Search The Site...
|
|
|
|
The Circuits Shop
Your link to the world of Rapid Electronics!
|
|
Microcontrollers
The Circuits Shop Single Board Computers & Microcontrollers Genie Microcontrollers Microcontrollers
Bookmark or Share This Page
Genie 08 Microcontroller IC Version 2
|
|
|
This new version 2 GENIE 08 microcontroller has been designed as a direct replacement for the older version 1 GENIE C08 device. The version 2 MCU is faster and more powerful and can store larger flowchart or BASIC programs. GENIE is a low-cost microcontroller programming system designed exclusively for schools and colleges. The free, user-friendly flowchart software allows you to add intelligence and control to your new and existing design projects. No separate programmer is required and downloading is via a USB or serial cable.It is possible to run multiple programs at the same time on a single chip and also to run and test programs live on a connected GENIE chip. The chip is designed to work with either the Circuit Wizard 3 software or the GENIE flowchart programming software for Microsoft Windows and there are free online resources and community website at www.genieonline.com. - Developed by the authors of Livewire, PCB Wizard and Circuit Wizard
- Free, user-friendly GENIE flowchart programming software
- 32 MHz 'turbo' speed mode
- 1-Wire, I2C and servo support
- On-screen monitoring and calibration of digital and analogue signals
- Plug & play operation automatically detects a GENIE IC when it is connected
- Also available is a plug & play USB download cable, which eliminates COM port problems
Note: In order to program these version 2 GENIE microcontrollers, either Circuit Wizard 3 or the free GENIE Programming Editor software is required. |
|
Price |
|
Rapid Electronics Code |
£2.60 |
|
13-6040 |
|
|
More info / buy |
|
|
Genie 14 Microcontroller Version 2
|
|
|
This new version 2 GENIE 14 microcontroller has been designed as a direct replacement for the older version 1 GENIE C14 device. The version 2 MCU is faster and more powerful and can store larger flowchart or BASIC programs. GENIE is a low-cost microcontroller programming system designed exclusively for schools and colleges. The free, user-friendly flowchart software allows you to add intelligence and control to your new and existing design projects. No separate programmer is required and downloading is via a USB or serial cable.It is possible to run multiple programs at the same time on a single chip and also to run and test programs live on a connected GENIE chip. The chip is designed to work with either the Circuit Wizard 3 software or the GENIE flowchart programming software for Microsoft Windows and there are free online resources and community website at www.genieonline.com. - Developed by the authors of Livewire, PCB Wizard and Circuit Wizard
- Free, user-friendly GENIE flowchart programming software
- 32 MHz 'turbo' speed mode
- 1-Wire, I2C and servo support
- On-screen monitoring and calibration of digital and analogue signals
- Plug & play operation automatically detects a GENIE IC when it is connected
- Also available is a plug & play USB download cable, which eliminates COM port problems
Note: In order to program these version 2 GENIE microcontrollers, either Circuit Wizard 3 or the free GENIE Programming Editor software is required. |
|
Price |
|
Rapid Electronics Code |
£3.22 |
|
13-6041 |
|
|
More info / buy |
|
|
Genie 18 Microcontroller Version 2
|
|
|
This new version 2 GENIE 18 microcontroller has been designed as a direct replacement for the older version 1 GENIE E18 device. The version 2 MCU is faster and more powerful and can store larger flowchart or BASIC programs. GENIE is a low-cost microcontroller programming system designed exclusively for schools and colleges. The free, user-friendly flowchart software allows you to add intelligence and control to your new and existing design projects. No separate programmer is required and downloading is via a USB or serial cable.It is possible to run multiple programs at the same time on a single chip and also to run and test programs live on a connected GENIE chip. The chip is designed to work with either the Circuit Wizard 3 software or the GENIE flowchart programming software for Microsoft Windows and there are free online resources and community website at www.genieonline.com. - Developed by the authors of Livewire, PCB Wizard and Circuit Wizard
- Free, user-friendly GENIE flowchart programming software
- 32 MHz 'turbo' speed mode
- 1-Wire, I2C and servo support
- On-screen monitoring and calibration of digital and analogue signals
- Plug & play operation automatically detects a GENIE IC when it is connected
- Also available is a plug & play USB download cable, which eliminates COM port problems
Note: In order to program these version 2 GENIE microcontrollers, either Circuit Wizard 3 or the free GENIE Programming Editor software is required. |
|
Price |
|
Rapid Electronics Code |
£3.34 |
|
13-6042 |
|
|
More info / buy |
|
|
Genie 20 Microcontroller Version 2
|
|
|
This new version 2 GENIE 20 microcontroller has been designed as a direct replacement for the older version 1 GENIE C20 device. The version 2 MCU is faster and more powerful and can store larger flowchart or BASIC programs. GENIE is a low-cost microcontroller programming system designed exclusively for schools and colleges. The free, user-friendly flowchart software allows you to add intelligence and control to your new and existing design projects. No separate programmer is required and downloading is via a USB or serial cable.It is possible to run multiple programs at the same time on a single chip and also to run and test programs live on a connected GENIE chip. The chip is designed to work with either the Circuit Wizard 3 software or the GENIE flowchart programming software for Microsoft Windows and there are free online resources and community website at www.genieonline.com. - Developed by the authors of Livewire, PCB Wizard and Circuit Wizard
- Free, user-friendly GENIE flowchart programming software
- 32 MHz 'turbo' speed mode
- 1-Wire, I2C and servo support
