A Nylon 6.6 wire saddle.

• Useable area of 3 x 6.6mm
• Saddle snap locks into a 3.5mm diameter hole
• Overall height above the hole is 7.4mm
• UL approved
• Essentra part number MWSEA2-1-01
• Supplied in packs of 50

A low profile side entry micro wire saddle.

• A useable wire bundle area of 2.8 x 8.4mm that will not exceed the height of a standard IC
• The adhesive backed base measures 12.7 x 9.5mm
• Will ensure a secure fixing with equipment cabinets, enclosures etc.
• Maximum height 6.4mm
• Made from natural coloured Nylon 6.6
• UL approved
• Essentra number MWSSEB-1-01A-RT
• Supplied in packs of 50

The Essentra TFCCA-40-01 is an adhesive cable tie for holding flat ribbon cables.

• Affixing Method: Self adhesive
• Cable Clip/Clamp Style: Cable Clip
• Colour: Natural
• Depth: 15.7mm
• Length: 67.1mm
• Width: 15.7mm
• Material: Nylon 6.6
• Supplied singly
• Manufacturer's part: TFCCA-40-01

The HellermannTyton 201-10020 C2 is a Clip Base, one part of a pair required to make a Cradle Clip. The Cradle Clip is a simple and versatile method of bundling cables. The mounting cradle clip consists of two parts, the 'clip base' for mounting onto a panel, and the 'elasticated loop' (retaining ring). The elasticated loop is simply stretched over the clip offering a simple and quick method of containing cables.

The cradle clips are suitable for pre-assembly, prototyping or applications requiring the addition or removal of cables.

Please Note: A clip base (C) and a elasticated loop (R) must both be purchased to make one cable clip.

• Bundle diameter: 11mm
• Material: Material {polyamide} 6.6 (PA66)
• Product Specifications: Bore hole diameter 4.8mm
• Flame retardant in accordance with UL94 V2
• Temperature range: -40ºC to 85ºC, temporarily up to +105ºC (500 hrs)
• Dimensions: 35(L1) x 15.5(B1) x 12.7(B2) x 18(H) x 11(R)mm
• Supplied in black
• Type: C2
• Manufacturer's part: HellermannTyton 201-10020

The HellermannTyton 201-20020 R2 is an Elasticated Loop (retaining ring), one part of a pair required to make a Cradle Clip. The Cradle Clip is a simple and versatile method of bundling cables. The mounting cradle clip consists of two parts, the 'Clip Base' for mounting onto a panel, and the 'Elasticated Loop' (retaining ring). The elasticated loop is simply stretched over the clip offering a simple and quick method of containing cables.

The cradle clips are suitable for pre-assembly, prototyping or applications requiring the addition or removal of cables.

Please Note: A clip base (C) and a elasticated loop (R) must both be purchased to make one cable clip.

• Material: Clip PVC
• Product Specifications: Bore hole diameter 4.8mm
• Flame retardant in accordance with UL94 V2
• Temperature range: -40ºC to 85ºC, temporarily up to +105ºC (500 hrs)
• Dimensions: 22(L1) x 29(L2) x 23.8(B1) x 3.2(H)mm
• Supplied in black
• Type: R2
• Manufacturer's part: HellermannTyton 201-20020

The HellermannTyton 201-20030 R3 is an Elasticated Loop (retaining ring), one part of a pair required to make a Cradle Clip. The Cradle Clip is a simple and versatile method of bundling cables. The mounting cradle clip consists of two parts, the 'Clip Base' for mounting onto a panel, and the 'Elasticated Loop' (retaining ring). The elasticated loop is simply stretched over the clip offering a simple and quick method of containing cables.

The cradle clips are suitable for pre-assembly, prototyping or applications requiring the addition or removal of cables.

Please Note: A clip base (C) and a elasticated loop (R) must both be purchased to make one cable clip.

• Material: Clamping loop PVC
• Product Specifications: Bore hole diameter 4.8mm
• Flame retardant in accordance with UL94 V2
• Dimensions: 33(L1) x 39(L2) x 23.8(B1) x 3.2(H)mm
• Supplied in black
• Type: R3
• Manufacturer's part: HellermannTyton 201-20030

The HellermannTyton 211-15050 ALU5C is an Aluminium Mounting P-Clip that offers a simple way to secure cabling. This clip can hold a 4.8mm cable bundle, and is from the ALU-P-Clip range, is supplied with the Chloroprene insert. It can be used to secure parts subject to vibration (for example to retain capacitors on a PCB).

