BKL Electronics 072116 For connecting external power sources to a low power or battery-powered device.

• Inside diameter: 2.50mm
• Connection : Soldering
• Connector type: Plug, right angle
• Connector type : Low power connector
• Content: 1 pc
• Inside diameter: 2.5mm
• Manufacturer part No.: 072116
• Outside diameter: 5.5mm
• Shaft length: 9.5mm

A low power horizontally mounted 4.4mm socket.

• Inside diameter 4.4mm
• Nominal current 2A
• Nominal voltage 6.3V DC
• Soldered connection
• 2-Pins
• Pin diameter 1.6mm
• Normally closed

This low power, chassis mounting power supply socket is designed for front-side mounting.

• Rated 2A 18V DC
• Straight connector
• Soldered connection

This low power, chassis mounting power supply socket is designed for front-side mounting.

• Rated 0.5A 12V DC
• Straight connector
• Soldered connection

A cable mount DC power supply plug.

• Size 2.1mm
• Rating 4A 12V DC

A cable mount DC power supply plug.

• Size 1.7mm
• Rating 2A 10.5V DC

A cable mount DC power supply plug.

• Size 3.3mm
• Rating 2A 13.5V DC

A cable mount DC power supply plug.

• Size 4.3mm
• Rating 2A 18V DC

A DC power supply panel mounting socket with break contacts and solder eyes.

• Vertical mounting
• 2-Pin socket
• Size 1.9mm
• Rating 0.5A 12V DC

A low power horizontally mounted 6.0mm socket.

• Inside diameter 6.0mm
• Nominal current 0.5A
• Nominal voltage 12V DC
• Soldered connection
• 2-Pins
• Pin diameter 1.9mm
• Normally closed

A DC power supply panel mounting socket with break contacts and solder eyes.

• Vertical mounting
• 2-Pin socket
• Size 2.35mm
• Rating 1A 12V DC

A DC power supply panel mounting socket with break contacts and solder eyes.

• Vertical mounting
• 2-Pin socket
• Size 2.35mm
• Rating 1A 12V DC

A cable mount DC power supply socket.

• Size 2.0mm
• Rating 1A 12V DC

A cable mount DC power supply plug.

• Size 2.1mm
• Rating 0.5A 12V DC

An angled cable mount DC power supply plug.

• Size 2.1mm
• Rating 0.5A 12V DC

A long cable mount DC power supply plug.

• Size 2.1mm
• Rating 0.5A 12V DC

A short cable mount DC power supply plug.

• Size 2.5mm
• Rating 1A 12V DC

A cable mount DC power supply connector.

• Size 2.1mm
• Rating 0.5A 12V DC

A cable mount DC power supply connector.

• Size 2.5mm
• Rating 1A 12V DC

Line socket designed to accept standard DC power plug with a 2.5mm diameter. Line socket outside diameter is 10mm.

• Ideal for electronic projects, repairs and replacements
• Strong plastic barrel
• Integral moulded strain relief
• Solder termination
• Nickel contacts
• Rated 13.5V @ 2A

These DC power sockets feature the barrel connector that fits the connector found on the lead of most AC mains adaptors. These sockets have been designed for panel fitting and will suit a wide range of appliances.

• Ideal for electronic projects repairs and replacements
• Available as 2.1 and 2.5mm
• Solder termination
• Nickel contacts
• Rating 0.3A 30V DC

A range of DC power plugs featuring the barrel connector that is found on the lead of most AC mains adaptors. These plugs will suit a wide range of appliances.

• Ideal for electronic projects repairs and replacements
• Strong plastic barrel
• Integral moulded strain relief
• Available as 1.3, 2.1, and 2.5mm standard
• Available as 2.1 and 2.5mm long
• Solder termination
• Rating 0.3A 30V DC

A range of DC power plugs featuring the barrel connector that is found on the lead of most AC mains adaptors. These plugs will suit a wide range of appliances.

• Ideal for electronic projects repairs and replacements
• Strong plastic barrel
• Integral moulded strain relief
• Solder termination

A range of DC power plugs featuring the barrel connector that is found on the lead of most AC mains adaptors. These plugs will suit a wide range of appliances.

• Ideal for electronic projects repairs and replacements
• Strong plastic barrel
• Integral moulded strain relief
• Solder termination

A range of DC power plugs featuring the barrel connector that is found on the lead of most AC mains adaptors. These plugs will suit a wide range of appliances.

• Ideal for electronic projects repairs and replacements
• Strong plastic barrel
• Integral moulded strain relief
• Solder termination

A range of DC power plugs featuring the barrel connector that is found on the lead of most AC mains adaptors. These plugs will suit a wide range of appliances.

• Ideal for electronic projects repairs and replacements
• Strong plastic barrel
• Integral moulded strain relief
• Solder termination

A range of DC power plugs featuring the barrel connector that is found on the lead of most AC mains adaptors. These plugs will suit a wide range of appliances.

• Ideal for electronic projects repairs and replacements
• Strong plastic barrel
• Integral moulded strain relief
• Solder termination

Chassis mounting DC power socket with switched contacts, for 2.1mm DC plugs.

• Solder terminals.
• Fixing centres 15.5mm
• 20mm height

High quality chassis mounting DC sockets for 2.1mm power plugs.

