Bondloc Flange Seal Type B515 is a purple, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal.

Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chain saws, lawn mowers etc.

Specifications:

Colour: Dark Purple PasteFixture Speed No Activator: Up to 12 hours.Fixture Speed With Activator: <2 hours.Viscosity: Paste.Gap fill: 0.5 mm.Flash point: >100°C.Shelf life: 12 months @ 20°C.Specific gravity: 1.10.Max operating temp: -55°C to + 150°C.

Cured Performance:

Full Cure Time: 12 hours.Tensile strength: 8 N/mm(2).Static Shear strength: 12.5 N/mm(2).

Size: 50ml.

Bondloc Gasket Seal Type B518 is a Red, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal.

Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chain saws, lawn mowers etc. Use B518 for dressing gaskets, spacers etc.

Specifications:

Resin: Modified Urethane Acrylate.Colour: Red Paste.Fixture Speed No Activator: Up to 12 hours.Fixture Speed With Activator: <2 hours.Viscosity: >3,500,000 cps.Gap fill: 0.5 mm.Flash point: >100°C.Shelf life: 12 months @ 20°C.Specific gravity: 1.13.Max operating temp: -55°C to + 150°C.

Cured Performance:

Full Cure Time: 12 hours.Tensile strength: 8 N/mm(2).Static Shear strength: 12.5 N/mm(2).

Size: 50ml.

Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines.

Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints.

Specifications:

Resin: Dimethacrylate.Colour: Brown.Fixture Speed No Activator: 10 - 20 mins. Fixture Speed With Activator: <5 mins. Spindle 2 @ 2.5 rpm: 1000 to 2750 cps.Spindle 2 @ 20rpm: 400 to 800 cps.Gap fill: 0.05mm to 0.25 mm.Flash point: >100°C.Shelf life: 2 Years @ 20°C.Specific gravity: 1.06.Max operating temp: -55°C to + 150°C.

Cured Performance:

Full Cure Time: 12 hours.Typical breakway ISO 10964: 15 N.m.Typical prevailing ISO 10964: >8 N.m.DIN 10964 Breakloose: 24 N.m.DIN 10964 Prevailing: 15 to 35 N.m.Typical Break and Prevailing: 20N.m/15N.m.

Bondloc Hydraulic Seal Pneumatic Fittings.

Size: 10ml.

Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines.

Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints.

Specifications:

Resin: Dimethacrylate.Colour: Brown.Fixture Speed No Activator: 10 - 20 mins. Fixture Speed With Activator: <5 mins. Spindle 2 @ 2.5 rpm: 1000 to 2750 cps.Spindle 2 @ 20rpm: 400 to 800 cps.Gap fill: 0.05mm to 0.25 mm.Flash point: >100°C.Shelf life: 2 Years @ 20°C.Specific gravity: 1.06.Max operating temp: -55°C to + 150°C.

Cured Performance:

Full Cure Time: 12 hours.Typical breakway ISO 10964: 15 N.m.Typical prevailing ISO 10964: >8 N.m.DIN 10964 Breakloose: 24 N.m.DIN 10964 Prevailing: 15 to 35 N.m.Typical Break and Prevailing: 20N.m/15N.m.

Bondloc Hydraulic Seal Pneumatic Fittings.

Size: 50ml.

Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate.

Has a good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application, allowing for re-alignment of elbows and joints.

Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils, gases, chemicals, water and steam etc.

Specifications:

Resin: Dimethacrylate.Colour: White paste.Cure speed with activator: Not recommended.Cure speed Without Activator: up to 60 hours.Viscosity Brookfield Sp3 @ 20rpm: 20,000cps.Gap fill / Max threadform: 0.4 mm / M36.Flash Point: >85°C.Shelf Life: 36 months @ 20°C. Specific Gravity: 1.25.Max Operating Temperature: -55°C to + 150°C.

Cured Performance:

Full Cure Time: 60 hours.Typical breakaway strength: 6 N.m.Typical prevailing strength: 2 N.m.

Size: 50ml.

Bondloc B574 is an Instant Gasket material that forms in place, making almost any size and shape, replacing paper, cork etc. It eliminates relaxation and on loads loss. The assembled parts are usually suitable for immediate Low Pressure ( 6 bar) service and once cured can resist 350 Bar Pressure depending on gap size.

