A 585 x 450 x 50mm high capacity activated carbon filter for gas and solvent capture.

• Size 585 x 450 x 50mm

A 405 x 320 x 50mm high capacity activated carbon filter for gas and solvent capture.

• Suitable for BenchVent models BV500S-C and BV570H-C
• Size 405 x 320 x 47mm

The BenchVent Air Filtration System BV300S is capable of filtering 325m³/hr of air and is designed to be an occasional 'spray trap' for studio/workshop cleanliness and operator protection from concentrations of airborne contaminants.The spray booth has two filters - a particulate (intake) filter and a carbon impregnated fibre filter. The particulate filter is a 3-stage graduated fibre filter with a high 'dust' holding capacity. The carbon filter assists in the reduction of solvent odours. The unit can be placed in two positions, either an upright position which is best for models and other three dimensional objects or a reclining position which is best for two dimensional artwork to be placed upon the filter. The small size of the unit means that it can be placed upon a desk, bench or carried on a trolley and the spray booth is ideal for use within art, graphics, hobby, modelling and craft environments for the filtration of aerosol adhesives, aerosol lacquers and fixatives and airbrush sprays applied to artwork of up to A2 size, solders, light grinding particles and dusts, cleaning solvents - overall, making the BenchVent Air Filtration System aleading player in its field at an affordable price.

• Quiet in operation
• Steel construction
• Dove grey finish
• Replaceable plastic spray/fume shield
• Back stand/carry handle
• Axial fans
• Sealed electrical wiring and switch, downstream of filters
• Brushless motor with external rotor
• UL, VDE and CSA approved

The BenchVent Graphic Air Filtration System (Flexi-Ducted) BV100H-D is an air extraction unit that is ideally suited to use as spray booths for a wide variety of applications in the studio, classroom or workshop. A 710m³/hr air volume capacity caters for many applications and all odours and gases exrtacted are vented to atmosphere via two flexi-ducts so that the working environment can be kept free of contaminants. The design of the unit means that it is suitable for use with objects such as: prototypes, models, ceramic parts, PCBs, etc. An A2 or an A1 drawing board can be accomodated, being put in at an angle for efficient overspray capture. Air extraction is carried out by two centrifugal blowers via a three stage graduated fibre particulate filter that has a high particle holding capacity, ensuring long filter life. The filtered air is exhausted via a flexi-duct which may be either fixed to a standard domestic vent or placed through any convenient window. This dual process of extraction and filtration greatly reduces or eliminates operator exposure to contaminants and harmful airborne substances.

• Steel construction
• Dove grey finish
• Particulate filter
• Carry handle
• Can be assembled in seconds
• 2x Centrifugal blowers
• Sealed electrical wiring and switch, downstream of filters
• Brushless motor with external rotor
• UL, VDE and CSA approved

The BenchVent Graphic Air Filtration System (Flexi-Ducted) BV200H-D is an air extraction unit that is ideally suited to use as spray booths for a wide variety of applications in the studio, classroom or workshop. A 355m³/hr air volume capacity caters for many applications and all odours and gases extracted are vented to atmosphere via flexi-duct so that the working environment can be kept free of contaminants. The design of the unit means that it is suitable for use with objects such as: prototypes, models, ceramic parts, PCBs, etc. An A2 drawing board can be accomodated, being put in at an angle for efficient overspray capture. Air extraction is carried out by centrifugal blowers via a three stage graduated fibre particulate filter that has a high particle holding capacity, ensuring long filter life. The filtered air is exhausted via a flexi-duct which may be either fixed to a standard domestic vent or placed through any convenient window. This dual process of extraction and filtration greatly reduces or eliminates operator exposure to contaminants and harmful airborne substances.