Manufactured from high quality aluminium, this P-Clip provides flexibility and yet give a permanent fixing in the most arduous environments. The addition of a Chloroprene insert, provides the cable or pipe bundle with a high degree of protection against vibration, reduces noise and also offers electrical isolation.

• Simple, secure pipe or cable fixing (e. g. caravan construction)
• Combined with Chloprene insert for vibration resistance (e. g. retain capacitors on PCB)
• Suitable for applications needing strength of metal components
• Material: Aluminium alloy (ALU), chloroprene (CR)
• Operating temperature: -20°C to +80°C
• Supplied singly
• Bundle diamater: 4.8mm
• Supplied in natural/black
• Type: ALU-C-P-Clip
• Manufacturer's part: 211-15050 ALU5C

The HellermannTyton 211-15110 ALU11C is an Aluminium Mounting P-Clip that offers a simple way to secure cabling. This clip can hold a 14.3mm cable bundle, and is from the ALU-P-Clip range, is supplied with the Chloroprene insert. It can be used to secure parts subject to vibration (for example to retain capacitors on a PCB).

Manufactured from high quality aluminium, this P-Clip provides flexibility and yet give a permanent fixing in the most arduous environments. The addition of a Chloroprene insert, provides the cable or pipe bundle with a high degree of protection against vibration, reduces noise and also offers electrical isolation.

• Simple, secure pipe or cable fixing (e. g. caravan construction)
• Combined with Chloprene insert for vibration resistance (e. g. retain capacitors on PCB)
• Suitable for applications needing strength of metal components
• Material: Aluminium alloy (ALU), chloroprene (CR)
• Operating temperature: -20°C to +80°C
• Supplied singly
• Bundle diamater: 14.3mm
• Supplied in natural/black
• Type: ALU-C-P-Clip
• Manufacturer's part: 211-15110 ALU11C

The HellermannTyton 211-15150 ALU15C is an Aluminium Mounting P-Clip that offers a simple way to secure cabling. This clip can hold a 20.6mm cable bundle, and is from the ALU-P-Clip range, is supplied with the Chloroprene insert. It can be used to secure parts subject to vibration (for example to retain capacitors on a PCB).

Manufactured from high quality aluminium, this P-Clip provides flexibility and yet give a permanent fixing in the most arduous environments. The addition of a Chloroprene insert, provides the cable or pipe bundle with a high degree of protection against vibration, reduces noise and also offers electrical isolation.

• Simple, secure pipe or cable fixing (e. g. caravan construction)
• Combined with Chloprene insert for vibration resistance (e. g. retain capacitors on PCB)
• Suitable for applications needing strength of metal components
• Material: Aluminium alloy (ALU), chloroprene (CR)
• Operating temperature: -20°C to +80°C
• Supplied singly
• Bundle diamater: 20.6mm
• Supplied in natural/black
• Type: ALU-C-P-Clip
• Manufacturer's part: 211-15150 ALU15C

The HellemannTyton 211-60001 Plastic P-Clip (mounting clip) is from the HP Series. This P-Clip has been manufactured from Polyamide and offers a good temperature resistance as well as offering high strength.

The clip is ideal for permanent or semi-permanent cable fixings, so the P-Clip can be used in a variety of industries. The light weight of these P-Clips makes them particularly suitable for use in the aerospace industry where minimising weight, but retaining a strong fixing is vitally important.

• Colour: Black
• Halogen-free: Yes
• Material: Polyamide 6.6 (PA66)
• Product Specifications: Flame-retardant according to UL94 V2
• Operating temperature range: -40ºC to +85ºC, short-term - +105°C (500h)
• Product Specifications: Flame-retardant properties: in accordance with UL94 V2
• Bundle: 5.0mm
• Type: H1P
• Manufacturer's part: Hellemann Tyton 211-60001

The HellemannTyton 211-60003 Plastic P-Clip (mounting clip) is from the HP Series. This P-Clip has been manufactured from Polyamide and offers a good temperature resistance as well as offering high strength.

The clip is ideal for permanent or semi-permanent cable fixings, so the P-Clip can be used in a variety of industries. The light weight of these P-Clips makes them particularly suitable for use in the aerospace industry where minimising weight, but retaining a strong fixing is vitally important.

