An aluminium calorimeter, with parallel sides and a rolled rim.

• Size 100 x 75mm diameter
• Eisco type PH0440B

Note: Stirrer not included.

A copper calorimeter, with parallel sides and a rolled rim.

• Size 100 x 75mm diameter
• Eisco type PH0438B

Note: Stirrer not included.

A copper calorimeter, with parallel sides and a rolled rim.

• Size 75 x 50mm diameter
• Eisco type PH0438A

Note: Stirrer not included.

This metal block calorimeter can be used for the experimental determination of the specific heat capacity of aluminium.

The cylindrical block has a mass of 1kg adjusted to an accuracy of 2%. The block is drilled with two holes: a larger 12.5mm central hole for a special immersion heater and a smaller hole 7.5mm diameter for a thermometer or temperature sensor.

• Metal: aluminium
• Diameter 76mm
• Height 86mm
• Specific heat 878J/kg/K
• Eisco type PH0435A

This metal block calorimeter can be used for the experimental determination of the specific heat capacity of brass.

The cylindrical block has a mass of 1kg adjusted to an accuracy of 2%. The block is drilled with two holes: a larger 12.5mm central hole for a special immersion heater and a smaller hole 7.5mm diameter for a thermometer or temperature sensor.

• Metal: brass
• Diameter 44mm
• Height 86mm
• Specific heat 368J/kg/K
• Eisco type PH0435D

This metal block calorimeter can be used for the experimental determination of the specific heat capacity of copper.

The cylindrical block has a mass of 1kg adjusted to an accuracy of 2%. The block is drilled with two holes: a larger 12.5mm central hole for a special immersion heater and a smaller hole 7.5mm diameter for a thermometer or temperature sensor.

• Metal: copper
• Diameter 44mm
• Height 81mm
• Specific heat 361J/kg/K
• Eisco type PH0435C

This metal block calorimeter can be used for the experimental determination of the specific heat capacity of steel.

The cylindrical block has a mass of 1kg adjusted to an accuracy of 2%. The block is drilled with two holes: a larger 12.5mm central hole for a special immersion heater and a smaller hole 7.5mm diameter for a thermometer or temperature sensor.

• Metal: mild steel
• Diameter 44mm
• Height 91mm
• Specific heat 480J/kg/K
• Eisco type PH0435B

EISCO PH0436 Heater Immersion For Use with Metal Block Calorimeter is specifically designed for use with metal block calorimeter. It features heat resisting insulation, terminating in 4mm sockets.

12 volts, 50 watts.

Battery measures 4 inches long, wires each measure 17.5 inches. Total length is approximately 21.5 inches.

• Manufacturers Code - PH0436

A Joule's Calorimeter for experimenting with the conversion of electrical energy into heat energy. The calorimeter consists of a nickel-plated copper outer vessel with a lagged copper inner vessel. The cover has terminals for the 3 to 6V heating coil, a built-in stirrer and a hole for a thermometer to record the temperature changes.

• Apparatus for experimenting with the conversion of electrical energy into heat energy
• Nickel-plated copper outer vessel
• Copper inner vessel
• Felted wool cloth lagging
• Outer vessel is 100mm tall and 75mm in diameter
• Inner vessel is 75mm tall and 50mm in diameter
• 3 to 6V heating coil, Max. current 1A
• Built-in stirrer

Note: Thermometer not included.