Suitable for all formed in place applications such as gear box sealing, pump flanges, transmission assemblies, cover plates on tanks, cam shaft sealing, bearing gaps, outer housings, crank case and sump assemblies and flange pipe fittings.

Specifications:

Resin: Dimethacrylate.Colour: Orange paste.Cure speed with Activator: 10 mins.Cure speed without Activator: 15-30 mins.Viscosity - Brookfield Sp3 @ 20rpm: 50,000cps.Gap Fill/Max Threadform: 0.5mm/M36.Flash Point: >100°C.Shelf Life: 12 months @ 20°C.Specific Gravity: 1.10.Max operating temperature: -55°C to 150°C.

Cured Performance:

Full Cure Time: 24 hours @ 20°C.Breakloose Strength: 8N.m.Static Shear Strength: 10N.m.

Size: 50ml.

Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid.

Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes.

Specification:

Resin: Dimethacrylate.Colour: Yellow.Cure Speed with Activator: <10 minutes.Cure Speed without Activator: <15 mins @ 20°C.Viscosity: >50,000 cps.Gap Fill: 0.05mm to 0.4mm.Flash Point: >100°C.Shelf Life: 12 months @ 20°C.Specific Gravity: 1.09.Max. Operating Temperature: +150°C.

Cured Performance:

Full Cure Time: 6-12 hours.Typical Breakaway Strength: >6 to <15 N/mm (2).Prevailing Torque: >3 to < 9 N/mm (2).Static Shear Strength: >5 to <15 N/mm (2).

Size: 50ml.

Instant gasket material which forms in place, making almost any size and shape, replacing paper, cork etc. Once applied the assembled parts are usually suitable for immediate low pressure (6 bar) service and once cured can resist 350 bar pressure depending on gap size. Display packed.

Easily applied flexible gasket paste, which forms a tough purple temperature resistant gasket. Its high viscosity and fast curing enables the paste to seal almost any size and shape creating an instant low pressure seal while removing the need for traditional paper or cork gaskets. Display packed.

Easily applied flexible gasket paste ideal for aluminium flanges forming a tough red, temperature resistant gasket. Its high viscosity and fast curing enables the paste to seal almost any size and shape creating an instant low pressure seal while removing the need for traditional paper or cork gaskets. Display packed.

Loctite 5188 is a highly flexible sealant which cures when confined in the absence of air between close-fitting metal surfaces and is designed for use on rigid metal flanged connections, particularly where minor oil contamination of the flange surfaces can occur.

This product is particularly suitable for use on aluminium substrates where very good adhesion is needed. It ensures an instant, low-pressure seal.

• Excellent in demanding applications
• Excellent chemical resistance
• Superior adhesion
• Can tolerate slight oil contamination on the flange surface
• Supplied in 300ml container
• Manufacturer's part 1104312

Loctite 5188 is a highly flexible sealant which cures when confined in the absence of air between close-fitting metal surfaces and is designed for use on rigid metal flanged connections, particularly where minor oil contamination of the flange surfaces can occur.

This product is particularly suitable for use on aluminium substrates where very good adhesion is needed. It ensures an instant, low-pressure seal.

• Excellent in demanding applications
• Excellent chemical resistance
• Superior adhesion
• Can tolerate slight oil contamination on the flange surface
• Supplied in 50ml container
• Manufacturer's part 1254415

Loctite 509 is a flexible sealant that withstands minor flange movement caused by vibrations. Applications include gearbox and engine casings.

• Fluorescent blue properties allow easy visual inspection during assembly
• Will not run when applied to vertical surfaces
• Flexible at temperatures up to 149°C (300°F)
• Thixotropic
• Medium strength
• Supplied in 315ml container
• Manufacturer's part 135246

LOCTITE® 128068™ is a ready-to-use, one component, gel-like anaerobic flange sealant that cures at room temperature when it is isolated from air contact. However, it is designed to cure slowly to avoid shimming between flanges.

It seals close-fitting joints between rigid metal faces and flanges and will flex with minor flange movements. It provides resistance to low pressures immediately after assembly of flanges. It is typically used as a form-in-place gasket for transmission housings and axle covers.

