The Genie 08 Activity PCB is the bare PCB from the GENIE 08 Activity Kit, which is a fun introduction to the GENIE microcontroller system with lights to flash and noises to make. It has spaces to solder a push button and a light sensor (LDR) which your software could watch for user inputs making it an interactive project. There are also spaces for two LEDs, and a sounder for making tones. Use with the GENIE Flowchart programming system to create programmes which you can download to your assembled board and test.

Supplied as a bare board only, the parts list and assembly instructions are in the PDF on this page. Once assembled, connect it to a PC running the GENIE software and start coding.

• Flash LEDs or make tones
• Read the push button or the light sensor inputs
• Free, user-friendly GENIE Flowchart programming software
• Learn soldering, coding and debugging

A programming download cable is also required, choose from a serial cable (13-0847) or a USB cable (13-6023).

The Genie 08 Jukebox Kit is a fun introduction to the GENIE microcontroller system with stereo sounders and lights to flash. It also has a push button your code can watch for user input making it an interactive kit. There are two LEDs, 1 x red, 1 x green and 2 x sounders for making tones. Use the GENIE Flowchart programming system to create programmes which you can download to your Jukebox Kit and test. Supplied as a kit of parts for you to solder together using the instructions in the PDF on this page. Once assembled, connect it to a PC running the GENIE software and start coding.

• Flash LEDs and make tones
• Read the push button
• Free, user-friendly GENIE Flowchart programming software
• Learn soldering, coding and debugging
• Measures 49 x 52mm

Note: These kits are supplied with Version 2 GENIE microcontrollers. To program them, Circuit Wizard 3 or the free GENIE Programming Editor software is required.

Note: The GENIE Design Studio software is free to download directly from www.genieonline.com.

A programming download cable is also required, choose from a serial cable (13-0847) or a USB cable (13-6023).

The Genie 08 Jukebox PCB is the bare PCB from the GENIE 08 Jukebox Kit which is a fun introduction to the GENIE microcontroller system with spaces for stereo sounders and lights to flash. It also has space for a push button your code can watch for user input making it an interactive project. There are spaces for two LEDs, and 2 x sounders for making tones. Once you have gathered the parts and assembled the board, use the GENIE Flowchart programming system to create programmes which you can download to your Jukebox Kit and test.

Supplied as a bare board only, the parts list and the instructions are in the PDF on this page. Once assembled, connect it to a PC running the GENIE software and start coding.

• Flash LEDs and make tones
• Read the push button
• Free, user-friendly GENIE Flowchart programming software
• Learn soldering, coding and debugging
• Measures 49 x 52mm

The GENIE 08 Project kit is a handy way of adding intelligence to other projects or to learn about the different types of inputs and outputs the GENIE08 can handle. It has 1 x green LED connected to the G0 line plus 1 x low-power output (25mA), 1 x medium power output (100mA), 1 x digital input and 1 x analogue or digital input. Use the GENIE Flowchart programming system to create programmes which you can download to your Project Kit and test. Supplied as a kit of parts for you to solder together using the instructions in the PDF on this page. Once assembled, connect it to a PC running the GENIE software and start coding.

• Free, user-friendly GENIE Flowchart programming software
• Learn soldering, coding and debugging

Note: These kits are supplied with Version 2 GENIE microcontrollers. To program them, Circuit Wizard 3 or the free GENIE Programming Editor software is required.

Note: The GENIE Design Studio software is free to download directly from www.genieonline.com.

A programming download cable is also required, choose from a serial cable (13-0847) or a USB cable (13-6023).

The GENIE 08 Project PCB is the bare PCB from the GENIE 08 Project kit, which is a handy way of adding intelligence to other projects or to learn about the different types of inputs and outputs the GENIE08 can handle. It has space for 1 x LED connected to the G0 line plus 1 x low-power output (25mA), 1 x medium power output (100mA), 1 x digital input and 1 x analogue or digital input. Once you have gathered the parts and assembled the board, use the GENIE Flowchart programming system to create programmes which you can download to your project and test.

Supplied as a bare board only, the parts list and instructions are in the PDF on this page. Once assembled, connect it to a PC running the GENIE software and start coding.

• Free, user-friendly GENIE Flowchart programming software
• Learn soldering, coding and debugging

A programming download cable is also required, choose from a serial cable (13-0847) or a USB cable (13-6023).

This PCB is designed as part of the GENIE 14 Audio Kit.

This 50mm loudspeaker has been designed for use with the GENIE 14 Audio Kit.

A PCB board for use with the GENIE 18-pin activity kit 13-6014

• Enables the design of custom projects

A PCB board for use with the GENIE 18-pin motor kit 13-6016

• Enables the design of custom projects

A PCB board for use with the GENIE 18-pin project kit 13-6015

• Enables the design of custom projects

Another from the GENIE ELITE range and featuring the GENIE 18 microcontroller this project board is ideal as a basic board for adding intelligence to design or electronic projects. The analogue or digital inputs and the medium power outputs, together with the driver chip which drives even higher power outputs, make this a powerful design tool.

Note: These kits are supplied with Version 2 GENIE microcontrollers. To program them, Circuit Wizard 3.5 or the free GENIE Programming Editor software is required.

• Developed by the authors of Livewire, PCB Wizard and Circuit Wizard
• Free, user-friendly GENIE flowchart programming software
• On-screen monitoring and calibration of digital and analogue signals
• Supports advanced I/O such as events, interrupts and infrared
• Also available are the PCB boards associated with these kits, enabling the design of custom projects
• Download cables are not supplied but are also available, see 13-0847 or 13-6023

Note: The GENIE Design Studio software is free to download directly from www.genieonline.com.

From the GENIE ELITE range this powerful board, at the heart of which is the GENIE 18 microcontroller, provides the solution for adding motor control to design projects. Connect a control signal to the analogue or digital inputs and wire up a DC, stepper or servo motor to the outputs for precise forward and backwards control.

Note: These kits are supplied with Version 2 GENIE microcontrollers. To program them, Circuit Wizard 3.5 or the free GENIE Programming Editor software is required.

Note: The GENIE Design Studio software is free to download directly from www.genieonline.com.

• Developed by the authors of Livewire, PCB Wizard and Circuit Wizard
• Free, user-friendly GENIE flowchart programming software
• On-screen monitoring and calibration of digital and analogue signals
• Supports advanced I/O such as events, interrupts and infrared
• Also available are the PCB boards associated with these kits, enabling the design of custom projects
• Download cables are not supplied but are also available, see 13-0847 or 13-6023