The PICAXE 08M2+ is part of a microcontroller system that uses low cost FLASH memory based microcontrollers with a unique, pre-programmed PICAXE bootstrap code. This gives a device that may be reprogrammed typically 100,000 times without the need for an expensive and complicated programmer.

PICAXE is programmed using a simple BASIC language or via the Logicator flowcharting software. Windows, Mac and Linux are all supported by the free BASIC software which can be downloaded from www.picaxe.co.uk.

Programming is carried out via a simple USB (13-0849) or serial (13-0847) cable. In addition to the microcontroller chips, starter, tutorial, and upgrade kits are available to provide a complete PICAXE solution.

• Suitable for education, industry and hobbyists
• Low cost and simple to use
• Can be programmed using an intuitive graphical flowchart
• Free, easy to use Programming Editor software
• Supply voltage 2.2V to 5.5V
• Flash memory 128bytes
• 5 I/O pins, 3 ADC channels
• Clock speed 8MHz
• 8-DIP case

To use 08M2+ parts you must upgrade your software to these or later versions: Programming Editor 5.4.3; Logicator 3.6.0; AXEpad 1.4.0. All updates are free to download from www.picaxe.com/software.

The PICAXE-08M2 is an 8-pin FLASH microcontroller chip that has a unique, pre-programmed PICAXE bootstrap code. This gives a device that may be reprogrammed typically 100,000 times without the need for an expensive and complicated programmer. PICAXE is programmed using a simple BASIC language or via the intuitive Logicator flowcharting software that especially enables younger students and hobbyists to start generating programs quickly and easily. Windows, Mac and Linux are all supported by the free BASIC software which can be downloaded from www.picaxe.co.uk. Programming is carried out via a simple USB (13-0849) or serial (13-0847) cable. In addition to the microcontroller chips, starter, tutorial, and upgrade kits are available to provide a complete PICAXE solution.

• SO-8 Package
• Pins are individually configurable for greater I/O flexibility
• Suitable for education, industry and hobbyists
• Low cost and simple to use
• Wide range of variants
• Can be programmed using an intuitive graphical flowchart
• Free, easy to use Programming Editor software

PICAXE is a microcontroller system that uses low cost FLASH memory based microcontrollers with a unique, pre-programmed PICAXE bootstrap code. This gives a device that may be reprogrammed typically 100,000 times without the need for an expensive and complicated programmer.PICAXE is programmed using a simple BASIC language or by using an intuitive graphical flowchart system, enabling younger students and hobbyists to start generating programs quickly and easily.Programming is carried out via a simple serial or USB cable which means that a simple project kit is easily assembled. In addition to the microcontroller chips, starter, tutorial, and upgrade kits are available to provide a complete PICAXE solution.This PICAXE X2 microcontroller chip comes in a 28-pin package. Every pin is individually configurable for greater I/O flexibility. These latest designs of the PICAXE chip feature increased memory, scratchpad and RAM, plus additional features such as the ability to boot or run programs from I2C memory, additional timers, a SRLatch and additional interrupts.

• Suitable for education, industry and hobbyists
• Low cost and simple to use
• Can be programmed using an intuitive graphical flowchart
• Easy to use Program Editor software
• 28- and 40-Pin versions are available also in surface mount types

Buy PICAXE 20M2 - a microcontroller system that uses low cost FLASH memory based microcontrollers with a unique, pre-programmed PICAXE Bootstrap code. This gives a device that may be reprogrammed typically 100, 000 times without the need for an expensive and complicated programmer. PICAXE Is programmed using a simple BASIC language or via the Logicator Flowcharting software. Windows, Mac and Linux are all supported by the free BASIC software which can be downloaded from www.PICAXE.co.uk. programming is carried out via a simple USB (13-0849) Or serial (13-0847) Cable. In addition to the microcontroller chips, starter, tutorial, and upgrade kits are available to provide a complete PICAXE Solution.

• Suitable for education, industry and hobbyists
• Low cost and simple to use
• Can be programmed using an intuitive graphical flowchart
• Free, easy to use Programming Editor software

The PICAXE-20M2 is a 20-pin FLASH microcontroller chip that has a unique, pre-programmed PICAXE bootstrap code. This gives a device that may be reprogrammed typically 100,000 times without the need for an expensive and complicated programmer. PICAXE is programmed using a simple BASIC language or via the intuitive Logicator flowcharting software that especially enables younger students and hobbyists to start generating programs quickly and easily. Windows, Mac and Linux are all supported by the free BASIC software which can be downloaded from www.picaxe.co.uk. Programming is carried out via a simple USB (13-0849) or serial (13-0847) cable. In addition to the microcontroller chips, starter, tutorial, and upgrade kits are available to provide a complete PICAXE solution.