• Steel construction
• Dove grey finish
• Particulate filter
• Carry handle
• Can be assembled in seconds
• Centrifugal blower
• Sealed electrical wiring and switch, downstream of filters
• Brushless motor with external rotor
• UL, VDE and CSA approved

The BenchVent Graphic Air Filtration System BV100H is capable of filtering 650m³/hr of air and has been designed to be used in the studio/classroom/workshop to protect operators and maintain environmental cleanliness and is ideal for art, graphics, design technology, crafts, modelling, etc. The spray booth uses two filters for effective air filtration. The particulate (intake) filter is a 3-stage graduated fibre filter that has a high particle holding capacity. The second filter is a carbon type filter that assists in the reduction of solvent odours.The design of this spray booth enables it to be used in one of two ways. 3D items such as models, PCBs, etc. may be placed onto the hood base for spraying, cleaning, sanding, etc. For artwork applications the hood enclosure will accept standard A1 drawing boards which may be placed at an angle for efficient overspray capture.

• Quiet in operation
• Steel construction
• Dove grey finish
• Fan/filter unit mounted onto hood enclosure
• Axial fans
• Sealed electrical wiring and switch, downstream of filters
• Brushless motor with external rotor
• UL, VDE and CSA approved

The BenchVent Graphic Air Filtration System BV200H is capable of filtering 325m³/hr of air and has been designed to be used in the studio/classroom/workshop to protect operators and maintain environmental cleanliness and is ideal for art, graphics, design technology, crafts, modelling, etc. The spray booth uses two filters for effective air filtration. The particulate (intake) filter is a 3-stage graduated fibre filter that has a high particle holding capacity. The second filter is a carbon type filter that assists in the reduction of solvent odours. The design of this spray booth enables it to be used in one of two ways. 3D items such as models, PCBs, etc. may be placed onto the hood base for spraying, cleaning, sanding, etc. For artwork applications the hood enclosure will accept standard A2 drawing boards which may be placed at an angle for efficient overspray capture.

• Quiet in operation
• Steel construction
• Dove grey finish
• Fan/filter unit mounted onto hood enclosure
• Axial fans
• Sealed electrical wiring and switch, downstream of filters
• Brushless motor with external rotor
• UL, VDE and CSA approved

The BenchVent TechFlo Fume Cabinet BV500S-C is capable of filtering 325m³/hr of air and is designed for use in situations where external venting is impractical but where there is a need for contaminant capture and air filtration. Especially suitable for use in dental labs, for electronic design and rework, pharmaceutical labs, design technology, science and other industrial and educational uses. Applications for which the fume cabinet is ideal include: filtration of fumes and capture of contaminant particles from monomers, adhesives, hazardous powders/particulates, conformal coatings, resins, sealants, solders, light grinding particles and dust, organic solvents, etc.

In operation the fume cabinet has two stages of filtration. The particulate (intake) filter is a 3-stage graduated fibre filter that has a high dust holding capacity, prolonging its life. The second stage of filtration is by a high grade bonded 3.5kg carbon filter. The high performance of the fume cabinet is aided by a folding clear plastic fume shield that can be removed and stored if not required, reducing the footprint of the unit.

• Steel fan/filter casing
• Dove grey finish
• Folding clear PETG plastic fume shield
• Particulate filter
• Carry handle
• Can be assembled in seconds
• Centrifugal blower
• Sealed electrical wiring and switch, downstream of filters
• Brushless motor with external rotor
• UL, VDE and CSA approved

The BenchVent TechFlo Fume Cabinet BV66OH-D is a fume filtration hood of 355m³/hr air volume capacity intended for use where external venting is required. The attached flexi-duct vents to atmosphere, either through a standard domestic vent or a convenient window. Filtration is carried out by a 3-stage graduated fibre filter with a high dust holding capacity that ensures a long filter life. This dual process of filtration and extraction means that operators and environments are protected from exposure to potentially hazardous substances.The unit may be used both for 3D items such as PCBs, models, etc. and 2D artwork, the unit accepting a standard A2 drawing board. A clear polycarbonate panel is mounted on the hood and hood lighting is also included. The whole unit can be assembled in seconds and may be placed on a desk, bench or trolley. Ideal for use in the workshop, dental/medical labs, design technology classroom, pharmaceutical lab, etc.

