The Cyntech Raspberry Pi model B+, Pi 2 and Pi 3 case in black has a wear resistant matt finish while the centre top is highly polished. The case includes a set of light pipes which transfer the light from the Pi's activity LEDS to the outside of the case so that you always know what the Pi is doing.

• Compatible with the Raspberry Pi 3 model
• Raspberry Pi B+ clip fit with optional screw locking (screws included)
• Positive and secure case locking via screws (screws included)
• Colour black
• GPIO 40-pin ribbon cable slot
• CSI camera cable slot
• DSI LCD video cable slot
• Strong and durable ABS plastic
• 50mm VESA mount and wall mount features

This attractive Ninja Case is crafted out of five unique layers, including a transparent top and base that leave your beautiful Raspberry Pi 4 visible inside.

Each layer is laser-cut from colourful, high-quality, cast acrylic and once stacked they securely contain your Raspberry Pi 4 while leaving the primary ports, including the camera port, display port and GPIO accessible.

Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly.

• Ninja case
• Protects your beloved Pi
• Clear top and base leave Raspberry Pi 4 visible
• Cutout in lid for 40 x 30mm heatsink or Fan SHIM
• Leaves all ports accessible
• GPIO cut-out
• Handy laser-etched port labels
• Super-slimline profile
• Fully HAT-compatible
• Works great with standoffs
• Made from lightweight, high-quality, cast acrylic
• Great for hacking and tinkering
• Dimensions: 99 x 66 x 15mm (W x L x H) excluding bolt heads and nuts
• Made in Sheffield, UK

Note: Compatible with Raspberry Pi 4 only. Raspberry Pi 4 not included.

This attractive Rainbow Case is crafted out of five unique layers, including a transparent top that leaves your beautiful Raspberry Pi 4 visible inside.

Each layer is laser-cut from colourful, high-quality, cast acrylic and once stacked they securely contain your Raspberry Pi 4 while leaving the primary ports, including the camera port, display port and GPIO accessible.

Weighing just over 50 grams, the case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly.

• Rainbow case
• Protects your beloved Pi
• Clear top leaves Raspberry Pi 4 visible
• Cutout in lid for 40 x 30mm heatsink or Fan SHIM
• Leaves all ports accessible
• GPIO cut-out
• Handy laser-etched port labels
• Super-slimline profile
• Fully HAT-compatible
• Works great with standoffs
• Made from lightweight, high-quality, cast acrylic
• Great for hacking and tinkering
• Dimensions: 99 x 66 x 15mm (W x L x H) excluding bolt heads and nuts
• Made in Sheffield, UK
• The ideal Christmas maker gift!

Note: Compatible with Raspberry Pi 4 only. Raspberry Pi 4 not included.

If you have a Raspberry Pi Zero W, you'll want it looking after - so use the stylish Pibow Zero W case. The case is laser cut from the best lightweight, high-quality cast Sheffield acrylic, and consists of four layers - including a transparent top and base so you can still see your Pi inside, and a design that leaves the primary ports and GPIO accessible. No tools are required for assembly or disassembly so check out the tutorial for details on how to get the Pi in the case.

• Raspberry Pi not included
• Beautiful berry colours - red, purple, and blue
• Super-slimline profile
• Fully HAT/pHAT compatible
• Great for hacking and tinkering!
• Ideal for mounting to any surface

Note that this is the case for the Raspberry Pi Zero W only. This case is not compatible with the Pi Zero v1.2/1.3, or any other models of Raspberry Pi. For other cases please see our website.

This new, redesigned Pibow Coupé Ninja case is as hard as Sheffield steel (which is where it comes from). The case is laser-cut from five unique layers of colourful, high-quality, cast acrylic, and when the layers are stacked they produce a case that will securely protect your Pi, whilst still giving great access to primary ports, including camera and display ports and GPIO. The case is compatible with the Raspberry Pi B+, 3 and 2 (due to changes in the layout of the Raspberry Pi 3 B+, older Pibows (ones with a 3/2/B+ label) will not work with Raspberry Pi 3 B+). The case is lightweight and can be mounted to any surface. You don't even need any special tools to assemble or disassemble it. The transparent top and base leave your beautiful Pi visible inside, and it really is the best, most effective and stylish way to extend the life of Pi.

• Compatible with Raspberry Pi 3 B+, 3, and 2
• Protects your beloved Pi
• Great for hacking and tinkering
• Super-slimline profile
• Extra venting, and a space for a heatsink
• Fully HAT-compatible
• Works great with standoffs
• Add-on friendly
• GPIO cut-out with laser-etched pin labels
• Leaves all ports accessible
• Made from lightweight, high-quality, cast acrylic
• Dimensions 99 x 66 x 15mm

This official case for the Raspberry Pi 4 is designed to keep your Pi safe and secure.