• Flush mounting with single hole fixing
• Supplied with hexagonal fixing nut
• Integral break switch on outer contact
• Suitable for panel thickness up to 8mm
• Panel cut–out 12.6mm
• Rating:

High quality chassis mounting DC sockets for 2.5mm power plugs.

• Flush mounting with single hole fixing
• Supplied with hexagonal fixing nut
• Integral break switch on outer contact
• Suitable for panel thickness up to 8mm
• Panel cut–out 12.6mm
• Rating:

Professional grade panel mounting 2.5mm DC power socket, suitable for use with Switchcraft power plugs 20-0882 to 20-0892.

• Panel mounting
• Maximum panel thickness is 3.1mm
• Switched
• Contacts rated at 5A 12V DC
• Switchcraft type 712A

Professional grade PCB panel mounting right angle DC power socket from Switchcraft.

• Connector size 2.5mm
• Panel mounting
• Can be used with all styles of power plug including Switchcraft power plugs 20-0882 to 20-0892
• Switched
• Contacts rated at 5A 12V DC
• Switchcraft type 712RA

Professional grade panel mounting 2.1mm DC power socket, suitable for use with Switchcraft power plugs 20-0882 to 20-0892.

• Panel mounting
• Maximum panel thickness is 3.1mm
• Switched
• Contacts rated at 5A 12V DC
• Switchcraft type 722A

Professional grade PCB panel mounting right angle DC power socket from Switchcraft.

• Connector size 2.1mm
• Panel mounting
• Can be used with all styles of power plug including Switchcraft power plugs 20-0882 to 20-0892
• Switched
• Contacts rated at 5A 12V DC
• Switchcraft type 722RA

Professional grade PCB panel mounting right angle DC power socket from Switchcraft.

• Connector size 1.3mm
• Panel mounting
• Can be used with all styles of power plug including Switchcraft power plugs 20-0882 to 20-0892
• Switched
• Contacts rated at 5A 12V DC
• Switchcraft type 732RA

Professional 2.5mm black screw locking DC power plug from Switchcraft.

• Voltage rating 12V DC
• Current rating 5A
• Connector size 2.5mm

Professional 2.5mm black screw locking DC power plug from Switchcraft.

• Voltage rating 12V DC
• Current rating 5A
• Connector size 2.5mm

Professional 2.5mm red screw locking DC power plug from Switchcraft.

• Voltage rating 12V DC
• Current rating 5A
• Connector size 2.5mm

High quality black PCB mounting DC power socket from Switchcraft with 2.5mm right angled socket..

• Rated at 5A
• Voltage rating: 12 DC/12 AC
• Minimum life of 5000 insertions
• Switchcraft type RAPC712

High quality black PCB mounting DC power socket from Switchcraft with 2.1mm right angled socket..

• Rated at 5A
• Voltage rating: 12 DC/12 AC
• Minimum life of 5000 insertions
• Switchcraft type RAPC722

Surface-mount miniature DC power socket with 2.1mm connector from Switchcraft moulded in high graded thermoplastic to UL 94V-0.

• Colour: black
• Switched
• Contacts rated at 5A 12V DC
• Suitable for 2.1mm plugs
• Switchcraft type RASM732

Professional 2.1mm black screw locking DC power plug from Switchcraft.

• Voltage rating 12V DC
• Current rating 5A
• Connector size 2.1mm

Professional 2.1mm black screw locking DC power plug from Switchcraft.

• Voltage rating 12V DC
• Current rating 5A
• Connector size 2.1mm

High quality 2.5mm heavy duty DC power socket featuring nickel plated body and single hole fixing.

• 24V DC voltage rating
• 1A current rating
• Straight type
• 2.5mm connector size
• Solder lug termination
• Brass contact material
• Nickel contact plating
• Panel cut-out 11mm
• Supplied with hexagonal fixing nut

PCB mounting DC power socket to suit 1.3mm miniature DC power plugs manufactured in PBT.

• PCB mounting
• Can be flush mounted to panel
• Integral switch on outer contact
• Rated voltage30V DC
• Rated current 0.5A

A standard 1.3mm DC power plug with a 9mm long shaft.

• DC power plug
• 12V DC voltage rating
• Straight type
• 1.3mm internal diameter
• Brass contact material
• Black colour
• 9mm shaft length

PCB mounting 2.1 mm connector 30V DC power socket.

• 0.5A current rating
• Right angle type
• Solder lug termination
• Brass contact material
• Black colour
• 100MΩ insulation resistance
• Can be hand wired
• Single pole switch

A long 2.1mm DC power plug with a 14mm long shaft.

• Long DC power plug
• 12V DC voltage rating
• Straight type
• 2.1mm internal diameter
• Brass contact material
• Black colour
• 14mm shaft length

DC power plug, right angle type, 2.1mm connector size.

• Brass contact material
• Black colour
• Nickel contact plating
• Delrin insulator
• Right angle miniature re-wireable power inlet plugs
• 10mm long shaft

High quality single hole 2.1mm chassis mounting DC socket.

• Flush mounting with single hole fixing
• Supplied with hexagonal fixing nut
• Integral break switch on outer contact
• Suitable for panel thickness up to 4.5mm
• Panel cut-out 12.6mm
• Overall dimensions: bezel diameter 14mm, length 15.7mm