Crimp Tool for use with contacts.

• Manual Hand Crimp Tool
• Used for contacts on carrier strip
• Cuts the contacts from the carrier strip
• Manufacturer's part No. 516-280-201

Tool used for removal of contacts from connectors.

• Manufacturer's part No. 516-280-300

Ejection tool fork.

• Manufacturer's part No. 516-280-300-001

Tool for use with installation of contacts.

• Manufacturer's part No. 516-280-400

Hermaphroditic crimp contacts, supplied loose.

• Accommodates wire from 18 to 28 AWG.
• Manufacturer's part No. 516-290-590

Hermaphroditic crimp contacts, supplied in bags of 100.

• Manufacturer's part No. 516-290-590B

A flat gasket seal for Hirschmann GDSN series connectors.

• Compatible with: GDSN series connectors
• Material: NBR
• Temperature range: -30 to +90°C
• Manufacturer type: GDSN 307-4
• Manufacturer part No.: 730 176-002

A profiled gasket for the Hirschmann GDM series.

• Profiled gasket
• Colour: Black
• Compatible with: GDM Series contact box
• Manufacturer type: GDM 3-16
• Manufacturer part No.: 731 531-002

A flat grey gasket suitable for the Hirschmann GDM Series.

• Flat gasket for GDM series cable sockets
• Colour: Grey
• Compatible with: Line socket of GDM-Series
• Manufacturer type: GDM 3-21 EPDM
• Manufacturer part No.: 731 739-004

An electronic insert module for use with square connectors. The insert incorporates a bridge type rectifier and potective circuit (varistor).

• Bridge-connected rectifier insert with protective circuit
• Manufacturer type: GDME GB 1
• Manufacturer part No.: 831 832-001

A round appliance plug with thread and 3 + PE pins.

• Colour: Black
• Connection: Soldering
• Leading contact (PE): Yes
• Number of pins: 3 + PE
• Cable gland, PG 13.5/metric
• Temperature range: -40 - +125 °C
• Manufacturer type: GSP 311
• Manufacturer part No.: 931 297-001

A compact and robust right-angle connector, protected against dust and spray water in accordance with IP65 (DIN VDE 0627/IEC61984). Ideally suited for electrical connections in hydraulic and pneumatic controls in limited spaces.

• Colour: Grey
• Leading contact (PE): Yes
• Number of pins: 4
• Contact resistance ≤ 4mΩ
• 2m integrally moulded lead
• Manufacturer type: G 4 KW 1 F 2M
• Manufacturer part No.: 931 805-602

A black, flanged 4-way panel mounting connector from the Hirschmann 932 092 G 4 A 5 M Series.

• Colour: Black
• Nominal current: 10 A
• Nominal voltage: 50 V
• Number of pins: 4
• Manufacturer type: G 4 A 5 M Black
• Manufacturer part No.: 932 092-100

A 3 + PE cable mounting power socket for applications with higher requirements, such as medical equipment, precision measuring equipment, etc.

• Colour: Grey
• Connections: Screw
• Leading contact (PE): Yes
• Nominal current: 16 A
• Nominal voltage: 400 V
• Protection type: IP54
• Total number of pins: 3 + PE
• Manufacturer type: STAK 3 N
• Manufacturer part No.: 932 140-106

A 3 + PE cable mounting plug for mains power and control line connections in engineering and machine construction. The plug is made of shock-resistant unbreakable polyamide and meets VDE guidelines. Applications include mains voltage feed for applications with higher requirements, such as medical equipment, precision measuring equipment, etc.

• Colour: Grey
• Connection: Screw
• Leading contact (PE): Yes
• Nominal current: 16 A
• Nominal voltage: 400 V
• Protection type: IP54
• Total number of pins: 3 + PE
• Manufacturer type: STAS 3 N
• Manufacturer part No.: 932 143-106

A compact and robust right-angle connector, protected against dust and spray water in accordance with IP65 (DIN VDE 0627/IEC61984). Ideally suited for electrical connections in hydraulic and pneumatic controls in limited spaces.

• Colour: Black
• Leading contact (PE): Yes
• Number of pins: 4
• Cable gland PG 7
• Contact resistance ≤ 4mΩ
• Temination: soldered contacts
• Manufacturer type: G 4 W 1 F black
• Manufacturer part No.: 932 157-100

A black 3 + PE cable socket with PG 7 cable gland and solder contacts from Hirschmann.

