
Rapid Electronics Code |
£2.50 |
|
95-9290 |
|
|
More info / buy
|
|
|
Faithfull 3 Hose Clip - Zinc MSZP 55 - 70mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 3.Adjustment: 55 - 70mm. |
|
Price |
|
Rapid Electronics Code |
£0.31 |
|
95-9752 |
|
|
More info / buy
|
|
|
Faithfull 3X Hose Clip - Zinc MSZP 60 - 80mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 3X.Adjustment: 60 - 80mm. |
|
Price |
|
Rapid Electronics Code |
£0.30 |
|
95-9753 |
|
|
More info / buy
|
|
|
Faithfull 4 Hose Clip - Zinc MSZP 70 - 90mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 4.Adjustment: 70 - 90mm |
|
Price |
|
Rapid Electronics Code |
£1.12 |
|
95-9754 |
|
|
More info / buy
|
|
|
Faithfull 4X Hose Clip - Zinc MSZP 85 - 100mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 4X.Adjustment: 85 - 100mm. |
|
Price |
|
Rapid Electronics Code |
£0.91 |
|
95-9755 |
|
|
More info / buy
|
|
|
Faithfull 5 Hose Clip - Zinc MSZP 90 - 120mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 5.Adjustment: 90 - 120mm. |
|
Price |
|
Rapid Electronics Code |
£1.05 |
|
95-9756 |
|
|
More info / buy
|
|
|
Faithfull 6 Hose Clip - Zinc MSZP 110 - 140mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 6.Adjustment: 110 - 140mm. |
|
Price |
|
Rapid Electronics Code |
£2.34 |
|
95-9757 |
|
|
More info / buy
|
|
|
Faithfull 6X Hose Clip - Zinc MSZP 120 - 150mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 6X.Adjustment: 120 - 150mm. |
|
Price |
|
Rapid Electronics Code |
£1.93 |
|
95-9758 |
|
|
More info / buy
|
|
|
Faithfull 7 Hose Clip - Zinc MSZP 135 - 165mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 7.Adjustment: 135 - 165mm. |
|
Price |
|
Rapid Electronics Code |
£1.93 |
|
95-9760 |
|
|
More info / buy
|
|
|
Faithfull 7.5 Hose Clip - Zinc MSZP 158 - 190mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 7.5.Adjustment: 158 - 190mm. |
|
Price |
|
Rapid Electronics Code |
£2.23 |
|
95-9759 |
|
|
More info / buy
|
|
|
Faithfull 8.5 Hose Clip - Zinc MSZP 184 - 216mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: 8.5.Adjustment: 184 - 216mm. |
|
Price |
|
Rapid Electronics Code |
£2.23 |
|
95-9761 |
|
|
More info / buy
|
|
|
Faithfull FAIHCDISP Hoseclip Display C/W Stock 100Pc
|
|
![](images/trans_pixel.gif) |
The Faithfull Hoseclip display is a colourful wire framed dispenser with a backing board carrying size information on the clip selection available. Supplied complete with 10 of each of the following popular sizes of hose clips. FAIHCOOOB 000 MSZP Hose Clip 9.5 - 12mmFAIHCMOOB M00 MSZP Hose Clip 11 - 16mmFAIHCOOB 00 MSZP Hose Clip 13 - 20mmFAIHCOB 0 MSZP Hose Clip 16 - 22mmFAIHCOXB 0X MSZP Hose Clip 18 - 25mmFAIHC1AB 1A MSZP Hose Clip 22 - 30mmFAIHC1B 1 MSZP Hose Clip 25 - 35mmFAIHC1XB 1X MSZP Hose Clip 30 - 40mmFAIHC1MB 1M MSZP Hose Clip 32 - 45mmFAIHC2AB 2A MSZP Hose Clip 35 - 50mmFaithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes |
|
Price |
|
Rapid Electronics Code |
£49.26 |
|
95-7846 |
|
|
More info / buy
|
|
|
Faithfull FAISDFLEX Flex Drive Screwdriver 6.5mm (1/4in) Magnetic
|
|
![](images/trans_pixel.gif) |
The Faithfull Flexi Screwdriver has a magnetic 6.5mm (1/4in) bit driver and can be used with all standard screwdriver bits. With a flexible shaft for access into tight places. The full size, bi-material, soft grip handles are designed to maximise user comfort and offer a firm non-slip grip. |
|
Price |
|
Rapid Electronics Code |
£6.68 |
|
95-7379 |
|
|
More info / buy
|
|
|
Faithfull FAISDHOSE Flexi Drive Hose Clip Driver 7mm Hex
|
|
![](images/trans_pixel.gif) |
The Faithfull Flexi Drive Hose Clip Driver has a 7mm hex socket specifically designed for hose clip bolts. With a flexible shaft for access into tight places. The full size, bi-material, soft grip handles are designed to maximise user comfort and offer a firm non-slip grip. |