• Extraction cabinets vent to atmosphere via flexi-duct of 2m x Ø100mm
• Three-stage particulate filter
• Clear polycarbonate panel for protection
• Hood lighting
• Steel construction with dove grey finish
• Sealed electrical wiring and switch, downstream of filters
• UL, VDE and CSA approved

The BenchVent TechFlo Fume Cabinet BV700S-C is capable of filtering 650m³/hr of air and is designed for use in situations where external venting is impractical but where there is a need for contaminant capture and air filtration. Especially suitable for use in dental labs, for electronic design and rework, pharmaceutical labs, design technology, science and other industrial and educational uses. Applications for which the fume cabinet is ideal include: filtration of fumes and capture of contaminant particles from monomers, adhesives, hazardous powders/particulates, conformal coatings, resins, sealants, solders, light grinding particles and dust, organic solvents, etc.

In operation the fume cabinet has two stages of filtration. The particulate (intake) filter is a 3-stage graduated fibre filter that has a high dust holding capacity, prolonging its life. The second stage of filtration is by a high grade bonded 3.5kg carbon filter. The high performance of the fume cabinet is aided by a folding clear plastic fume shield that can be removed and stored if not required, reducing the footprint of the unit.

• Steel fan/filter casing
• Dove grey finish
• Folding clear PETG plastic fume shield
• Particulate filter
• Dual airspeed function to facilitate higher vapour absorbtion
• Carry handle
• Can be assembled in seconds
• Centrifugal blower
• Sealed electrical wiring and switch, downstream of filters
• Brushless motor with external rotor
• UL, VDE and CSA approved

The BenchVent TechFlo Fume Cabinet BV930H-C is a circulatory fume filtration hood and cabinet, with an air capacity of 710m³/hr, that is ideal for use where contaminant capture and filtration are required but where external venting is impractical. Two stages of filtration, hood lighting and a clear polycarbonate panel that helps protect the operator go towards making this fume cabinet suitable for the filtration of fumes, vapour and particulates emenating from: spray mount adhesives, conformal coatings and paints, monomers, hazardous powders and particulates, resins, sealants, solders, light grinding particles, organic solvents and cleaners, etc. In addition to being ideal for 3D models, a standard A1 drawing board may also be placed within the hood enclosure. The large capacity of this unit makes it at home in dental/medical labs, pharmaceutical labs, design technology workshops, science in education, etc.

• Steel construction with dove grey finish
• Clear polycarbonate panel for protection
• Hood lighting
• Particulate filter
• Two-stage filtration process
• Sealed electrical wiring and switch, downstream of filters
• UL, VDE and CSA approved

A 705 x 502 x 12mm carbon impreganated fibre filter for use with BenchVent fume extraction systems. The filter provides low level solvent odour removal.

• Size 705 x 502 x 12mm
• For BenchVent units BV200S (A200S) and BV100H (A100H)
• Supplied singly

A 495 x 372 x 12mm carbon impreganated fibre filter for use with BenchVent fume extraction systems. The filter provides low level solvent odour removal.

• Size 495 x 372 x 12mm
• For BenchVent units BV300S (A300S) and BV200H (A200H)
• Supplied singly

A 705 x 502mm Filter Kit for use with BenchVent extraction systems. The kit contains 3 particulate filters and 1 charcoal filter, designed for contaiment of particulate overspray and low level solvent odour.

• Contains 3x IFA3 particulate filters and 1x CHA3 Charcoal filter
• For units BV200S (A200S) and BV100H (A100H))
• Size: IFA3: 705 x 502 x 47mm, CHA3: 705 x 502 x 15mm
• Supplied in sets of 4

A 495 x 372mm Filter Kit for use with BenchVent extraction systems. The kit contains 3 particulate filters and 1 charcoal filter, designed for containment of particulate overspray and low level solvent odour.