• Colour: Black
• Halogen-free: Yes
• Material: Polyamide 6.6 (PA66)
• Product Specifications: Flame-retardant according to UL94 V2
• Operating temperature range: -40ºC to +85ºC, short-term - +105°C (500h)
• Product Specifications: Flame-retardant properties: in accordance with UL94 V2
• Bundle: 8.0mm
• Type: H4P
• Manufacturer's part: Hellemann Tyton 211-60003

The HellemannTyton 211-60004 Plastic P-Clip (mounting clip) is from the HP Series. This P-Clip has been manufactured from Polyamide and offers a good temperature resistance as well as offering high strength.

The clip is ideal for permanent or semi-permanent cable fixings, so the P-Clip can be used in a variety of industries. The light weight of these P-Clips makes them particularly suitable for use in the aerospace industry where minimising weight, but retaining a strong fixing is vitally important.

• Colour: Black
• Halogen-free: Yes
• Material: Polyamide 6.6 (PA66)
• Product Specifications: Flame-retardant according to UL94 V2
• Operating temperature range: -40ºC to +85ºC, short-term - +105°C (500h)
• Product Specifications: Flame-retardant properties: in accordance with UL94 V2
• Bundle: 9.5mm
• Type: H5P
• Manufacturer's part: Hellemann Tyton 211-60004

The HellemannTyton 211-60006 Plastic P-Clip (mounting clip) is from the HP Series. This P-Clip has been manufactured from Polyamide and offers a good temperature resistance as well as offering high strength.

The clip is ideal for permanent or semi-permanent cable fixings, so the P-Clip can be used in a variety of industries. The light weight of these P-Clips makes them particularly suitable for use in the aerospace industry where minimising weight, but retaining a strong fixing is vitally important.

• Colour: Black
• Halogen-free: Yes
• Material: Polyamide 6.6 (PA66)
• Product Specifications: Flame-retardant according to UL94 V2
• Operating temperature range: -40ºC to +85ºC, short-term - +105°C (500h)
• Product Specifications: Flame-retardant properties: in accordance with UL94 V2
• Bundle: 12.5mm
• Type: H7P
• Manufacturer's part: Hellemann Tyton 211-60006

The HellemannTyton 211-60029 Plastic P-Clip (mounting clip) is from the HP Series. This P-Clip has been manufactured from Polyamide and offers a good temperature resistance as well as offering high strength.

The clip is ideal for permanent or semi-permanent cable fixings, so the P-Clip can be used in a variety of industries. The light weight of these P-Clips makes them particularly suitable for use in the aerospace industry where minimising weight, but retaining a strong fixing is vitally important.

• Colour: Natural
• Halogen-free: Yes
• Material: Polyamide 6.6 (PA66)
• Product Specifications: Flame-retardant according to UL94 V2
• Operating temperature range: -40ºC to +85ºC, short-term - +105°C (500h)
• Product Specifications: Flame-retardant properties: in accordance with UL94 V2
• Bundle: 5.0mm
• Type: H2P
• Manufacturer's part: Hellemann Tyton 211-60029

The HellemannTyton 211-60039 Plastic P-Clip (mounting clip) is from the HP Series. This P-Clip has been manufactured from Polyamide and offers a good temperature resistance as well as offering high strength.

The clip is ideal for permanent or semi-permanent cable fixings, so the P-Clip can be used in a variety of industries. The light weight of these P-Clips makes them particularly suitable for use in the aerospace industry where minimising weight, but retaining a strong fixing is vitally important.

• Colour: Natural
• Halogen-free: Yes
• Material: Polyamide 6.6 (PA66)
• Product Specifications: Flame-retardant according to UL94 V2
• Operating temperature range: -40ºC to +85ºC, short-term - +105°C (500h)
• Product Specifications: Flame-retardant properties: in accordance with UL94 V2
• Bundle: 6.5mm
• Type: H3P
• Manufacturer's part: Hellemann Tyton 211-60039

The HellemannTyton 211-60059 Plastic P-Clip (mounting clip) is from the HP Series. This P-Clip has been manufactured from Polyamide and offers a good temperature resistance as well as offering high strength.

The clip is ideal for permanent or semi-permanent cable fixings, so the P-Clip can be used in a variety of industries. The light weight of these P-Clips makes them particularly suitable for use in the aerospace industry where minimising weight, but retaining a strong fixing is vitally important.

