The LoRa Discovery kit is an excellent development tool for learning and for developing solutions based on LoRa and FSK/OOK technologies. The kit features the CMWX1ZZABZ-091 all-in-one open module, powered by the STM32L072CZ ARM Cortex M0 microcontroller and an SX1276 transceiver. The transceiver features the LoRa long-range modem that gives ultra-long-range spread spectrum communications, plus high interference immunity, minimising current consumption. The open module gives access to all the microcontroller peripherals such as ADC, 16-bit timer, LP-UART, I2C, SPI and USB 2.0 FS. Also included in the kit is the ST-LINK/V2-1 embedded debug tool interface, LEDs, push-buttons, antenna, Arduino™Uno V3 connectors and USB OTG connector in Micro-B format.

• ARM Cortex MCU
• On-board ST-LINK/V2-1
• ADC and DAC
• USB, UART, I2C, and SPI
• Demonstration software pre-loaded
• LoRa , FSK, GFSK, MSK, GMSK and OOK
• LoRaWANstack is certified class A and C compliant
• Selectable output power
• High sensitivity
• High dynamic range
• 50Ω SMA RF antenna

For further details, plus resources, tools and software, please see the product page.

From the STM32F1 series, this STM Nucleo development board targets the STM32F103RB microcontroller and is a highly affordable and flexible Arduino compatible development board that allows you to try out new ideas, create prototypes and refine designs. The board gives a combination of performance, power consumption and features that will suit your development requirements. The board features Arduino Uno V3 connectivity support, and ST morpho headers extend the functionality of the Nucleo open development platform via a wide choice of specialised shields. The inclusion of the ST-LINK/V2-1 debugger and programmer means that the board does not require external probing. To aid you in getting started there is a comprehensive software HAL library, together with various packaged software examples, as well as direct access to the ARM mbed online at http://mbed.org.

• Features an STM32F103RB MCU
• 128Kbytes Flash memory
• Arduino Uno V3 and ST morpho connectivity
• ARM mbed
• Onboard debugger/programmer
• Power via USB, VBUS or external supply
• LED Status indication
• User and reset pushbuttons
• USB re-enumeration capability
• Support for a wide choice of IDEs

From the STM32F3 series, this STM Nucleo development board features the STM32F303K8T6 microcontroller and is a highly affordable and flexible Arduino compatible development board that allows you to try out new ideas, create prototypes and refine designs. The board gives a combination of performance, power consumption and features that will suit your development requirements. The board features Arduino Uno V3 connectivity support, and ST morpho headers extend the functionality of the Nucleo open development platform via a wide choice of specialised shields. The inclusion of the ST-LINK/V2-1 debugger and programmer means that the board does not require external probing. To aid you in getting started there is a comprehensive software HAL library, together with various packaged software examples, as well as direct access to the ARM mbed online at http://mbed.org.

• Features an STM32F303K8T6 MCU
• 64Kbytes Flash memory
• Arduino Uno V3 and ST morpho connectivity
• ARM mbed
• Onboard debugger/programmer
• Power via USB, VBUS or external supply
• LED Status indication
• User and reset pushbuttons
• USB re-enumeration capability
• Support for a wide choice of IDEs

From the STM32F4 series, this STM Nucleo development board targets the STM32F401RE microcontroller and is a highly affordable and flexible Arduino compatible development board that allows you to try out new ideas, create prototypes and refine designs. The board gives a combination of performance, power consumption and features that will suit your development requirements. The board features Arduino Uno V3 connectivity support, and ST morpho headers extend the functionality of the Nucleo open development platform via a wide choice of specialised shields. The inclusion of the ST-LINK/V2-1 debugger and programmer means that the board does not require external probing. To aid you in getting started there is a comprehensive software HAL library, together with various packaged software examples, as well as direct access to the ARM mbed online at http://mbed.org.

• Features an STM32F401RE MCU
• 512Kbytes Flash memory
• Arduino Uno V3 and ST morpho connectivity
• ARM mbed
• Onboard debugger/programmer
• Power via USB, VBUS or external supply
• LED Status indication
• User and reset pushbuttons
• USB re-enumeration capability
• Support for a wide choice of IDEs

From the STM32F4 series, this STM Nucleo development board targets the STM32F411RE microcontroller and is a highly affordable and flexible Arduino compatible development board that allows you to try out new ideas, create prototypes and refine designs. The board gives a combination of performance, power consumption and features that will suit your development requirements. The board features Arduino Uno V3 connectivity support, and ST morpho headers extend the functionality of the Nucleo open development platform via a wide choice of specialised shields. The inclusion of the ST-LINK/V2-1 debugger and programmer means that the board does not require external probing. To aid you in getting started there is a comprehensive software HAL library, together with various packaged software examples, as well as direct access to the ARM mbed online at http://mbed.org.