• Contains 3x IFA3 particulate filters and 1x CHA3 Charcoal filter
• For units BV300S (A300S) and BV200H (A200H)
• Size: IFA3: 495 x 372 x 23mm, CHA3: 495 x 372 x 15mm
• Supplied in sets of 4

This air filtration unit is capable of filtering 650m³/hr of air and is designed to be an occasional 'spray trap' for studio/workshop cleanliness and operator protection from concentrations of airborne contaminants. The spray booth has two filters - a particulate (intake) filter and a carbon impregnated fibre filter. The particulate filter is a 3-stage graduated fibre filter with a high 'dust' holding capacity. The carbon filter assists in the reduction of solvent odours. The unit can be placed in two positions, either an upright position which is best for models and other three dimensional objects or a reclining position which is best for two dimensional artwork to be placed upon the filter. The small size of the unit meana that it can be placed upon a desk, bench or carried on a trolley and the spray booth is ideal for use within art, graphics, hobby, modelling and craft environments for the filtration of aerosol adhesives, aerosol lacquers and fixatives and airbrush sprays applied to artwork of up to A2 size, solders,light grinding particles and dusts, cleaning solvents, etc.

• Quiet in operation
• Steel construction
• Dove grey finish
• Replaceable plastic spray/fume shield
• Back stand/carry handle
• Axial fans
• Sealed electrical wiring and switch, downstream of filters
• Brushless motor with external rotor
• UL, VDE and CSA approved

This air extraction unit uses a flexi-duct to carry away extracted air, either via a standard domestic vent or simply placed through a partially opened window, making the unit very portable and convenient. The unit can be used in one of two positions, either upright for 3D items such as models, PCBs, etc. where they can be rested on the surface and where solder fumes and general solvent and gas extraction is performed. The second position the unit can be employed is in a reclining position which is designed for accommodating artwork up to A3 size for spray mounting, aerosol lacquers and fixatives, etc. Filtration is performed by a particulate (intake) filter that is a 3-stage graduated fibre filter that has a high particle holding capacity, giving the filter a long operational life. Extraction is then performed via the 2m x Ø100mm flexi-duct. This filtration/extraction process vastly reduces and/or eliminates operator exposure to potentially hazardous substances.

• Steel construction
• Dove grey finish
• Replaceable plastic spray/fume shield
• Particulate filter
• Carry handle
• Can be assembled in seconds
• Centrifugal blower
• Sealed electrical wiring and switch, downstream of filters
• Brushless motor with external rotor
• UL, VDE and CSA approved

BenchVent HE/CA/405 filter.

• Size 405 x 320 x 73mm

A 705 x 502 x 47mm EPA Particle Filter.

• EU10 pleated particle filter for fine solder fume particles, fine dusts and powders
• Size 705 x 502 x 47mm

A pack of 6 particle filters, 705 x 502 x 47mm, for general spray and dust particle capture.

• For use with BenchVent units: BV200S (A200S), BV100H (A100H), BV100H-D (A100H-D), BV930H-C (T930H-C), BV930H-D (T930H-D) and BV700S-C (T700S-C)
• Size: 705 x 502 x 47mm
• Supplied in packs of 6

A set of 6 Tanning Mist Filters for A200T tanning units. The set contains 3 IFA2 particle/solution filters and PRE705 pad filters.

• 705 x 502 x 47mm Tanning Mist Filters
• 3 each of IFA2 particle/solution filters and PRE705 pad filters
• For use with A200T tanning units
• Supplied as a set of 6

A pack of 6 particle filters, 495 x 372 x 23mm, for general spray and dust particle capture.

• For use with BenchVent units BV300S (A300S), BV200H (A200H), BV200H-D (A200H-D), BV300S-D (A300S-D), BV660H-C (T660H-C), BV500S-D (T500S-D) and BV660H-D (T660H-D)
• Size: 495 x 372 x 23mm
• Supplied in packs of 6

A set of 6 Tanning Mist Filters for BV500 (S500) and A300T tanning units. The set contains 3 IFA3 particle/solution filters and PRE495 pad filters.