• Colour: Natural
• Halogen-free: Yes
• Material: Polyamide 6.6 (PA66)
• Product Specifications: Flame-retardant according to UL94 V2
• Operating temperature range: -40ºC to +85ºC, short-term - +105°C (500h)
• Product Specifications: Flame-retardant properties: in accordance with UL94 V2
• Bundle: 9.5mm
• Type: H5P
• Manufacturer's part: Hellemann Tyton 211-60059

This HellermannTyton Strain Relief Clip (Klam-Klip) can secure leads with a simple one screw fixing. The two halves of the clip are linked to ensure that parts are not lost during any re-wiring, and an anti-rotation pin ensures that the leads do not become twisted during installation.

• Bundle diameter: 4.5 - 5.5mm
• Material: Polyamide 6.6 (PA66)
• Product Specifications: Flame retardant in accordance with UL94 V2
• Mounting hole Ø 5mm
• Bundle F/F2 10.0/4.5mm
• Temperature range: -40°C to +85°C
• For diameter holes between 62 and 90mm
• Dimensions: 22(L) x 8.8(W) x 14.0(H) x 3.5(H2)mm
• Supplied in black
• Type: KK1
• Manufacturer's part: HellermannTyton 234-10100

This HellermannTyton Strain Relief Clip (Klam-Klip) can secure leads with a simple one screw fixing. The two halves of the clip are linked to ensure that parts are not lost during any re-wiring, and an anti-rotation pin ensures that the leads do not become twisted during installation.

• Bundle diameter: 5.5 - 6.7mm
• Material: Polyamide 6.6 (PA66)
• Product Specifications: Flame retardant in accordance with UL94 V2
• Mounting hole Ø 5mm
• Bundle F/F2 10.0/4.5mm
• Temperature range: -40°C to +85°C
• For diameter holes between 62 and 90mm
• Dimensions: 22(L) x 8.8(W) x 14.0(H) x 3.5(H2)mm
• Supplied in black
• Type: KK2
• Manufacturer's part: HellermannTyton 234-10200

This HellermannTyton Strain Relief Clip (Klam-Klip) can secure leads with a simple one screw fixing. The two halves of the clip are linked to ensure that parts are not lost during any re-wiring, and an anti-rotation pin ensures that the leads do not become twisted during installation.

• Bundle diameter: 6.5 - 7.7mm
• Material: Polyamide 6.6 (PA66)
• Product Specifications: Flame retardant in accordance with UL94 V2
• Mounting hole Ø 5mm
• Bundle F/F2 10.0/4.5mm
• Dimensions: 22(L) x 8.8(W) x 14.0(H) x 3.5(H2)mm
• Supplied in black
• Type: KK3
• Manufacturer's part: HellermannTyton 234-10300

Black nylon 20mm Kwik-clip conduit fixing from Hylec. Kwik-clip is a unique and fast way of securing PVC conduit and has many advantages over the traditional spacer bar type saddle.

• One piece construction with integral hinge has a single screw fixing and is re-usable
• Can be re-opened with the aid of a screwdriver
• Moulded from flame retardant nylon
• Complies to BS4607 part 5

Black nylon 25mm Kwik-clip conduit fixing from Hylec. Kwik-clip is a unique and fast way of securing PVC conduit and has many advantages over the traditional spacer bar type saddle.

• One piece construction with integral hinge has a single screw fixing and is re-usable
• Can be re-opened with the aid of a screwdriver
• Moulded from flame retardant nylon
• Complies to BS4607 part 5

The LINIAN 1LCR608 Red FireClip is a single-component fire rated fixing, designed to increase safety and efficiency. This clip is suitable for single cable, with a diameter of 6-8mm, PVC Trunking, or for wire anchor fixings.

With the FireClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LCR682 Red FireClip is a single-component fire rated fixing, designed to increase safety and efficiency. This clip is suitable for double cable, with a diameter of 6-8mm, PVC Trunking, or for wire anchor fixings.

With the FireClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LCR911 Red FireClip is a single-component fire rated fixing, designed to increase safety and efficiency. This clip is suitable for single cable, with a diameter of 9-11mm, PVC Trunking, or for wire anchor fixings.

With the FireClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LCR9112 Red FireClip is a single-component fire rated fixing, designed to increase safety and efficiency. This clip is suitable for double cable, with a diameter of 9-11mm, PVC Trunking, or for wire anchor fixings.

With the FireClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LCW608 White FireClip is a single-component fire rated fixing, designed to increase safety and efficiency. This clip is suitable for single cable, with a diameter of 6-8mm, PVC Trunking, or for wire anchor fixings.

