Concept Spurt / Foam Gun 210003 has a new and improved design that allows one handed use. A quality gun with a non-stick coated needle and adaptor, which keeps the gun clean, and unequalled air tightness essential to ensure the gun does not let you down.

For use with polyurethane expanding foam cartridges.

Firefoam B1 Gun Grade is a quick-setting fire rated, one part polyurethane foam. It expands on application to yield up to 50 times the can contents and meets the extremely stringent requirements of the text criteria DIN 4102 Part 1 for Construction Materials, Class B1 and BS 476 Part 20. Fire rated up to 4 hours in certain joint configurations. For use with an Everbuild Professional Foam Gun, once cured the foam can be cut, sawn or plastered over after only one hour.

Firefoam B2 Gungrade is a quick setting fire rated, one part polyurethane foam designed for application by any standard foam applicator gun. Fire resistant for up to 2 hours in certain joint configurations. It expands on application to up to 50 times the can contents and meets the requirements of the test criteria for BS476 Part 20. FOR PROFESSIONAL USE ONLY.

Firefoam B2 Handheld is a quick setting fire rated, one part polyurethane foam in a ready to use hand held canister. Fire resistant for up to 2 hours in certain joint configurations. It expands on application to up to 50 times the can contents and meets the requirements of the test criteria for BS 476 Part 20.

Exact Gap Foam has been formulated to provide a more precise foam product that only expands by between 5-10% from the bead extruded on application. The controlled application significantly reduces the amount of cured excess foam that has to be cut back afterwards, the waste disposal of which can be difficult on some sites, and reduces the danger of wet foam falling onto the floor and surrounding substrates, and the damage and staining this can cause. It is also the ideal product to use where it is important not to impact too much stress onto the item being installed. Gloves are included in the cap.

Exact Gap Foam has been formulated to provide a more precise foam product that only expands by between 5-10% from the bead extruded on application. The controlled application significantly reduces the amount of cured excess foam that has to be cut back afterwards, the waste disposal of which can be difficult on some sites, and reduces the danger of wet foam falling onto the floor and surrounding substrates, and the damage and staining this can cause. It is also the ideal product to use where it is important not to impact too much stress onto the item being installed. Gloves are included in the cap.

Fix & Fill Expanding Foam is a quick setting polyurethane based foam which expands greatly on application and yields up to 50 times original can contents. Can be cut, sawn, plastered and sealed over after approximately one hour. Fills irregular gaps, fixes framework, insulates and sound deadens. Cans are fully litho printed for effective display. Gloves are included in the cap.

Fix & Fill Expanding Foam is a quick setting polyurethane based foam which expands greatly on application and yields up to 50 times original can contents. Can be cut, sawn, plastered and sealed over after approximately one hour. Fills irregular gaps, fixes framework, insulates and sound deadens. Cans are fully litho printed for effective display. Gloves are included in the cap.

Firefoam B1 Handheld is a quick-setting fire rated, one part polyurethane foam. It expands on application to yield up to 50 times the can contents and meets the extremely stringent requirements of the test criteria BS476 Part 20, Class B1. Fire rated up to 4 hours in certain joint configurations. Once cured, the foam can be cut, sawn or plastered over after approximately one hour.

Gun Grade Expanding Foam from Everbuild is a quick setting polyurethane based foam which expands greatly on application and yields up to 50 times original can contents. Can be cut, sawn, plastered and sealed over after approximately one hour.

• Fills irregular gaps
• Fixes framework
• Insulates and deadens sound
• Designed for professional use in conjunction with gun foam applicators
• Supplied in canister of 750ml
• Manufacturer's part EVGF7

The Everbuild Thermofoam Insulation Foam is a specially formulated, highly flexible PU foam that absorbs component movement thereby giving an air tight seal to reduce heat loss and improve energy efficiency in buildings. It adheres to all common building materials including concrete, brickwork, wood, plaster, plastic, stone, metal etc.

Thermofoam has been tested to the latest standard and is not only air permeability tested to EN12114:200-03 but also acoustic rated to EN ISO 717-1 up to 64Db, temperature resistant (-40 to 80°C) and finally fire rated to ISO 13501 Class E.

Areas for Use

• Window installation (clean, controlled back filling and insulated sealing of window and external roller blind cavities).

• Gap filling of external door frames (must be used in conjunction with mechanical fixings).

• Filling cavities in wall break-through for all types of utilities and services.

Specification

Colour: Off White.Size: 750ml.

Everbuild P45 Medium-Duty Metal Foam Gun gives the user more control to apply the foam precisely in hard to reach places, saving unnecessary wastage.

For both professional and DIY use.

P65 Foam Gun gives the user more control to apply the foam precisely in hard to reach places, saving unnecessary wastage. For professional use.

Dual Purpose Foam Cleaner is used to remove wet/uncured foam. Attaches to Gun Foam Applicator for purging through, also includes spray nozzle for use without applicator to remove wet foam from outside of the gun and from most building substrates.

Using new foam technology, No Waste Foam is the first Hand Held Foam that allows part used cans to be saved and used again and has a shelf life of 24 months, compared with 12 months for conventional foams. Its unique safety valve will not clog or leak, guaranteed to work everytime.

This Faithfull high-quality Foam (Spurt) Gun is designed for use with standard 500/750ml gun grade Polyurethane pressurised expanding foam canisters.

