5 x 20 Fuse holder for PCB mounting.

• PC Horizontal and Vertical Mount
• Touchproof Category PC2
• Fuse Sizes 5x 20mm
• Bayonet Cap/Screwdriver Release
• 10A, 250V
• VDE, UR, CSA and IMQ approvals

Buy Fuse Holder (Straight Pin) CFH02 20mm from CamdenBoss - a 5 x 20mm fuse with straight pins. A transparent snap-on plastic hood provides a fingerproof enclosure.

• 6.3A current rating
• 250V voltage rating
• PCB mount
• Tinned nickel plated brass contact
• Plastic body
• -20°C to +125°C operating temperature
• 22.6mm long, 9mm wide, 18mm high
• 3kV dielectric strength
• 1.6W power dissipation
• 100MR insulation resistance
• Approved to CE, SEMKO and VDE

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

Fuseholder for 5x20mm fuse with kinked pins for easy PCB retention. A transparent snap-on plastic hood provides a fingerproof enclosure.

• 6.3A current rating
• 250V voltage rating
• PCB mount
• Tinned nickel plated brass contact
• Plastic body
• -20°C to +125°C operating temperature
• 22.6mm long, 9mm wide, 18mm high
• 3kV dielectric strength
• 1.6W power dissipation
• 100MR insulation resistance
• Approved to CE, SEMKO and VDE

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

Hood for 5x20mm chassis holder.

• Plastic body
• -20°C to +125°C operating temperature
• 26.6mm long, 9mm wide, 14.5mm high
• Approved to CE, SEMKO and VDE

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

Vertical mounting black polycarbonate fuseholder from CamdenBoss for 5 x 20mm fuses for direct vertical mounting to PCBs. The fixing cap may be removed by screwdriver or finger release.

• Maximum fuse rating 6.3A
• 250V voltage rating
• Solder pin terminal
• Tinned nickel plated brass contact
• 38.1mm high, 10mm diameter

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

Horizontal mounting fuseholder with black polycarbonate body for 5 x 20mm type fuses for direct horizontal mounting to PCBs.

• Fixing cap may be removed by screwdriver or finger release
• Maximum fuse rating 6.
• 250V voltage rating
• PCB mount
• Tinned nickel plated brass contact
• Screw cap
• 33.1mm high, 10mm diameter

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

PCB fuseholder for 20 x 5mm fuses up to 5A rating 250V AC.

• Moulded in black glass filled nylon
• Operating temperature -40°C to +110°C
• Pin centre 22.5mm
• 24.4mm long, 7mm wide, 11.5mm high
• Supplied as a kit with both holder and carrier
• Camden type CFH14/14HB

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

The ESKA 503.010 Fuseholder is ideal for fuses with a rating of 6.3A. The fuseholder has been designed with solder tags for normal wiring. The fuse holder is supplied in open clip style, horizontal mount.

• Nominal voltage: 250V AC
• Nominal current: 6.3A
• RoHS compliant: Yes

With the ESKA 506.000 Fuseholder, the fuse can be taken out of the holder without tools and examined, even with the power still connected.

• Pitch: 22.5mm
• Suitable for fuses: 5x 20mm
• Nominal voltage: 250V AC
• Nominal current: 6.3A
• Connections: Printed circuit board mounting (PCB)
• Dimensions: 26(W) x 13(H) x 9.5(D)mm
• RoHS compliant: Yes

These R-TECH PCB-mount fuseholders are used to integrate a 5 x 20mm fuse safely within an electric circuit.

They are ideal for general PCB mounted applications. A fuse carrier is available to protect the fused connections or prevent accidental contact.

• Through-hole PCB mount with straight pins for easy assembly
• Recessed hole in base for screw mounting
• Optional clear cover to protect fuse available (part 52-2819)
• UL and VDE approved
• Compliant to EN60127 miniature fuses and general requirements
• Operating Temperature -40°C to 85°C
• Suitable for PCBs up to 3.8mm thick

An R-TECH transparent plastic fuseholder cover that is suitable for use with part 52-2818.

This optional fuse carrier is used to protect the fused connections or prevent accidental contact and enables you to view the fuse without removing the cover.

• Clear cover for use with part 52-2818
• UL and VDE approved
• Compliant to EN60127 miniature fuses and general requirements
• Operating Temperature -40°C to 85°C

An R-TECH 5 x 20mm PCB mount fuseholder with solder pins.

This fuseholder features a vertical bayonet release and is IP40 rated.

These R-TECH fuseholders are used to integrate a 5 x 20mm fuse safely within an electric circuit. They are ideal where a PCB mounted fuse needs to be completely enclosed.

• Vertical mounting
• Bayonet release
• Protected to IP40
• UL and VDE approved
• Compliant to EN60127 miniature fuses and general requirements
• Operating Temperature -40°C to 85°C
• Suitable for PCBs up to 3.5mm thick

An R-TECH 5 x 20mm PCB mount fuseholder with solder pins.

This fuseholder features a horizontal bayonet release and is IP40 rated.

These R-TECH fuseholders are used to integrate a 5 x 20mm fuse safely within an electric circuit. They are ideal where a PCB mounted fuse needs to be completely enclosed.

• Horizontal mounting
• Bayonet release
• Protected to IP40
• UL and VDE approved
• Compliant to EN60127 miniature fuses and general requirements
• Operating Temperature -40°C to 85°C
• Suitable for PCBs up to 3.5mm thick

An R-TECH 5 x 20mm PCB mount fuseholder with solder pins.

This fuseholder is semi-enclosed and is IP40 rated.

These R-TECH PCB-mount fuseholders are used to integrate a 5 x 20mm fuse safely within an electric circuit. They are ideal for applications where fuses can be safely accessed. A fuse carrier is available to protect the fused connections and to ease extraction and insertion.

• Through-hole PCB mount with straight pins for easy assembly
• Optional fuse carrier version to ease fuse insertion and extraction
• Protected to IP40
• Solder pin mounting
• UL and VDE approved
• Compliant to EN60127 miniature fuses and general requirements
• Operating Temperature -40°C to 85°C
• Suitable for PCBs up to 3.5mm thick

An R-TECH 5 x 20mm PCB mount fuseholder with solder pins, supplied with carrier.

This fuseholder is semi-enclosed and is IP40 rated.

These R-TECH PCB-mount fuseholders are used to integrate a 5 x 20mm fuse safely within an electric circuit. They are ideal for applications where fuses can be safely accessed. A fuse carrier is available to protect the fused connections and to ease extraction and insertion.

• Through-hole PCB mount with straight pins for easy assembly
• Optional fuse carrier version to ease fuse insertion and extraction
• Protected to IP40
• Solder pin mounting
• UL and VDE approved
• Compliant to EN60127 miniature fuses and general requirements
• Operating Temperature -40°C to 85°C
• Suitable for PCBs up to 3.5mm thick

This fuseholder from SCI is ideal for vertical mounting to PCBs.

• Accepts 5 x 20mm fuses
• Rated 10A 250V AC
• Body and cap moulded from phenolic
• Cap may be removed by screwdriver or finger release
• Nickel plated brass terminals
• Dimensions 36.5 x 12mm
• UL flame 94V-1 approved