With the FireClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LSB1214 Black SuperClip is a single-component fire rated fixing, providing demonstrable upgrades to both safety and efficiency. This SuperClip is suitable for cable with a 12-14mm diameter.

These clips are the ideal addition to any tool box due to their versatility. SuperClips are suitable for:

• Bunched cables
• SWA cables
• Use with steel cable ties
• Anchor fixings for wire
• PVC/metal conduit
• Use with outdoor trunking

With the SuperClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LSB1518 Black SuperClip is a single-component fire rated fixing, providing demonstrable upgrades to both safety and efficiency. This SuperClip is suitable for cable with a 15-18mm diameter.

These clips are the ideal addition to any tool box due to their versatility. SuperClips are suitable for:

• Bunched cables
• SWA cables
• Use with steel cable ties
• Anchor fixings for wire
• PVC/metal conduit
• Use with outdoor trunking

With the SuperClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LSB1820 Black SuperClip is a single-component fire rated fixing, providing demonstrable upgrades to both safety and efficiency. This SuperClip is suitable for cable with a 18-20mm diameter.

These clips are the ideal addition to any tool box due to their versatility. SuperClips are suitable for:

• Bunched cables
• SWA cables
• Use with steel cable ties
• Anchor fixings for wire
• PVC/metal conduit
• Use with outdoor trunking

With the SuperClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LSB2022 Black SuperClip is a single-component fire rated fixing, providing demonstrable upgrades to both safety and efficiency. This SuperClip is suitable for cable with a 20-22mm diameter.

These clips are the ideal addition to any tool box due to their versatility. SuperClips are suitable for:

• Bunched cables
• SWA cables
• Use with steel cable ties
• Anchor fixings for wire
• PVC/metal conduit
• Use with outdoor trunking

With the SuperClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LSB2325 Black SuperClip is a single-component fire rated fixing, providing demonstrable upgrades to both safety and efficiency. This SuperClip is suitable for cable with a 23-25mm diameter.

These clips are the ideal addition to any tool box due to their versatility. SuperClips are suitable for:

• Bunched cables
• SWA cables
• Use with steel cable ties
• Anchor fixings for wire
• PVC/metal conduit
• Use with outdoor trunking

With the SuperClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LSGALV1820 Galvanised Steel SuperClip is a single-component fire rated fixing, providing demonstrable upgrades to both safety and efficiency. This SuperClip is suitable for cable with a 18-20mm diameter.

These clips are the ideal addition to any tool box due to their versatility. SuperClips are suitable for:

• Bunched cables
• SWA cables
• Use with steel cable ties
• Anchor fixings for wire
• PVC/metal conduit
• Use with outdoor trunking

With the SuperClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LSGALV2325 Galvanised Steel SuperClip is a single-component fire rated fixing, providing demonstrable upgrades to both safety and efficiency. This SuperClip is suitable for cable with a 23-25mm diameter.

These clips are the ideal addition to any tool box due to their versatility. SuperClips are suitable for:

• Bunched cables
• SWA cables
• Use with steel cable ties
• Anchor fixings for wire
• PVC/metal conduit
• Use with outdoor trunking

With the SuperClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LSW1820 White SuperClip is a single-component fire rated fixing, providing demonstrable upgrades to both safety and efficiency. This SuperClip is suitable for cable with a 18-20mm diameter.

These clips are the ideal addition to any tool box due to their versatility. SuperClips are suitable for:

• Bunched cables
• SWA cables
• Use with steel cable ties
• Anchor fixings for wire
• PVC/metal conduit
• Use with outdoor trunking

With the SuperClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LSW2325 White SuperClip is a single-component fire rated fixing, providing demonstrable upgrades to both safety and efficiency. This SuperClip is suitable for cable with a 23-25mm diameter.

These clips are the ideal addition to any tool box due to their versatility. SuperClips are suitable for:

• Bunched cables
• SWA cables
• Use with steel cable ties
• Anchor fixings for wire
• PVC/metal conduit
• Use with outdoor trunking

With the SuperClips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LTEG001.5 Grey T & E Clip is a single-component fire rated fixing, with safety and efficiency at the core of its design. This T & E Clip is suitable for cable with an overall diameter of 9 x 5mm.

With their expect design, these clips can be used with a variety of equipment such as:

• Twin cable
• CPC cabling
• PVC trunking
• Anchor fixings for wire

With the T & E Clips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

The LINIAN 1LTEG002.5 Grey T & E Clip is a single-component fire rated fixing, with safety and efficiency at the core of its design. This T & E Clip is suitable for cable with an overall diameter of 10 x 5mm.

