Powerful, cost effective shears from Fortex which have the ability to accurately cut PCB laminates, plastics up to 2mm thick and aluminium up to 1.5mm.

• Access to the cutting area is prevented by heavy Perspex shielding extending along both sides of the blade
• A safety latch is fitted to the pivot to prevent accidental operation
• For positional accuracy the cutting bed is fitted with a metric rule which is recessed to assist in securing the PCB or sheeting whilst cutting
• The unit has a cutting capacity of 203mm (8in.) for normal 1.6mm PCB laminate and is extremely compact with an overall height of only 575mm and a base of 275 x 140mm
• Replacement blade sets are available separately

Replacement PCB shear blades from Mega Electronics, for use with 200mm long PCB shears.

Powerful, cost effective shears from Fortex which have the ability to accurately cut PCB laminates, plastics up to 2mm thick and aluminium up to 1.5mm.

• Access to the cutting area is prevented by heavy Perspex shielding extending along both sides of the blade
• A safety latch is fitted to the pivot to prevent accidental operation
• For positional accuracy the cutting bed is fitted with a metric rule which is recessed to assist in securing the PCB or sheeting whilst cutting
• The shear will cut 1.6mm PCB laminates up to 305mm (12in.) wide and has a height of 670mm and a base of 430 x 135mm

A Red plastic tray, 180 x 105mm, designed for cleaning and polishing small components, etching circuit boards, developing boards with photosensitive surfaces and sorting components.

• Stackable
• Red colour
• Polystyrene
• Base area 180 x 105mm
• Max. working temperature 70°C

A White plastic tray, 180 x 105mm, designed for cleaning and polishing small components, etching circuit boards, developing boards with photosensitive surfaces and sorting components.

• Stackable
• White colour
• Polystyrene
• Base area 180 x 105mm
• Max. working temperature 70°C

A Red plastic tray, 210 x 150mm, designed for cleaning and polishing small components, etching circuit boards, developing boards with photosensitive surfaces and sorting components.

• Stackable
• Red colour
• Polystyrene
• Base area 210 x 150mm
• Max. working temperature 70°C

A White plastic tray, 210 x 150mm, designed for cleaning and polishing small components, etching circuit boards, developing boards with photosensitive surfaces and sorting components.

• Stackable
• White colour
• Polystyrene
• Base area 210 x 150mm
• Max. working temperature 70°C

This fibreglass pencil is used for cleaning printed circuit board tracks and general cleaning of components.

This Glass Fibre Cleaning Pen Replacement Brush 4 x 40mm from PB Fastener & Components is a replacement brush for contact cleaning pen (49-0595).

• Manufacturer's part 1152 008

This Glass Fibre Cleaning Pen from PB Fastener & Components is a versatile instrument that has a number of uses - it can be used for cleaning connection areas on circuit boards and cleaning contacts of all kinds, erasing ink and pencil marks on transparent paper, while removing residues of drawing ink on metal templates.

• Manufacturer's part 1152 011

A pair of syphon tubes with bulb-type priming pump from Rolson. Once the syphon is primed, liquid will flow until the level falls below the bottom of the inlet pipe or until the bleed valve, located on the pump bulb, is opened destroying the syphon action.

• Tough moulded polythene construction
• Suitable for hot and cold liquids
• Temperature range –20 to +80°C
• Suitable for use with most PCB etchants
• May not be suitable for use with solvents such as etch-resist removers
• Flow rate 6.5 litres/min
• Approx. length 540mm
• Supplied in pairs

This fibreglass cleaning pen from RoNa is ideal for fine cleaning and polishing work on circuit boards and metals. The pen can be used with fibreglass, brass and steel brushes and is a must for any workshop, while railway model enthusiasts will also find it invaluable.

• Great for polishing and removing rust
• Handle length: 120mm
• Brush length: 40mm
• Brush diameter: 4mm
• Supplied with 12 fibreglass brushes
• Manufacturer's part 800214

This pack of 12 fibreglass brushes 4mm from RoNa are replacement brushes for the fibre optic cleaning pen 4mm (59-1107).

• Replacement fibreglass brushes
• Brush diameter: 4mm
• Brush length: 4cm
• Manufacturer's part 800215

This fibre optic cleaning pen 2mm from RoNa is ideal for fine cleaning and grinding work on circuit boards and metals. The pen is a must for any workshop, while railway model enthusiasts will also find it invaluable.

• Great for removing rust and polishing
• Handle length; 136mm
• Brush diameter: 2mm
• Supplied with 12 fibreglass brushes
• Manufacturer's part 811968

Specially formulated, ultra-fine non-metallic polishing compound carried in an elastic bonding material.

• Cleans, de-greases and polishes in one simple action
• Simply polish back and forth in straight lines, then wipe with a cloth to remove traces of the abrasive
• Size 30 x 40 x 20mm

This blue etch resist pen from Staedtler is ideal for use on plain copper boards but can be used on almost any surface.

• Suitable for overhead projection
• Excellent smudge-proof and waterproof qualities
• Dries in seconds
• Ideal for left-handed users
• Permanent, low-odour ink
• Polypropylene barrel and cap guarantee long service life
• Can be left uncapped for days without drying up
• Automatic pressure equalisation prevents pen from leaking on board aircraft
• Line width approx. 0.6mm
• Refillable
• Manufacturer's part 318-3

This black etch resist pen from Staedtler is ideal for use on plain copper boards but can be used on almost any surface.

• Suitable for overhead projection
• Excellent smudge-proof and waterproof qualities
• Dries in seconds
• Ideal for left-handed users
• Permanent, low-odour ink
• Polypropylene barrel and cap guarantee long service life
• Can be left uncapped for days without drying up
• Automatic pressure equalisation prevents pen from leaking on board aircraft
• Line width approx. 0.6mm
• Refillable
• Manufacturer's part 318-9

Click here for more details about our range of Staedtler pencils, pens and graphic media.