• Rate of cure will depend on the substrate used
• Ambient temperature curing
• Should not begin to cure for at least 30 minutes on steel
• Rate of cure depends on the bond-line gap
• Not designed for use with gaps in excess of 0.1mm
• Supplied in a 300ml pack
• Loctite type 128068

Loctite 5922 improves the sealing performance of old and new pre-cut gaskets and is ideal for re-assembly after repairs.

• Improves the sealing performance of old and new pre-cut gaskets (paper, cork, felt, etc.)
• Suitable for parts which require disassembly
• Ideal for part assembly after repairs
• Slow curing paste
• Sets to a permanently flexible, non-hardening film
• Flange type: Rigid or flexible
• Service temperature range: -54 to +204°C
• Good oil, water and glycol resistance
• Supplied in a 60ml pack
• Loctite type 5922

Loctite 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces and is ideal for use on rigid flanges. Typical applications include sealing flange faces on transmissions and engine casings, ensuring an instant, low-pressure seal.

• Adapts to flange surface irregularities and scratches up to 0.25mm
• Service temperature range: -75 to +200°C
• Increases the torque capacity of assembled flanges
• P1 NSF Reg. No. 123007
• Supplied in container of 50ml
• Manufacturer's part 142608

Loctite 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces and is ideal for use on rigid flanges. Typical applications include sealing flange faces on transmissions and engine casings, ensuring an instant, low-pressure seal.

• Adapts to flange surface irregularities and scratches up to 0.25mm
• Service temperature range: -75 to +200°C
• Increases the torque capacity of assembled flanges
• P1 NSF Reg. No. 123007
• Supplied in container of 250ml
• Manufacturer's part 142609

Loctite 573 seals close-fitting joints between rigid metal faces and flanges and is the ideal product for part assembly jobs extending over several hours. The product cures when confined in the absence of air between close-fitting metal surfaces. The nature of Loctite 573 reduces the migration of liquid product after application to the part.

• Typically used as a form-in-place gasket on rigid flanged connections
• Ideal for sealing large, rigid metal flanges or flanges where assembly may take several hours
• Supplied in 250ml container
• Manufacturer's part 142614

Loctite 5800 seals close-fitting joints between rigid metal faces and flanges. It cures when it is confined, in the absence of air, between close-fitting metal surfaces. It can be used as a form-in-place gasket on rigid flanged connections and provides resistance to low pressures immediately after assembly.

Loctite 5800's key differentiator is the 'White' Material Safety Data Sheet. It carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.

• 'White' Material Safety Data Sheet
• No hazard symbols, risk phrases or safety phrases
• General purpose liquid sealant for close-fitting joints between rigid metal faces and flanges
• Excellent chemical and temperature resistance when cured
• Instant low-pressure seal
• Excellent resistance to oil, water and glycol
• Gap (max.): 0.3mm
• Supplied in a 50ml applicator
• Loctite type 5800

Loctite 5800 seals close-fitting joints between rigid metal faces and flanges. It cures when it is confined, in the absence of air, between close-fitting metal surfaces. It can be used as a form-in-place gasket on rigid flanged connections and provides resistance to low pressures immediately after assembly.

Loctite 5800's key differentiator is the 'White' Material Safety Data Sheet. It carries no hazard symbols, risk or safety phrases and does not contain any declarable carcinogens, mutagens or reproductive toxins.

• 'White' Material Safety Data Sheet
• No hazard symbols, risk phrases or safety phrases
• General purpose liquid sealant for close-fitting joints between rigid metal faces and flanges
• Excellent chemical and temperature resistance when cured
• Instant low-pressure seal
• Excellent resistance to oil, water and glycol
• Gap (max.): 0.3mm
• Supplied in a 300ml applicator
• Loctite type 5800

Loctite SI 5970 is a silicone sealant that cures, on exposure to moisture in the air, to form a tough rubber gasket. It has been designed primarily for flexible flange sealing and is ideal for use where high vibration or flexing occurs. Loctite 5970 is tack-free after just 25 minutes and can be used on machined or cast, metal or plastic and painted parts.