|
Price |
|
Rapid Electronics Code |
£6.68 |
|
95-7397 |
|
|
More info / buy
|
|
|
Faithfull MOO Hose Clip - Zinc MSZP 11 - 16mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: MOO.Adjustment: 11 - 16mm. |
|
Price |
|
Rapid Electronics Code |
£0.43 |
|
95-9765 |
|
|
More info / buy
|
|
|
Faithfull MOO Stainless Steel Hose Clip 11 - 16mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: MOO.Adjustment: 11 - 16mm. |
|
Price |
|
Rapid Electronics Code |
£1.74 |
|
95-9292 |
|
|
More info / buy
|
|
|
Faithfull O Hose Clip - Zinc MSZP 16 - 22mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: O.Adjustment: 16 - 22mm. |
|
Price |
|
Rapid Electronics Code |
£0.93 |
|
95-9763 |
|
|
More info / buy
|
|
|
Faithfull O Stainless Steel Hose Clip 16 - 22mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: O.Adjustment: 16 - 22mm. |
|
Price |
|
Rapid Electronics Code |
£2.23 |
|
95-9295 |
|
|
More info / buy
|
|
|
Faithfull OO Stainless Steel Hose Clip 13 - 20mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: OO.Adjustment: 13 - 20mm. |
|
Price |
|
Rapid Electronics Code |
£1.14 |
|
95-9294 |
|
|
More info / buy
|
|
|
Faithfull OOO Hose Clip - Zinc MSZP 9.5 - 12mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. OOO Hose Clips - Zinc MSZP 9.5 - 12mmAdjustment . 9.5 - 12mm. |
|
Price |
|
Rapid Electronics Code |
£0.55 |
|
95-9767 |
|
|
More info / buy
|
|
|
Faithfull OOO Stainless Steel Hose Clip 9.5 - 12mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: OOO.Adjustment: 9.5 - 12mm. |
|
Price |
|
Rapid Electronics Code |
£1.74 |
|
95-9293 |
|
|
More info / buy
|
|
|
Faithfull OX Hose Clip - Zinc MSZP 18 - 25mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: OX. Adjustment: 18 - 25mm. |
|
Price |
|
Rapid Electronics Code |
£0.96 |
|
95-9764 |
|
|
More info / buy
|
|
|
Faithfull OX Stainless Steel Hose Clip 18 - 25mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm. Size: OX.Adjustment: 18 - 25mm. |
|
Price |
|
Rapid Electronics Code |
£2.23 |
|
95-9296 |
|
|
More info / buy
|
|
|
Faithfull OX W/S 25 Wing Screw Hose Clip 16 - 25mm
|
|
![](images/trans_pixel.gif) |
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. This user friendly product features a comfortable, plastic, easy-grip wing screw that allows tool-free tightening or loosening of the clips. The wing screw hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. Size: OX.Adjustment: 16 - 25mm. |
|
Price |
|
Rapid Electronics Code |
£1.18 |
|
95-9670 |
|
|
More info / buy
|
|
|
Jubilee CDR95 Clip Driver - Hexagonal 95mm (3.3/4in)
|
|
![](images/trans_pixel.gif) |
A Straight Driver with 7mm hexagonal recess for correctly tightening Jubilee® Hose Clips. Fitted with a T type handle. Size: 95mm (3.3/4in) |
|
Price |
|
Rapid Electronics Code |
£18.00 |
|
96-3776 |
|
|
More info / buy
|
|
|
Jubilee WS020 Wingspade Hose Clip 13 - 20mm (1/2 - 3/4in)
|
|
![](images/trans_pixel.gif) |
Jubilee Wingspade® clips are made from zinc protected mild steel and used for fixing flexible rubber hoses etc. They feature a plastic Jubilee Wingspade® fitting instead of the normal 7mm hexagon so that tightening and untightening can be done by hand. Size OOAdjustment 13 - 20mmAdjustment 1/2 - 3/4in |
|
Price |
|
Rapid Electronics Code |
£1.74 |
|
96-3783 |
|
|
More info / buy
|
|
|
Jubilee WS027 Wingspade Hose Clip 16 - 27mm (5/8 - 1in)
|
|
![](images/trans_pixel.gif) |
Jubilee Wingspade® clips are made from zinc protected mild steel and used for fixing flexible rubber hoses etc. They feature a plastic Jubilee Wingspade® fitting instead of the normal 7mm hexagon so that tightening and untightening can be done by hand. Size OXAdjustment 16 - 25mmAdjustment 5/8 - 1in |
|
Price |
|
Rapid Electronics Code |
£1.51 |
|
96-3784 |
|
|
More info / buy
|
|
|