The gun has a sprung trigger mechanism and flow adjuster knob to ensure fine control over the foam output, and to provide a clean, even bead for the accurate installation of the foam which helps to reduce waste. The barrel is hermetically sealed once the trigger has been released to prevent the hardening of the foam when left in the gun.

The Foam Gun has non-stick coated needle and canisters fitting valve and a stainless steel barrel to help make cleaning the gun easier. It is supplied complete with two types of additional plastic extension barrels to give better access when used in certain applications.

Ideal for the following applications:Installation of door and window frames.Filling and sealing of cavities and joints.Pipe or cable penetrations in walls.Sealing joints in wall insulation sheets.

Supplied with:2 x Long plastic extension barrels.2 x Short plastic narrow access barrels.

Faithfull Heavy-Duty Foam Gun (Full Non Stick Body) is a high quality professional foam (spurt) gun designed for use with standard 500ml and 750ml gun grade Polyurethane pressurised expanding foam canisters.

The features of this gun include a sprung trigger mechanism and Micro-fast foam flow adjustment system allowing the user fine control over the foam output, to provide a clean even bead for the accurate installation of the foam and to help reduce waste. The barrel is hermetically sealed once the trigger has been released to prevent the hardening of the foam when left in the gun.

Additional features include a fully coated non-stick body, a non-stick coated needle and canister fitting valve and a stainless steel barrel to help make cleaning the gun easier.

The gun is supplied complete with two types of additional plastic extension barrels to give better access when used in certain applications;

2 x Long plastic extension barrels.2 x Short plastic narrow access barrels.

Applications include the installation of door and window frames, filling and sealing of cavities and joints, pipe or cable penetrations in walls and the sealing of joints in wall insulation sheets.

Polycell Expanding Foam Polyfilla is ideal for filling and sealing awkward gaps, hollows and cavities. It shoots liquid foam deep into cavities, creating a long lasting seal, which insulates against heat, sound and moisture. Suitable for internal or external use, it can be easily trimmed and sanded ready to be painted, filled or plastered.

Contains a CFC - free propellant.

Size: 500ml.

Polycell Expanding Foam Polyfilla is ideal for filling and sealing awkward gaps, hollows and cavities. It shoots liquid foam deep into cavities, creating a long lasting seal, which insulates against heat, sound and moisture. Suitable for internal or external use, it can be easily trimmed and sanded ready to be painted, filled or plastered.

Contains a CFC - free propellant.

Size: 300ml.

Polycell Expanding Foam Polyfilla is ideal for filling and sealing awkward gaps, hollows and cavities. It shoots liquid foam deep into cavities, creating a long lasting seal, which insulates against heat, sound and moisture. Suitable for internal or external use, it can be easily trimmed and sanded ready to be painted, filled or plastered.

Contains a CFC - free propellant.

Size: 825ml.

Ronseal Quick Drying and Expanding Foam Filler is ideal for filling large and awkward size gaps & cavities on interior and exterior surfaces.

The quick drying formula can be used on wood, metal, glass or masonry, yielding up to 2.5 times its initial volume to fill any size repair.

The simple to use trigger applicator ensures smooth consistent filling of the hole minimising any overfill, whilst the advanced liquid foam can be used to provide insulation against heat, sound and moisture.

Quick drying - dries in 1 hour.Fills large holes - foam expands to 2.5 times its size.Will not shrink or crack.Easy to cut or sand.Can be overpainted.For interior and exterior use

Size: 300ml.

Ronseal Quick Drying and Expanding Foam Filler is ideal for filling large and awkward size gaps & cavities on interior and exterior surfaces.

The quick drying formula can be used on wood, metal, glass or masonry, yielding up to 2.5 times its initial volume to fill any size repair.

The simple to use trigger applicator ensures smooth consistent filling of the hole minimising any overfill, whilst the advanced liquid foam can be used to provide insulation against heat, sound and moisture.

Quick drying - dries in 1 hour.Fills large holes - foam expands to 2.5 times its size.Will not shrink or crack.Easy to cut or sand.Can be overpainted.For interior and exterior use

Size: 500ml.

This Roughneck Professional Foam Gun has a large, sturdy metal body with a comfortable soft grip, making it suitable for long working periods.

The Foam Gun has a nickel-plated aluminium body, steel trigger, brass barrel and non-return PTFE ball. Its brass needle has a non-stick coating and an aluminium can holder adaptor.

Ideal for the following applications:

Filling:Gaps in brick, concrete, stone and plaster.Gaps and holes around pipe work and duct work.Spaces around window frames and door frames.Deep joints before applying plaster or sealant.

Insulating: Internally for exterior walls.Soffits and barge boards.

Supplied complete with:2 x long plastic extension tubes.2 x plastic nozzles.

This Roughneck Professional Foam Gun has a large, sturdy metal body with a comfortable soft grip, making it suitable for long working periods.

The Foam Gun has a brass barrel, needle and nozzle with non-stick coating. The aluminium body is also coated with a non-stick coating. With flow adjusting knob for greater control and can holder adaptor.

Ideal for the following applications:

Filling:Gaps in brick, concrete, stone and plaster.Gaps and holes around pipe work and duct work.Spaces around window frames and door frames.Deep joints before applying plaster or sealant.

Insulating: Internally for exterior walls.Soffits and barge boards.

Supplied complete with:2 x long plastic extension tubes.2 x plastic nozzles.