• 495 x 372 x 23mm Tanning Mist Filters
• 3 each of IFA3 particle/solution filters and PRE495 pad filters
• For use with BV500 (S500) and A300T tanning units
• Supplied as a set of 6

A set of 6 blue and white polyester 705 x 502mm filters for use as a pre filter in air conditioning and spray booth ventilation.

• 705 x 502mm
• Can be easily cut down for smaller sizes
• Use as a pre-filter for BenchVent HE705 and IFA2PT
• Supplied in packs of 6

A fume and vapour extraction unit that uses a 2m x Ø100mm flexi-duct to vent harmful and unwanted vapours to either a standard domestic vent or a convenient window. Suitable for use within laboratory, workshop, classroom and anywhere where there is a need for the extraction of fumes and fine particles whilst handling: monomers, adhesives, hazardous powders, conformal coatings, resins, sealants, solders, light grinding particles and dusts, organic solvents, etc. Filtration is carried out by a 3-stage graduated fibre filter that has a high dust holding capacity that prolongs the life of the filter. Performance of this fume cabinet is enhanced by the provision of a clear PETG plastic fume shield which is also removeable, reducing the footprint of the cabinet. The dual process of filtration and extraction together with the design and overall performance of the fume cabinet greatly reduces or eliminates operator exposure to potentially hazardous substances.

• Venting via 2m flexi-duct to atmosphere
• Clear folding plastic fume shield
• Carrying handle
• Use on desk, bench or trolley
• Simple assembly and use
• Particulate filter
• Steel fan/filter casing with dove grey finish
• Sealed electrical wiring and switch, downstream of filters
• UL, VDE and CSA approved

This fume filtration hood of 710m³/hr air volume capacity is intended for use where external venting is required. The attached flexi-duct vents to atmosphere, either through a standard domestic vent or a convenient window. Filtration is carried out by a 3-stage graduated fibre filter with a high dust holding capacity that ensures a long filter life. This dual process of filtration and extraction means that operators and environments are protected from exposure to potentially hazardous substances. The unit may be used both for 3D items such as PCBs, models, etc. and 2D artwork, the unit accepting a standard A1 drawing board. A clear polycarbonate panel is mounted on the hood and hood lighting is also included. The whole unit can be assembled in seconds and may be placed on a desk, bench or trolley. Ideal for use in the workshop, dental/medical labs, design technology classroom, pharmaceutical lab, etc.

• Extraction cabinets vent to atmosphere via 2x flexi-ducts of 2m x Ø100mm each
• Three-stage particulate filter
• Two blowers
• Clear polycarbonate panel for protection
• Hood lighting
• Steel construction with dove gray finish
• Sealed electrical wiring and switch, downstream of filters
• UL, VDE and CSA approved

The TechFlo Filtration Systems, Fume Cabinet BV660H-C is a circulatory fume filtration hood and cabinet, with an air capacity of 355m³/hr, that is ideal for use where contaminant capture and filtration are required but where external venting is impractical. Two stages of filtration, hood lighting and a clear polycarbonate panel that helps protect the operator go towards making this fume cabinet suitable for the filtration of fumes, vapour and particulates emanating from: spray mount adhesives, conformal coatings and paints, monomers, hazardous powders and particulates, resins, sealants, solders, light grinding particles, organic solvents and cleaners, etc. In addition to being ideal for 3D models, a standard A2 drawing board may also be placed within the hood enclosure. The large capacity of this unit makes it at home in dental/medical labs, pharmaceutical labs, design technology workshops, science in education, etc.

• Steel construction with dove grey finish
• Clear polycarbonate panel for protection
• Hood lighting
• Particulate filter
• Two-stage filtration process
• Sealed electrical wiring and switch, downstream of filters
• UL, VDE and CSA approved