• Features an STM32F411RE MCU
• 512Kbytes Flash memory
• Arduino Uno V3 and ST morpho connectivity
• ARM mbed
• Onboard debugger/programmer
• Power via USB, VBUS or external supply
• LED Status indication
• User and reset pushbuttons
• USB re-enumeration capability
• Support for a wide choice of IDEs

From the STM32F4 series, this STM Nucleo development board targets the STM32F446RE microcontroller and is a highly affordable and flexible Arduino compatible development board that allows you to try out new ideas, create prototypes and refine designs. The board gives a combination of performance, power consumption and features that will suit your development requirements. The board features Arduino Uno V3 connectivity support, and ST morpho headers extend the functionality of the Nucleo open development platform via a wide choice of specialised shields. The inclusion of the ST-LINK/V2-1 debugger and programmer means that the board does not require external probing. To aid you in getting started there is a comprehensive software HAL library, together with various packaged software examples, as well as direct access to the ARM mbed online at http://mbed.org.

• Features an STM32F446RE MCU
• 512Kbytes Flash memory
• Arduino Uno V3 and ST morpho connectivity
• ARM mbed
• Onboard debugger/programmer
• Power via USB, VBUS or external supply
• LED Status indication
• User and reset pushbuttons
• USB re-enumeration capability
• Support for a wide choice of IDEs

From the STM32F7 series, this STM Nucleo development board features the STM32F746ZGT6 microcontroller and is a highly affordable and flexible Arduino compatible development board that allows you to try out new ideas, create prototypes and refine designs. The board gives a combination of performance, power consumption and features that will suit your development requirements. The board features an ST Zio connector, which is an extension of Arduino Uno V3, providing more access to peripherals while ST morpho headers extend the functionality of the Nucleo open development platform via a wide choice of specialised shields. The inclusion of the ST-LINK/V2-1 debugger and programmer means that the board does not require external probing. To aid you in getting started there is a comprehensive software HAL library, together with various packaged software examples, as well as direct access to the ARM mbed online at http://mbed.org.

• Features an STM32F746ZGT6 MCU
• 1Mbyte Flash memory
• Arduino Uno V3 and ST morpho connectivity
• ARM mbed
• Onboard debugger/programmer
• 32.768kHz LSE crystal
• Ethernet connector
• Power via VBUS or external supply
• Three user LEDs
• User and reset pushbuttons
• USB re-enumeration capability
• Support for a wide choice of IDEs

The STM32F407G Discovery kit leverages the capabilities of the STM32F407 32-bit ARM Cortex-M44 series of high performance microcontrollers, to allow users to easily develop applications featuring audio. The discovery kit is based around the STM32F407G microcontroller which has 1-MByte Flash memory and 192K-Byte of RAM. The kit includes a MEMS digital accelerometer, digital microphone, and an audio DAC with integrated Class D driver.

• Perfect for developing audio applications
• On-board ST-LINK/V2-1
• Mbed-enabled
• Embedded debug tool
• Powered via USB or external 5V
• External application 3 and 5V supply
• 3-Axis accelerometer
• Status LEDs
• User and reset buttons
• Three different USB interfaces
• Extension header for I/O
• Comprehensive free software

The STM32F429I Discovery kit is part of the range of STM32 microcontroller discovery boards that provide a comprehensive and cost effective solution for the evaluation of the outstanding abilities of the STM32F429ZIT6 MCU. The board leverages the capabilities of the STM32F429 high-performance microcontroller, to allow users to easily develop rich applications with advanced Graphic User interfaces. The STM32F769I microcontroller features 2Mbytes of Flash memory and 256Kbytes of RAM. Additional features include a 2.4in QVGA TFT LCD, 64Mbit SDRAM, 3-axis MEMS motion sensor digital output gyroscope, 6x LEDs for function and operation indication, user and reset pushbuttons, extension header for quick connection and easy probing, and a wide range of input and output connectors.

• Ideal for prototyping
• Extension connectors give access device I/O
• Power supply via USB or external 3 or 5V supply
• On-board ST-LINK/V2-1
• Mbed-enabled
• Comprehensive free software

The STM32F746G Discovery kit is part of the range of STM32 microcontroller discovery boards that provide a comprehensive and cost effective solution for the evaluation of the outstanding abilities of the STM32F746NGH6 MCU. The board has the necessary architecture to allow users to develop and share applications with STM32F7 Series microcontrollers based on the ARM Cortex-M7 core. A HAL library and comprehensive software examples further enhance the evaluation and development experience. The discovery kit enables a wide diversity of applications, benefiting from audio, multi-sensor support, graphics, security, video and high-speed connectivity features. The Arduino connectivity support provides unlimited expansion capabilities with a large choice of specialized add-on boards. The STM32F746NGH6 microcontroller features 1Mbyte of Flash memory and 340 Kbytes of RAM. Additional features include a 4.3in 480 x 272 colour LCD-TFT with a capacitive touch screen, 2x ST MEMS microphones, user and reset pushbuttons, and a wide range of input and output connectors.

• Ideal for prototyping
• Extension connectors give access device I/O
• Integrated debugger/programmer
• On-board ST-LINK/V2-1
• Mbed-enabled
• SAI audio codec
• Audio line in and line out jack
• Stereo speaker outputs
• Five power supply options
• Voltage output for external applications 3.3 or 5V
• Arduino Uno V3 connectors
• Comprehensive free software
• Supported by a wide choice of IDEs