• SO-20 Package
• Pins are individually configurable for greater I/O flexibility
• Suitable for education, industry and hobbyists
• Low cost and simple to use
• Wide range of variants
• Can be programmed using an intuitive graphical flowchart
• Free, easy to use Programming Editor software

PICAXE is a microcontroller system that uses low cost FLASH memory based microcontrollers with a unique, pre-programmed PICAXE bootstrap code. This gives a device that may be reprogrammed typically 100,000 times without the need for an expensive and complicated programmer.PICAXE is programmed using a simple BASIC language or by using an intuitive graphical flowchart system, enabling younger students and hobbyists to start generating programs quickly and easily.Programming is carried out via a simple serial or USB cable which means that a simple project kit is easily assembled. In addition to the microcontroller chips, starter, tutorial, and upgrade kits are available to provide a complete PICAXE solution.This PICAXE X2 microcontroller chip comes in a 20-pin package. Every pin is individually configurable for greater I/O flexibility. These latest designs of the PICAXE chip feature increased memory, scratchpad and RAM, plus additional features such as the ability to boot or run programs from I2C memory, additional timers, a SRLatch and additional interrupts.

• Suitable for education, industry and hobbyists
• Low cost and simple to use
• Can be programmed using an intuitive graphical flowchart
• Easy to use Program Editor software
• 28- and 40-Pin versions are available also in surface mount types

PICAXE is a microcontroller system that uses low cost FLASH memory based microcontrollers with a unique, pre-programmed PICAXE bootstrap code. This gives a device that may be reprogrammed typically 100,000 times without the need for an expensive and complicated programmer.PICAXE is programmed using a simple BASIC language or by using an intuitive graphical flowchart system, enabling younger students and hobbyists to start generating programs quickly and easily.Programming is carried out via a simple serial or USB cable which means that a simple project kit is easily assembled. In addition to the microcontroller chips, starter, tutorial, and upgrade kits are available to provide a complete PICAXE solution.This PICAXE X2 microcontroller chip comes in a 40-pin package. Every pin is individually configurable for greater I/O flexibility. These latest designs of the PICAXE chip feature increased memory, scratchpad and RAM, plus additional features such as the ability to boot or run programs from I2C memory, additional timers, a SRLatch and additional interrupts.

• Suitable for education, industry and hobbyists
• Low cost and simple to use
• Can be programmed using an intuitive graphical flowchart
• Easy to use Program Editor software
• 28- and 40-Pin versions are available also in surface mount types

The PICAXE 18M2+ is a microcontroller system that uses low cost FLASH memory based microcontrollers with a unique, pre-programmed PICAXE bootstrap code. This gives a device that may be reprogrammed typically 100,000 times without the need for an expensive and complicated programmer.

PICAXE is programmed using a simple BASIC language or via the Logicator flowcharting software. Windows, Mac and Linux are all supported by the free BASIC software which can be downloaded from www.picaxe.co.uk.

Programming is carried out via a simple USB (13-0849) or serial (13-0847) cable. In addition to the microcontroller chips, starter, tutorial, and upgrade kits are available to provide a complete PICAXE solution.

• Suitable for education, industry and hobbyists
• Low cost and simple to use
• Can be programmed using an intuitive graphical flowchart
• Free, easy to use Programming Editor software

The PICAXE-18M2 is an 18-pin FLASH microcontroller chip that has a unique, pre-programmed PICAXE bootstrap code. This gives a device that may be reprogrammed typically 100,000 times without the need for an expensive and complicated programmer. PICAXE is programmed using a simple BASIC language or via the intuitive Logicator flowcharting software that especially enables younger students and hobbyists to start generating programs quickly and easily. Windows, Mac and Linux are all supported by the free BASIC software which can be downloaded from www.picaxe.co.uk. Programming is carried out via a simple USB (13-0849) or serial (13-0847) cable. In addition to the microcontroller chips, starter, tutorial, and upgrade kits are available to provide a complete PICAXE solution.

• SO-18 Package
• Pins are individually configurable for greater I/O flexibility
• Suitable for education, industry and hobbyists
• Low cost and simple to use
• Wide range of variants
• Can be programmed using an intuitive graphical flowchart
• Free, easy to use Programming Editor software

A compact but powerful, PICAXE microcontroller. Popular in education due to its low cost and small size, but also very popular in a wide range of hobbyist projects. This chip supports up to 12 inputs/outputs with 7 analogue/touch sensor channels. All M2 series parts support enhanced features such as configurable i/o pins, parallel tasks, ring tone music and touch sensor inputs.

• 3V to 5.5V supply voltage
• 256Bytes Flash memory
• 11 I/O Pins
• 7 ADC Channels
• DIL-14 Case
• 8/10-bit ADC

PICAXE chip, PICAXE family, 4V to 5.5V supply voltage, 128Bytes flash memory, 22 I/O pins, 4 ADC channels, 2 PWM channels, 16MHz clock speed, I2C interfaces, 28-DIP case, advanced level PICAXE chip, program memory 600 line, separate data memory, interrupts, infra-red receive, support SOR digital temperature sensor, control of radio-control servos, keyboard input, I2C interface for linking to external EEPROMs and other devices, 8/10-Bit ADC, 12-Bit temperature read, PWM motor control, input pulse counting, serial output via programming cable, higher baud rate for serial work.