• Colour: Black
• Leading contact (PE): Yes
• Number of pins: 3 + PE
• PG 7 cable gland
• Forward resistance ≤4Ω
• Manufacturer type: G 30 W 3 F black
• Manufacturer part No.: 932 186-100

This 2 + PE cable socket with PG11 gland from Hirschmann has a transparent case and a red LED indicator with safety function.

• Cable connection diameter: 4.5 to 11mm (PG11)
• Colour: Transparent
• Leading contact (PE): Yes
• Number of pins: 2 + PE
• Cable gland PG 11
• Temperature range: -40 to +90 °C
• Manufacturer type: GDML 2011 LED 24 HH black
• Manufacturer part No.: 932 336-002

A 6-pin cable socket with PG 7 cable gland and solder contacts from Hirschmann.

• Cable cross section: 0.14 to 0.5 mm²
• Colour: Black
• Connection: Solder
• Leading contact (PE): Yes
• Nominal current: 6A
• Nominal voltage: 250V
• Number of pins: 6
• Contact resistance ≤ 4mΩ
• Manufacturer type: GO 60 WF
• Manufacturer part No.: 932 448-100

A cable socket with PG 11 cable gland and screw contacts.from Hirschmann.

• Cable connection diameter: 4 to 10mm
• Cable cross section: 0.25 to 1mm²
• Colour: Black
• Connection: Screws
• Leading contact (PE): Yes
• Nominal current: 10A
• Nominal voltage: 250V
• Number of pins: 6 + PE
• Contact resistance ≤ 4mΩ
• Manufacturer type: GO 610 WF
• Manufacturer part No.: 932 484-100

A 4 + PE cable mounting power socket for applications with higher requirements, such as medical equipment, precision measuring equipment, etc.

• Colour: Grey
• Connections: Screw
• Leading contact (PE): Yes
• Nominal current: 10 A
• Nominal voltage: 400 V
• Protection type: IP54
• Total number of pins: 4 + PE
• Manufacturer type: STAK 4
• Manufacturer part No.: 932 533-106

A grey 4 + PE moulded-on cable plug with harmonized 1m lead (DIN VDE 0282) and safety bracket.

• Cable length: 1m
• Colour: Grey
• Cross section (based on core number): 5x 0.75 mm²
• Cross section (per pole/core): 0.75 mm²
• Leading contact (PE): Yes
• No. of cores: 5
• Nominal current: 10A
• Nominal voltage: 400V
• Protection class IP54
• Total number of pins: 4 + PE
• Manufacturer type: STAS 4K
• Manufacturer part No.: 932 578-011

A surface mounting 6-pin plug with solder contacts form Hirschmann.

• Colour: Black
• Connection: Solder
• Leading contact (PE): Yes
• Nominal current: 6A
• Nominal voltage: 250V
• Number of pins: 6
• Contact resistance ≤ 4mΩ
• Manufacturer type: GO 60 FAV M
• Manufacturer part No.: 932 918-100

A round appliance plug with screw and 2 + PE pins.

• Colour: Black
• Connection: Soldering
• Leading contact (PE): Yes
• Number of pins: 2 + PE
• Cable gland, PG 13.5/metric
• Temperature range: -40 - +125 °C
• Type (manufacturer type): GSA-U 2000 N LO
• Manufacturer part No.: 933 378-100

A black 2 + PE cable socket with built-in bridge rectifier and varistor circuit protection.

• Cable connection diameter: 4.5 to 11mm
• Colour: Black
• Connection: Screws
• Number of pins: 2 + PE
• Cross-section up to 1.5mm²
• Bridge rectifiers
• Temperature range: -40 to +90 °C
• Manufacturer type: GDML 2016 GB 1 black
• Manufacturer part No.: 934 407-100

This robust right-angle valve connector is dust-proof and splashproof and has a vibration-proof lock. It also features a patented combination terminal that accepts connecting wires with or without wire-end sleeves or fork/ring lugs under the screw head.

• Contact arrangement: Industry standard 11mm
• Cable connection diameter: 4.5 to 10 mm
• Colour: Black
• Leading contact (PE): Yes
• Number of pins: 2 + PE
• M16 cable gland
• Cross section 1.5 mm²
• Temperature range: -40 to +125 °C
• Manufacturer type: GM 216 NJ black
• Manufacturer part No.: 934 456-100