• Replacement for cork and paper cut gaskets on flanges and stamped sheet metal covers
• Ideal for use where high vibration or flexing occurs
• Can be used with metal, plastic and painted parts
• Colour: Black
• Max. gap size: 1mm
• Service temperature range: -50 to + 200°C
• Tensile shear strength in N / mm²: 1.5
• Tack-free after 25 minutes
• Cure through volume in 24 hours: 2.5mm
• Supplied in a 50ml applicator
• Loctite type SI 5970

Loctite SI 598 is a metallic black single part thixotropic room temperature vulcanising oxime silicone paste sealant. It cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket and resists ageing, weathering and thermal cycling without hardening, shrinking or cracking. This product is typically used in applications with an operating range of -54 to +260°C.

• Excellent resistance to automotive engine oils
• Enhances load bearing and shock absorbing characteristics of bond area
• Typical applications include oil pans, transmission pans, valve covers, valves and guides, timing gear covers, and differential covers
• Supplied in a 300ml tube
• Manufacturer's part 2061029

Loctite SI 5970 is a silicone sealant which cures on exposure to moisture in the air to form a tough rubber gasket. This product is designed primarily for flexible flange sealing and is ideally used where high vibration or flexing occurs. It can be used on machined or cast surfaces, metal, plastic or painted parts.

• Replacement for cork and paper cut gaskets on flanges and stamped sheet metal covers
• Can be used with plastic and painted parts
• Tack-free after 25 minutes
• Supplied in 300ml container
• Manufacturer's part 2061041

Loctite SI 5920 is a moisture-curing, non-corrosive silicone. Its thixotropic nature reduces the migration of liquid product after application to the substrate. Loctite SI 5920 has been designed specially for gasketing and sealing applications where excellent temperature resistance is required. It can also be used for electrical insulating applications and is typically used in applications up to 350°C.

• Colour: Copper
• Service temperature range: -60 to +350°C
• Tensile shear strength: 1.4N/mm²
• Max. gap: 1mm
• Skin-over time: 40 minutes
• Cure-through volume in 24 hours: 2.5mm
• Strength: Low
• Cure method: Moisture (Silicone)
• Supplied in an 300ml cartridge
• Manufacturer's part 2061261/STRONG>

Loctite SI 5910 has been designed for use with flexible flanges, machined or cast, metal or plastic surfaces.

• Colour: Black
• Service temperature range: -60 to +200°C
• Tensile shear strength: 1.2N/mm²
• Max. gap: 1mm
• Skin over time: 40min.
• Cure through volume in 24 hours: 2.75mm
• Strength: Low
• Cure method: Moisture (Silicone)
• Supplied in a 300ml cartridge
• Manufacturer's part 2061753

Loctite SI 5900 is a black, thixotropic paste with excellent performance when used with engine oils.

• Colour: Black
• Service temperature range: -55 to +200°C
• Tensile shear strength: 1.2N/mm²
• Max. gap: 1mm
• Skin over time: 15 min.
• Cure through volume in 24 hours: 2.5mm
• Strength: Low
• Cure method: Moisture (Silicone)
• Supplied in a 300ml pack
• Manufacturer's part 2061874

Loctite 518 is a medium-strength sealant which cures when confined in the absence of air, e.g., between close-fitting metal surfaces. Typical applications include sealing close-fitting joints between rigid metal faces and flanges.

Loctite 518 provides resistance to low pressures immediately after assembly of flanges. It is typically used as a form-in-place gasket on rigid flanged connections, e.g., transmissions and engine casings.

• Medium-strength anaerobic gasket for metal flanges
• Gel-type consistency
• Ideal for overhead application and vertical faces (no dripping)
• Adapts to flange surface irregularities and scratches up to 0.25mm
• Seals instantly against low pressure
• P1 NSF Reg. No: 123758
• Supplied in a 50ml syringe
• Loctite type 518

Loctite 518 is a medium-strength sealant which cures when confined in the absence of air, e.g., between close-fitting metal surfaces. Typical applications include sealing close-fitting joints between rigid metal faces and flanges.

Loctite 518 provides resistance to low pressures immediately after assembly of flanges. It is typically used as a form-in-place gasket on rigid flanged connections, e.g., transmissions and engine casings.

• Medium-strength anaerobic gasket for metal flanges
• Gel-type consistency
• Ideal for overhead application and vertical faces (no dripping)
• Adapts to flange surface irregularities and scratches up to 0.25mm
• Seals instantly against low pressure
• P1 NSF Reg. No: 123758
• Supplied in a 300ml syringe
• Loctite type 518

Loctite 518 is a medium-strength sealant which cures when confined in the absence of air, e.g., between close-fitting metal surfaces. Typical applications include sealing close-fitting joints between rigid metal faces and flanges.