- On-screen monitoring and calibration of digital and analogue signals
- Plug & play operation automatically detects a GENIE IC when it is connected
- Also available is a plug & play USB download cable, which eliminates COM port problems
Note: In order to program these version 2 GENIE microcontrollers, either Circuit Wizard 3 or the free GENIE Programming Editor software is required. |
|
Price |
|
Rapid Electronics Code |
£3.60 |
|
13-6043 |
|
|
More info / buy |
|
|
Genie Microcontroller C08 IC
|
|
|
This GENIE Microcontroller C08 IC is a low-cost microcontroller programming system designed exclusively for schools and colleges. The free, user-friendly flowchart software allows you to add intelligence and control to your new and existing design projects. No separate programmer is required and downloading is via a USB or serial cable. The heart of the microcontroller system is the microcontoller C08 IC, which has 8 pins. It is possible to run multiple programs at the same time on a single chip and also to run and test programs live on a connected GENIE chip. The chips are designed to work with the GENIE flowchart programming software for Microsoft Windows™ and there are free online resources and community website at www.genieonline.com. - Developed by the authors of Livewire, PCB Wizard and Circuit Wizard
- Free, user-friendly GENIE flowchart programming software
- More memory means more commands and better programs
- On-screen monitoring and calibration of digital and analogue signals
- Polyphonic (multi-channel) music support
- Plug & play operation automatically detects a GENIE IC when it is connected
- Supports advanced I/O such as events, interrupts and infrared
- Also available is a plug & play USB download cable, which eliminates COM port problems
This version has been superseded by a new generation of GENIE ICs, which benefit from lower prices. For details see 13-6040. |
|
Price |
|
Rapid Electronics Code |
£4.28 |
|
13-6001 |
|
|
More info / buy |
|
|
Genie Microcontroller C14 IC
|
|
|
Buy GENIE Microcontroller C08 IC - a low-cost microcontroller programming system designed exclusively for schools and colleges. The free, user-friendly flowchart software allows you to add intelligence and control to your new and existing design projects. No separate programmer is required and downloading is via a USB or serial cable. The heart of the microcontroller system is the microcontoller C14 IC, which has 14 pins. It is possible to run multiple programs at the same time on a single chip and also to run and test programs live on a connected GENIE chip. The chips are designed to work with the GENIE flowchart programming software for Microsoft Windows™ and there are free online resources and community website at www.genieonline.com. - Developed by the authors of Livewire, PCB Wizard and Circuit Wizard
- Free, user-friendly GENIE flowchart programming software
- More memory means more commands and better programs
- On-screen monitoring and calibration of digital and analogue signals
- Polyphonic (multi-channel) music support
- Plug & play operation automatically detects a GENIE IC when it is connected
- Supports advanced I/O such as events, interrupts and infrared
- Also available is a plug & play USB download cable, which eliminates COM port problems
This version has been superseded by a new generation of GENIE ICs, which benefit from lower prices. For details click here. |
|
Price |
|
Rapid Electronics Code |
£3.62 |
|
13-6002 |
|
|
More info / buy |
|
|
Genie Microcontroller E18 IC
|
|
|
Buy GENIE Microcontroller C08 IC - a low-cost microcontroller programming system designed exclusively for schools and colleges. The free, user-friendly flowchart software allows you to add intelligence and control to your new and existing design projects. No separate programmer is required and downloading is via a USB or serial cable. The heart of the GENIE microcontroller system is the microcontroller E18 IC, which has 18 pins. It is possible to run multiple programs at the same time on a single chip and also to run and test programs live on a connected GENIE chip. The chips are designed to work with the GENIE flowchart programming software for Microsoft Windows™ and there are free online resources and community website at www.genieonline.com. - Developed by the authors of Livewire, PCB Wizard and Circuit Wizard
- Free, user-friendly GENIE flowchart programming software
- More memory means more commands and better programs
- On-screen monitoring and calibration of digital and analogue signals
- Polyphonic (multi-channel) music support
- Plug & play operation automatically detects a GENIE IC when it is connected
- Supports advanced I/O such as events, interrupts and infrared
- Also available is a plug & play USB download cable, which eliminates COM port problems
This version has been superseded by a new generation of GENIE ICs, which benefit from lower prices. For details see 13-6042. |
|
Price |
|
Rapid Electronics Code |
£3.60 |
|
13-6004 |
|
|
More info / buy |
|
|
Genie Microcontroller E28 IC
|
|
|
The heart of the microcontroller system is the microcontoller E28 IC, which has 28 pins. It is possible to run multiple programs at the same time on a single chip and also to run and test programs live on a connected GENIE chip. The chips are designed to work with the GENIE flowchart programming software for Microsoft Windows™ and there are free online resources and community website at www.genieonline.com. - Developed by the authors of Livewire, PCB Wizard and Circuit Wizard
- Free, user-friendly GENIE flowchart programming software
- More memory means more commands and better programs
- On-screen monitoring and calibration of digital and analogue signals
- Polyphonic (multi-channel) music support
- Plug & play operation automatically detects a GENIE IC when it is connected
- Supports advanced I/O such as events, interrupts and infrared
- Also available is a plug & play USB download cable, which eliminates COM port problems
|
|
Price |
|
Rapid Electronics Code |
£6.74 |
|
13-6005 |
|
|
More info / buy |
|
|
Page:
1
| |
|
|
|
|
|