The Labfacility L60+ Thermocouple Welder is a compact, simple-to-use instrument for welding thermocouples and other fine wires.

The L60+ is primarily designed for producing commercial-grade thermocouple junctions and is ideal for economic production of large numbers of exposed-junction thermocouples for test and development laboratories. It is also ideally suited to attaching transducer and RTD extension leads.

The Thermocouple Welder does not need specialised skills and most people are capable of producing quality work with only a little practice. The instrument is supplied with a full range of accessories including a footswitch, which leaves the hands free for accurately manipulating wires. The L60+ is suitable for use with wires of up to 1.1mm diameter and the energy output can be varied up to 60 Joules. Completely satisfactory thermocouple junctions can be produced without the need for argon, but an argon gas shield facility is included for use where Argon is readily available.

• Simple to use Thermocouple Welder
• Designed for the production of commercial grade thermocouple junctions
• Also suitable for other fine wire work
• Front panel or footswitch operation
• Argon gas shield facility
• Spare carbon electrodes available separately
• Labfacility type L60+, XE-6101-001

• Supplied complete with the following accessories:
• Wire holding pliers and lead
• Safety glasses
• Magnifying eyeglass
• Carbon electrodes
• Spare 2A fuse
• Argon hose
• Mains lead
• Footswitch for greater ease of use

Spare or replacement carbon electrodes for use with the Labfacility L60+ Thermocouple Welder, 90-2744.

• Supplied in packs of 5

This Labfacility 767 Series Panel Mounting DIN-Sized Selector Switch permits convenient, reliable selection of up to 12 Type K thermocouples.

The desired thermocouple can be easily selected by means of a front panel mounted rotary switch which also provides clear indictaion of the channel selected. Inputs are via rear-panel mounted terminals, with output via a 1 metre lead for connection to a panel meter, etc.

• Wired in appropraite extension wire for best possible accuracy
• Input connections via barrier terminal strips
• Output connection via 1m of appropriate cable
• Input selection via multipole rotary switch
• Dimensions: DIN size bezel 48mm high x 96mm wide
• Panel cutout: 45mm high x 92 mm wide
• Labfacility 767 Series, Type XE-6310-001