It offers high quality ABS construction and cut-outs for all of the connection ports.

• Two-part design simply clips together
• Lid can be removed if using a HAT
• Cut-outs for all connections and MicroSD port
• Power/activity LEDs still visible
• Includes anti-slip feet to keep the case stable
• External dimensions (W x D x H): 96 x 70 x 30mm
• Colour: black / grey

This official case for the Raspberry Pi 4 is designed to keep your Pi safe and secure.

It offers high quality ABS construction and cut-outs for all of the connection ports.

• Two-part design simply clips together
• Lid can be removed if using a HAT
• Cut-outs for all connections and MicroSD port
• Power/activity LEDs still visible
• Includes anti-slip feet to keep the case stable
• External dimensions (W x D x H): 96 x 70 x 30mm
• Colour: red / white

Raspberry Pi case for Raspberry Pi Zero 2 W, supplied with 3 separate lids (plain, GPIO, Camera).

Also supplied is a short camera cable for use with the Raspberry Pi Camera and Camera NOIR.

For the best way to keep your Raspberry Pi 3 A+ safe and protected you need the Official Raspberry Pi 3 Model A+ case. This extraordinarily handsome red and white case has an easy snap-fit assembly design and features removable side panels and lid to give easy access to GPIO, camera, and display connectors. Not only will this case protect your Raspberry Pi 3 A+ from damage, it also looks good and will enhance any project - whether it be a demonstration or presentation, or where the finishing touch is needed on an innovative installation.

• For use with the Raspberry Pi 3 A+
• Cut-outs for all connection points and microSD card port
• Light pipes for power and activity LEDs
• High-quality ABS construction
• Stick on rubber feet for case stability

The official Raspberry Pi 5 case is a refinement of the Raspberry Pi 4 case, with a number of improvements and thermal features to accommodate the footprint and peak power consumption of Raspberry Pi 5.

Following the same easy-to-assemble snap-together design, the case now includes an internal PWM fan for use with the dedicated fan connector on the Raspberry Pi 5. Heatsinks are included. Vents in the base, as well as a slim gap below the lid, also ensure airflow is unrestricted. This combination of active and passive thermal measures ensures your board stays cool even with the most demanding projects.

Pop the lid off and you'll find the removable clear fan insert, which includes cut-outs to access your GPIO pins as well as corner slots to attach standoffs. With the clear insert removed, you can fit HATs perfectly into the gap, allowing you to expand the use of your Raspberry Pi 5 without removing the protection that the case offers.

The new power button on the Raspberry Pi 5 is accessible with a clever clear 2-in-1 button and activity LED button. An access section has been added for swapping out your Micro-SD card, whilst soft feet ensure your projects stay put on your desk whilst avoiding damage to the surface. Stacking cases is an option with the addition of your own standoffs/screws.

• Compatible with Raspberry Pi 5
• Snap-together design - no tools required
• Offers access to all major ports and GPIO pins
• Power button access with activity LED visibility
• Included PWM fan with Pi 5 fan connector
• Ventilated for optimal airflow
• Heatsinks included
• HAT insert (holds fan) with embossed Raspberry Pi logo
• Stackable with standoffs
• Soft feet

The official Raspberry Pi 5 case is a refinement of the Raspberry Pi 4 case, with a number of improvements and thermal features to accommodate the footprint and peak power consumption of Raspberry Pi 5.

Following the same easy-to-assemble snap-together design, the case now includes an internal PWM fan for use with the dedicated fan connector on the Raspberry Pi 5. Heatsinks are included. Vents in the base, as well as a slim gap below the lid, also ensure airflow is unrestricted. This combination of active and passive thermal measures ensures your board stays cool even with the most demanding projects.

Pop the lid off and you'll find the removable clear fan insert, which includes cut-outs to access your GPIO pins as well as corner slots to attach standoffs. With the clear insert removed, you can fit HATs perfectly into the gap, allowing you to expand the use of your Raspberry Pi 5 without removing the protection that the case offers.

The new power button on the Raspberry Pi 5 is accessible with a clever clear 2-in-1 button and activity LED button. An access section has been added for swapping out your Micro-SD card, whilst soft feet ensure your projects stay put on your desk whilst avoiding damage to the surface. Stacking cases is an option with the addition of your own standoffs/screws.

• Compatible with Raspberry Pi 5
• Snap-together design - no tools required
• Offers access to all major ports and GPIO pins
• Power button access with activity LED visibility
• Included PWM fan with Pi 5 fan connector
• Ventilated for optimal airflow
• Heatsinks included
• HAT insert (holds fan) with embossed Raspberry Pi logo
• Stackable with standoffs
• Soft feet