With their expect design, these clips can be used with a variety of equipment such as:

• Twin cable
• CPC cabling
• PVC trunking
• Anchor fixings for wire

With the T & E Clips simple design, there is no need for plugs, screws or washers. The installation has three simple steps; Drill a hole, slide the clip over your cable, and then compress to insert the clip into the hole.

• 18th Edition Compliant
• CE & CA Certified
• Single-component design
• No plugs, screws or washers needed
• Corrosion Resistant & UV Stable
• BSEN 50200 120 minutes fire time
• DIN 4102-12 DIN 90 minutes fire time
• Fire-resistant >1200°C

This Natural Self-Adhesive Cable Clip 4.5mm from PB Fastener & Components is the perfect solution for providing reliable electrical insulation. Manufactured with a self adhesive panel on the back of the clip and equipped with a 4.5mm bundle diameter, therefore making it ideal when used with flex, round cable, lines and pipes.

• Natural colour
• No nails or screws required
• 19 x 19mm (L x W)
• 4.9mm cable width space
• Manufacturer's part 5430

This Black Self-Adhesive Cable Clip 4.5mm from PB Fastener & Components is the perfect solution for providing reliable electrical insulation. Manufactured with a self adhesive panel on the back of the clip and equipped with a 4.5mm bundle diameter, therefore making it ideal when used with flex, round cable, lines and pipes.

• Black colour
• No nails or screws required
• 19 x 19mm (L x W)
• 4.9mm cable width space
• Manufacturer's part 5431-SW

This Black Self-Adhesive Cable Clip from PB Fastener & Components is the perfect solution for providing reliable electrical insulation. Manufactured with a self adhesive panel on the back of the clip and equipped with a 8mm bundle diameter, therefore making it ideal when used with flex, round cable, lines and pipes.

• Black colour
• No nails or screws required
• 26 x 26mm (L x W)
• 12mm cable width space
• Manufacturer's part 5433-SW

This Black Self-Adhesive Cable Clip 14.5mm from PB Fastener & Components is the perfect solution for providing reliable electrical insulation. Manufactured with a self adhesive panel on the back of the clip and equipped with a 14.5mm bundle diameter, therefore making it ideal when used with flex, round cable, lines and pipes.

• Black colour
• No nails or screws required
• 26 x 26mm (L x W)
• 18mm cable width space
• Manufacturer's part 5439-SW

Black polypropylene cable clips for 14 to 20mm diameter round cables.

• For 14 to 20mm round cables
• Colour: black
• For use in wood, compressed board and mortar
• Made from impact-resistant polypropylene - combines strength and elasticity
• Supplied with a zinc-plated hardened-steel nail
• Supplied in packs of 100
• Schneider Electric type 2052051

White polypropylene cable clips for 5 to 7mm diameter round cables.

• For 5 to 7mm round cables
• Colour: white
• For use in wood, compressed board and mortar
• Made from impact-resistant polypropylene - combines strength and elasticity
• Supplied with a zinc-plated hardened-steel nail
• Supplied in packs of 100
• Schneider Electric type 2202000A

Grey plastic Tower cable clips for 2x 1mm² 6242Y style twin and earth cable.

• Colour: grey
• Supplied in packs of 100
• Manufacturer's type 70CGKF10

Impact resistant plastic clips to suit 4mm round profile cables.

• Supplied with hardened fixing nails
• Colour: grey
• Supplied in packs of 100

Impact resistant plastic clips to suit 5mm round profile cables.

• Supplied with hardened fixing nails
• Colour: grey
• Supplied in packs of 100

Impact resistant plastic clips to suit 6mm round profile cables.

• Supplied with hardened fixing nails
• Colour: grey
• Supplied in packs of 100

Impact resistant plastic clips to suit 7mm round profile cables.

• Supplied with hardened fixing nails
• Colour: grey
• Supplied in packs of 100

Impact resistant plastic clips to suit 9mm round profile cables.

• Supplied with hardened fixing nails
• Colour: grey
• Supplied in packs of 100

These self adhesive cable clips are suitable for cables up to 6.3mm diameter.

• Manufactured from soft aluminium on a double-coated polyfoam pad which sticks readily to clean, dry surfaces
• Provides a high level of insulation
• Supplied in packs of 250