Loctite 518 provides resistance to low pressures immediately after assembly of flanges. It is typically used as a form-in-place gasket on rigid flanged connections, e.g., transmissions and engine casings.

• Medium-strength anaerobic gasket for metal flanges
• Gel-type consistency
• Ideal for overhead application and vertical faces (no dripping)
• Adapts to flange surface irregularities and scratches up to 0.25mm
• Seals instantly against low pressure
• P1 NSF Reg. No: 123758
• Supplied in a 65ml syringe
• Loctite type 518

Loctite 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces and is ideal for use on rigid flanges. Typical applications include sealing flange faces on transmissions and engine casings, ensuring an instant, low-pressure seal.

• Adapts to flange surface irregularities and scratches up to 0.25mm
• Service temperature range: -75 to +200°C
• Increases the torque capacity of assembled flanges
• P1 NSF Reg. No. 123007
• Supplied in container of 160ml
• Manufacturer's part 230410

Loctite® 5999 is a heavy body, high performance RTV grey silicone gasket maker ideal for rigid flange assemblies.

• Provides instant seal
• Excellent fluid resistance
• Non-corrosive, low odour, low volatility
• Grey colour
• Supplied in cartridge of 300ml
• Manufacturer's part 231230

Loctite 574 seals close-fitting joints between rigid metal faces and flanges and provides resistance to low pressures immediately after assembly. The product cures when confined in the absence of air between close-fitting metal surfaces. Typically used as a form-in-place gasket on rigid flanged connections. The nature of Loctite 574 reduces the migration of liquid product after application to the substrate.

• Ideal for use on rigid metal parts, e.g. cast iron components and pump housings
• High oil resistance
• Excellent water and glycol resistance
• Supplied in container of 250ml
• Manufacturer's part 231561

Loctite 574 seals close-fitting joints between rigid metal faces and flanges and provides resistance to low pressures immediately after assembly. The product cures when confined in the absence of air between close-fitting metal surfaces. Typically used as a form-in-place gasket on rigid flanged connections. The nature of Loctite 574 reduces the migration of liquid product after application to the substrate.

• Ideal for use on rigid metal parts, e.g. cast iron components and pump housings
• High oil resistance
• Excellent water and glycol resistance
• Supplied in container of 50ml
• Manufacturer's part 234534

Loctite 574 seals close-fitting joints between rigid metal faces and flanges and provides resistance to low pressures immediately after assembly. The product cures when confined in the absence of air between close-fitting metal surfaces. Typically used as a form-in-place gasket on rigid flanged connections. The nature of Loctite 574 reduces the migration of liquid product after application to the substrate.

• Ideal for use on rigid metal parts, e.g. cast iron components and pump housings
• High oil resistance
• Excellent water and glycol resistance
• Supplied in container of 160ml
• Manufacturer's part 234538

Hylomar Jointing Compound from Rocol is a blue non-setting sealant for the effective sealing of metal to metal and most plastic to plastic components. It can withstand high temperatures and vibration often found in demanding jointing applications and is particularly effective for sealing flanges subjected to extreme vibration and distortion.

• Excellent temperature range from -50°C to 250°C
• Can resist pressures of up to 35 bar (500 psi)
• Joints sealed are easy to break and clean
• Non-setting and non-hardening and resists vibration, thermal expansion and contraction of joints
• Supplied in tube of 100g
• Manufacturer's part 28060

For ease of assembly and creates gastight exhaust joints. Suitable for use with Model No. AK4802 Caulking Gun.

An instant seal at low pressure. Used for fine and coarse threads up to 75mm(3") in diameter. 60 Hours to fully cure, which allows time to realign joints. Contains PTFE which seals against oils, gases and chemicals. Tear and shred resistant. Supplied in a concertina applicator.

Immediate low resistance on assembly and cures once confined in the absence of air in close fitting joints. High oil resistance with water and glycol tolerance. Supplied in an easy to use concertina applicator.

Gasket sealant to replace original gaskets. Used as an adhesive to bond metal, rubber and glass etc. Supplied in a flow controllable power can. Temperature range -50°C to 180°C.